The MCN Sport Chambers Performance SRX7 FC Build

[MikeFitz]

Ha ha, thanks lads! Sure we'll give it a shot anyway!
Any fella or girl whos drifting has balls though! Just try twin battling with any of em!
We'll go into reliability and SR's and 13B's and everything when I've time to start a proper argument after the weekend ha ha!
Im not worried though, Darren already has a wealth of knowledge of rotaries and we'll learn as we go so we'll see what happens! Anyway, its time for an update!

[MikeFitz]

The back end is more or less sorted, with all bushes except the front two main subframe bushes (which are solid enough) replaced with polyurethane items from Mazdatrix. The diff is a 4.3:1 two way



The standard camber links are a bit worse for wear and are being replaced by these:



Courtesy of Formuld D driver Justin Pawlak and they're available from mcnsport.com

[peterhouze]

dont worry about reliability you got the best sounding engine now
hope you get it sorted soon

[MikeFitz]

On the front end Holly has fitted the extra lock kit, including rack spacers and ends, also sourced from mazdatrix.com. The ends are adjustable and taller than the standard items and so compensate for the lower ride height and level up the steering arms, helping to reduce bump steer.



And the front bottom ball joints have been replaced with new OEM items



This is the firewall and mounting bracket for the MCNSPORT 25 litre aluminium fuel cell which we are mounting inside the car behing the passenger seat in the name of weight distribution. Holly broke his balls shaping the walls of the firewall to the shape of the floor (THANKS HOL!!!!!)(Oh, and Happy for th
e sweet welding!!!!!)

[MikeFitz]

The fuel cell contains fuel sponge and has an internal swirl pot at the back so that the pump is constantly fed with fuel under acceleration





Bosch 044. Proper!



Sytec in line filter, pump, filter and fittings also available from MCNSPORT

[Famous jh]

Lookin savage Mike, cant wait to hear it!

See ya in Fermyyyyyyyyyyyyyyyyyyyy

[MikeFitz]

And welcome to the Japspeed corner! Massive thanks to Paul from Japspeed www.japspeed.ie and Shane from Drive-N-Style, www.drive-n-style.com the official Irish Japspeed dealer, for jointly sponsoring the following items:



Japspeed three inch front mount intercooler, which we have a few ideas about how to mount (mounting ideas ha ha!)(sorry!!!!!)




And this Skyline rad, which should keep her good and cool



And a Japspeed air filter. Thanks again guys

[MikeFitz]

And how she stood this evening, ready for interior paint. Dans Body Worx FTW!

[S13..KEV]

lads some work.thinking of eveything.i like the no stone unturned way of doing things.mint work from you and the boys at mcn

[Prodrifter86]

ohhhhhhhhhhhhh yes!! jesus this is going to be epic. ! savage work lads