My 180sx, project ebay!

[danmoorhead]

seen dis today shes a lil flyer!!! i used a toyosport dwn pipe b4 and ended up haven to cut the fuker up to make it fit!! but i built the barney ps13 off ebay!! to be fair 99% of stuff is spot on!!

[blusrule]

seen dis today shes a lil flyer!!! i used a toyosport dwn pipe b4 and ended up haven to cut the fuker up to make it fit!! but i built the barney ps13 off ebay!! to be fair 99% of stuff is spot on!!

Thanks Dan, didn't see you over there. Seems to be going alright anyway so happy enough with it! Everything I've bought so far seems to be decent enough, used all proper bits on the fuel and cooling but after that not much harm a cheaper part can do!

Have a few vids but shit bog internet won't let me upload

[blusrule]

Long time since I updated this!

Decided that standard power or lock wasn't enough so sorted those out.

Lock wise I got modded hubs off Stevo and Tein extra lock steering arms from driftworks. Nice difference to be had on a budget.

Power wise I got a T28 turbo,
550 injectors (http://www.ebay.ie/itm/Nissan-200SX-...item232c480eef)
and z32 AFM.

Replaced any boost hoses that were left to be replaced with Autosiliconehoses hoses and brought the car to TDP for mapping.

Got the car back a couple of days later, with no drama, mapped on nistune to just over 300hp. Very happy with the way the car drives and had in in Mondello for a track day and Tynagh for a drift day since and it went really well.







So I was all set for driftfest masters and then the shit hit the fan, 80euro down and no competitions to do. Went to IDC Punchestown and decided that IDC was the way to go so rang ROCO the following week and got the car in for a cage, very nice job. I never thought of photos before I put it back together but cannot recommend the man enough!









When in Tynagh I decided that the 16s were a bit small now that I had a bit more power so I ordered up some rims





Problem with these is they were a bit much for standard arches with no spacer!



So I got onto Bart and he sorted arches and a front bumper for me, havn't got the bumper fitted yet but the car looks alot better with the 50mm arches fitted








Thats all for now, hope to have some proper photos before IDC round 3!

[grange]

the wheels make a huge difference fairplay man cool bus

[jeff nelson sileighty]

Fuckin hell those wheels really make some difference , looks the tits

[RobbyS13]

Serious car man looks mental with the new wheels.

[blusrule]

Bit of an update.......How the car looked before IDC3 Ennis







Handling was crap on the day, really threw myself in the deep end with the track in Ennis. So hard to get the nack of! Got the alignment done by John Doyle and had the car out for IDC5 mondello



Also went to the Just Jap drift days in Mondello







Really getting used to this car now and loving every moment! Big step up from the bmw any day! Few random pics....






Going to the Just Jap day at the end of the month and then it's into the shed for a winter tidy up!

[wayne.c]

can't wait to drive it again on the 30th. seen that you striped my car

[blusrule]

Need to do something, you were being left behind! Should be interesting the 30th!

[blusrule]

Small update! Happy new year and all that jazz!

New year, new colour! Decided that I needed something to make the car more recognisable so picked out a completely random purple off colour charts in Doyle Autobody Bunclody. Had the car back in just over a week and am absolutely delighted with the quality of the work they did!

Also fitted a spoiler, clear and red tail lights and full headlights. Think it all ties together really well!













Few plans before IDC starts, have a blow at the manifold and to fix and re-do the whole rear suspension bushes. Looking forward to a good 2014!!