Offset for 180sx Q's

[Prodrifter86]

Hey guys i wanting to pick up a set of wheels for my 180sx (on standard rear quarters) i have Measured the offset on the wheels i have and i think they came out at 17x9.5 et 20..... i see wheels im looking at in et20 but 9j? has anyone have pictures of there own car on a 17x9 et 20? i want the wheels to sit right on the arches and look pretty cool.... any help would be appriecated....

[Keith_200SX]

I'm in the process of playin with offset to,
This is a rear 17x10 et 5



And this is a front wheel 17x9 et15
Nice tyre stretch and minimal camber it'll be perfect

[subzero]

std rear hubs and calipers ??

[PepperS13]

Will fit dead on . Roll arches and put 15mm spacer on also , I had 18x10 et24 with a 225/40 tyre on rear a mine and just rolled the inside lip

[thegosson]

That second picture is of the rear too, is it not?

[Keith_200SX]

std rear hubs and calipers ??

Yep 4 stud!
Second pic is a front wheel,

[subzero]

When i had std 180 hubs and brakes, i ran viennas 9.5 +5 , very stretched tire, just a rolled arch on the rear. Had an 8.5 on front with a plus 24 or so (was still some room for a little more)

[Driftma]

I've had 17x9j et12 with a 25mm bolt on spacer on the front with standard lca's and 17x9j et12 on the rear with a flare with no problems