Ali-d1936's S15 Spec-R

[ali-d1936]

hmm i would love to movethe fuse box into where the passanger airbag was but i planned on sorting the engine bay and engine side of things next year, might just pull it out and oute it through the bay for now i should have done that the first time but ya live and learn, any tips for bringing it through the bay?

[ali-d1936]

Lobbed on the bumper and lowered the rear,

before i started a better look at the arches





took it down the road and nearly destroyed the front bumper so ill have no choice but to lift up the front a bit, but before that im going to put the transport box on the John deer and pull out the margin in the middle of the road seems the easier solution... migh have to do the road all the way into sligo then aswell :P haha

[Spartacus]

That looks savage man fair play, just keep rolling and pulling the fenders, no need for overfenders. Looks perfect as is. Just hammer and modify everything as is until its driveable like that.

[paddyb01]

Your other bumper looked better....

[Dave]

That is the perfect s15! Please do not put overfenders on the car. As said above pull the shit out of the original arches. Would not change a thing about it!

[subzero]

man its a serious lookn s15, what offset wheels are on the front ? they rubbing ?? tiz a pain lowering an s15 as the front bumper sticks so far out in front of the car and hits the ground very easy.

[ali-d1936]

man its a serious lookn s15, what offset wheels are on the front ? they rubbing ?? tiz a pain lowering an s15 as the front bumper sticks so far out in front of the car and hits the ground very easy.

18x10 -6 give or take a lil bit but thats what i worked them out to be, rubbing on everything at that height lol, ill have to cut up the metal to try and lift the entry point of both the bonnet cable and loom because as soon as you full lock with the suspension compresssed the tyre will clean them out haha. ya it is and the bumper was so expensive i dont want to destroy it within the first week on the road, might trim the bottom of it and lift it up a half inch will make things so much easier but not keem on that either.

That is the perfect s15! Please do not put overfenders on the car. As said above pull the shit out of the original. Would not change a thing about it!

ha cheers ill have a think about it.

Your other bumper looked better....

Serious? i hated that bumper the fit around the lights was horrible, and was never keen on the gap between the lights filled up.

That looks savage man fair play, just keep rolling and pulling the fenders, no need for overfenders. Looks perfect as is. Just hammer and modify everything as is until its driveable like that.

ya lots of chainsaw craftsman ship going into it now , had to cut a lil lip to make room for the rear camber arms today to get it sitting right, front inner arches are getting a beating now for room

[paddyb01]

Ah might be just me so mate i hate the gap between the lights if your sellin the other bumper i might take it

[ali-d1936]

ya sure let me know what its worth to ya and ill have a think about it, have another vertex bumper aswell so its a bit surplus.

its just a vertex fiberglass bumper with the peice off a original bumper bonded onto it.

[paddyb01]

ya sure let me know what its worth to ya and ill have a think about it, have another vertex bumper aswell so its a bit surplus.

its just a vertex fiberglass bumper with the peice off a original bumper bonded onto it.

Ah was thinking i never seen one without the gap in the middle
if you get a chance could you pm me some better pic of it thanks