Follow Us On Follow us on Facebook
Register
Page 3 of 16 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 151
  1. #21
    Senior Member jeff nelson sileighty's Avatar
    Status
    Offline
    User ID
    1464
    Join Date
    Jun 2010
    Location
    kildare
    Posts
    1,294
    Blog Entries
    1

    Default

    Quote Originally Posted by Diesel-Dick View Post
    tbf now in ur case all that needs to be done is make 2 new front legs and weld them to ur hoop, not that expensive it would be madness to change ur whole cage
    I know ya but at the same time its still money i dont have yano and many people are guna be rightly stuck now because of it....i know i went on a bit of a rant in my last post but its not fair for them to decide that at this point


  2. #22
    Thread Rapist!!! Diesel-Dick's Avatar
    Status
    Offline
    User ID
    1683
    Join Date
    Aug 2010
    Location
    Dungarvan, Co. Waterford
    Posts
    954

    Default

    Quote Originally Posted by jeff nelson sileighty View Post
    I know ya but at the same time its still money i dont have yano and many people are guna be rightly stuck now because of it....i know i went on a bit of a rant in my last post but its not fair for them to decide that at this point
    i know wat u mean lad i agree rules should have been announced alot sooner! but my basic point was u dont need to change whole cage. id say some lads have alot of changes to make


  3. #23
    di Member Falvey's Avatar
    Status
    Offline
    User ID
    334
    Join Date
    Aug 2009
    Posts
    85

    Default

    Quote Originally Posted by Diesel-Dick View Post
    tbf now in ur case all that needs to be done is make 2 new front legs and weld them to ur hoop, not that expensive it would be madness to change ur whole cage
    Is this allowed? The impression I get is that the only bolt in cages allowed are fully fia approved non dash dodgers? Does this not mean that if you have a dash dodger and cut the two front legs and replace them it is no longer fia approved?? Confusion :-(

    TeamBarrysMotorsport

  4. #24
    di Member garyae86's Avatar
    Status
    Offline
    User ID
    1846
    Join Date
    Sep 2010
    Location
    Leitrim
    Posts
    1,257

    Default

    Quote Originally Posted by Falvey View Post
    Is this allowed? The impression I get is that the only bolt in cages allowed are fully fia approved non dash dodgers? Does this not mean that if you have a dash dodger and cut the two front legs and replace them it is no longer fia approved?? Confusion :-(
    very good point but i can see alot off lads trying it any way as the rules took to long to come out and there is people not ready what else can they do ????

    [SIGPIC][/SIGPIC]

  5. #25
    Senior Member
    Status
    Offline
    User ID
    2253
    Join Date
    Jan 2011
    Location
    Cavan
    Posts
    1,150

    Default

    I dont understand why they are banning cutting the bulkhead, the have made cars with modified bulkheads almost invalueable overnight and why give the drivers of these cars such an advantage.

    Quote Originally Posted by Prodrifter86 View Post
    for sure. Duane can drive. for a 15/16 year old to drive a car like his does. u kinda have to a head on ya to do it even without bhp. God bless the instructor when he does his driving test in a year or 2. lol! haha

  6. #26

    Default

    Quote Originally Posted by Falvey View Post
    Is this allowed? The impression I get is that the only bolt in cages allowed are fully fia approved non dash dodgers? Does this not mean that if you have a dash dodger and cut the two front legs and replace them it is no longer fia approved?? Confusion :-(
    Who said anything about cutting.? What people are saying is to get two new front bars made up that go through the dash and that bolts on or is welded on properly to the rest of your existing cage. I cannot see how they could have a problem with this provided it is done properly with the right steel and joints.
    I have looked hard everywhere and there is not actually anyone who makes a bolt in thru dash fia approved roll cage off the shelf for an s13 unless you get one custom made and bol@x to that if they think I am forking out for that. I am going getting two new front bars made up and if they dont like it they can shove their prodrift up their behind coz we all have driftfest now and we dont depend on them anymore.Thats my opnion on the matter anyway. Peace


  7. #27
    Pro Driver
    Status
    Offline
    User ID
    466
    Join Date
    Sep 2009
    Posts
    662

    Default

    Oh the drama over 2 pieces of pipe


  8. #28
    di Member Falvey's Avatar
    Status
    Offline
    User ID
    334
    Join Date
    Aug 2009
    Posts
    85

    Default

    Quote Originally Posted by sideways boy View Post
    Who said anything about cutting.? What people are saying is to get two new front bars made up that go through the dash and that bolts on or is welded on properly to the rest of your existing cage. I cannot see how they could have a problem with this provided it is done properly with the right steel and joints.
    I have looked hard everywhere and there is not actually anyone who makes a bolt in thru dash fia approved roll cage off the shelf for an s13 unless you get one custom made and bol@x to that if they think I am forking out for that. I am going getting two new front bars made up and if they dont like it they can shove their prodrift up their behind coz we all have driftfest now and we dont depend on them anymore.Thats my opnion on the matter anyway. Peace
    Looks like I touched a sensitive spot lad relax, the rules are nothin to do with me, I'm just trying to get as much info as I can before I do anything with my own dash dodger, peace.

    TeamBarrysMotorsport

  9. #29
    Chris Martina
    Status
    Offline
    User ID
    377
    Join Date
    Aug 2009
    Posts
    2,853

    Default

    Ok ok ok ok ok ok lads use yer well educated brains here, the problem ye have here is a question that you need to ask ,in the rules it states about a particular cage is only acceptable ,R I G H T ! (in john cleese voice) now go pick up the phony woney and nicely contact prodrift and im sure eitheir graham sarah or john will oblgingly advise you on how to cheaply and effectivley overcome the problem about making yez-ur dash doger a non dash dodger !!! and be acceptable to the rules......

    And if you think out side the box john stone (THE NEW SCRUTINY MAN)is an extremely good fabricator as is the mc namara guys who are all involved in prodrift ,you could give them the job to do im sure at a fair price to keep your budget down ..........

    YOURS, Mammy chris.........

    Quote Originally Posted by Robbie Daly Ps13 View Post
    He came up we chatted for a while nice fella to talk to all the same but he seemed very twitchy and i never trust a twitchy person....!
    !

  10. #30
    Thread Rapist!!! Diesel-Dick's Avatar
    Status
    Offline
    User ID
    1683
    Join Date
    Aug 2010
    Location
    Dungarvan, Co. Waterford
    Posts
    954

    Default

    Quote Originally Posted by git View Post
    Ok ok ok ok ok ok lads use yer well educated brains here, the problem ye have here is a question that you need to ask ,in the rules it states about a particular cage is only acceptable ,R I G H T ! (in john cleese voice) now go pick up the phony woney and nicely contact prodrift and im sure eitheir graham sarah or john will oblgingly advise you on how to cheaply and effectivley overcome the problem about making yez-ur dash doger a non dash dodger !!! and be acceptable to the rules......

    And if you think out side the box john stone (THE NEW SCRUTINY MAN)is an extremely good fabricator as is the mc namara guys who are all involved in prodrift ,you could give them the job to do im sure at a fair price to keep your budget down ..........

    YOURS, Mammy chris.........
    shut up chris that would be the sensible thing to do! now everyone lets ignore him and get back to having an argument!!


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •