rb box conversion for sr20det????

[Jay Rockett]

WKD have the conversion plates available.

Keep it irish and try help the current climate

Think there an agent for Polo's conversion plates??

So you'd be killing 2 birds with one stone here shane!

[wezwkd]

We have these on the shelf.

We can also fit if required.

[mike g]

We have these on the shelf.

We can also fit if required.

whats the price?

[thegosson]

We have these on the shelf.

We can also fit if required.

are you talking about the plate or the full conversion ?

[Polo]

Yep if you want one of my plates get it throgh WKD.

The only differance on the 180/s13 is the prop, i can supply mesurments and info on places to get the prop done.
The starter you just need to drill the threaded holes out to 11.5mm, some later starters (s14a/s15) need some of the location skirt trimming off but its like 2mins with a grinder.

There is one threaded hole in the bell housing that needs drilling to 11.5mm too(is at about 4-5oclock looking at the housing from the engine side)
The shifter hole in the body needs elongating 60mm forword.

All the sr sensors (appart from the speedo) screw streight in to the rb box so no need to splice wires. The speedo needs splicing, with 4.1:1 diff and 17" wheels it spot on by GPS.

The GTST box x member mates streight up using either the rb or sr mount, the GTST x member is the same as an s14 auto member, so you can use one of them if you cant get GTST.
All parts are from r33 GTST, thogh you can fit any RB box configeration using the plates.


I can supply modded props or hole conversions, but idealy would need to be done throgh WKD as he is my IRL dealer and i dont want to tread on his turf

The conversion is very simple and takes no longer than 30mins longer than a normal box change.

[barryl]

if there was enuf interest maybe a group buy might be an idea. was checking them out in garage WKD during the wk an there top quality

[bart]

isnt JR doing them aswell????????
think go with ones from wez...
ya can see what his ones look like

[Polo]

isnt JR doing them aswell????????
think go with ones from wez...
ya can see what his ones look like

I have a feeling JR's ones are going to look like the ones Wez is selling

Like i said befor, the only real ones sold in IRL will have the WKD logo on.

[barryl]

isnt JR doing them aswell????????
think go with ones from wez...
ya can see what his ones look like

would ya like a spoon to stirr that up ted

[yowdy]

seen these plates when polo was up getn a headlam here there top notch quality so id defo advise ya goin to wez