Well this is like ripping my heart out but I am starting to think having this as my one and only car is a bit silly and I could do with something a bit more normal and maybe something cheaper to drift.
The car is amazing; I have no hesitation in saying that. I have built a few cool cars in my time but this is my masterpiece so far. Everything I done to the car (and there was a lot of stuff!) had at least twice as much research and thinking go into it as it actually took to do the job. I used all the best parts I could afford. This car was built as a competition spec drift car that was still usable on the road and has been built to look as good as it performs.
I will happily hold onto the car forever if I don’t get what I believe to be good money for it and if I had a bit more money I would not even think of doing this.
Well enough talk, onto the spec:
Just under 12 months Tax and MOT.
Engine:
180SX straight cam SR20DET: The rarer and in my eyes better of the SRs. This engine is absolutely spot on. It has 150psi+ on all 4 of the cylinders and has never given an ounce of trouble.
Garrett 2871R .64 turbo: Again in mint condition, no smoke or funny noises. Only about a year old.
Turbo fitted with all new braided lines with fire shield protection and all new banjo bolts and copper washers.
Nismo 740cc injectors: Direct plug in fit for SRs
Adjustable FPR
Standard Exhaust Manifold modified to take a 38mm Turbosmart external wastegate: This has a number of benefits.
Firstly the standard manifold will not crack like many aftermarket ones will also using an external wastegate complete rules out the possibility of boost creep that these turbos can often suffer with.
Custom made screamer pipe: Vented to atmosphere, sounds mental!
Ultra rare D-max one-piece elbow/downpipe with oval section under the car. Never hits the ground!
Custom made 3 inch S/S single box system
Apex-i Air filter
Z32 AFM
Blitz Dual SBC boost controller
Custom made 3 inch S/S intake pipe with brand new silicone joiners and high quality hose clamps.
Koyo alloy rad
Completely custom made inboard Rad/IC setup: Made to move more of the weight back in the car and also to keep the intercooler from being damaged on track. All pipe work was made from brand new 3 inch S/S piping using brand new silicone joiners and brand new high quality hose clamps. I have never had a boost pipe blow off this car.
RB viscous van fitted: Good upgrade over SR item
Brand new genuine Nissan water pump just fitted
Brand new Nismo thermostat just fitted,
Nismo engine mounts,
Just serviced using Motul 300v 15w50 and HKS oil filter: The best you can buy! This oil change cost me over £100
Nistune ECU.
GTR fuel pump,
Mapped by TDP in Ireland to 389bhp at 1.4 Bar. Goes very well and with the screamer pipe sounds amazing too.
Transmission:
Exedy light weight flywheel: Was re-surfaced before installation
Exedy Stage 2 paddle clutch
Stock SR box with uprated GKtech brass shifter bush and uprated stronger gear shifter return springs. Really tightens up the shifter.
DW Poly Gearbox mount,
Braided clutch line,
Kaaz 2 way diff in 4.08 Non ABS casing: Diff has been rebuilt and locks up hard.
R33 GTST 5 bolt halfshafts
Suspension/Steering:
Tein Superdrift coilovers: In mint condition, no leaks or rattles.
DW adjustable front upper camber arms
Tein tension rods with the bush offset for more steering angle clearance
S14 front lower arms lengthened 20mm, plated for strength and notched for more steering angle. Fitted with DW inner polybushes and brand new ball joints
Modified front hubs for quicker steering and more steering angle
180SX engine crossmember modified to move the rack forward to eliminate over centre, done in an extremely clean manner, you wouldn’t even know looking at the crossmember.
180SX rack fitted with poly rack bushes,
Tein tie rods and ends, tie rods lengthened to suit modified hubs and wider front track,
Steering column piece lengthened to suit rack relocation and fitted with DW solid bush,
S14 rear subframe fitted with offset flush mounting solid bushes: This is a great mod as the S14 frame is wider and also offers more traction and also completely gets rid of Hicas replacing with much stronger toe arms.
HICAS system completely removed from car.
Solid diff bushes
Adjustable toe, camber and traction arms,
DW poly bushes fitted to hubs and also lower arms,
HKS Kansai rear strut brace,
Front strut brace,
Interior:
7 point Cusco through dash cage with added bolt on double door bars: Cage is up to the spec of any European drift series I have looked at and has already passed Prodrift scrutiny. It is fully bolt in so can easily be removed/refitted if there is ever a need for a re-shell because of accident damage.
Driver and Passenger Sparco Pro2000 Kevlar fixed bucket seats mounted on DW Superlow subframes,
Drivers 6 point 3 inch harness with aircraft style buckle,
Nardi Steering wheel fitted with Genuine HKB boss and snap-off boss,
Nismo gear knob,
Battery cut off switch mounted in centre console,
Battery mounted in secure battery box in the boot,
DW Spin turn Handbrake button,
Leather gear gaiter,
CD head unit with USB port and iPod/iPhone compatibility,
New uprated speakers fitted front and rear so good sounds too,
Set of 4 rare special edition Greddy Silver faced Gauges, do not confuse these with the more common white faced items, the silver face is far rarer. The 4 gauges are Oil Temp, Oil Pressure, Water Temp, Boost all in working condition,
Brakes:
Stock R32 GTST brakes front and rear,
DW braided brake lines fitted front and rear.
Wheels/Tyres:
Front: 17x9 ET19 Work VS-KF (fitted with 20mm bolt-on spacers), 215/40/17 Toyo T1Rs
Rear: 18x9.5 ET1 Work VS-KF, 225/40/18 Achilles ATR Sports
Exterior:
4 piece BN sports bodykit,
D-max Style rear over fenders,
Genuine D-max D1 Spec front wings,
Genuine D-max roof spoiler,
GTR style bonnet fitted with Aerocatches,
N1 style ‘brick’ headlights,
Genuine Nissan clear/orange type indicators,
N.B. Veilside rear boot spoiler will NOT be sold with the car,
Respray in red.
Security:
Thatcham CAT 1 Alarm system fitted just 1 week ago, complete with 2 fobs, manual and installation certificate.
Bad points:
Not many at all really, the only thing is this is a drift car and it has been used as one. As such there are a few marks on the bodykit but nothing major at all, no huge bits missing or anything.
Speedo doesn’t work, never really bothered me I use a GPS for a more accurate speed reading.
Price:
It was never going to be cheap and even at the price I am putting the car up for I am losing money. I would be a small bit negotiable on price but if I don’t think your offer is enough I will tell you so. I don’t need to sell this car and would be only too happy to hold onto it.
Update 16/03/2013: I did the last Lydden drift day where the car got a little beat, both bumpers are in pretty bad shape but cable tied together and I gave the quarter a little rub on the wall. Car is still 100% Mechanically though and is a beast easily ripping in 3rd in the dry and 4th in the wet.
£8,500 without wheels, rear spoiler and metal bonnet back on. Can also lower the price a bit more if I take some more bits off. Will also consider P/Xs. In particular JZX100s
Car is currently located in Surrey, U.K. but I am willing to help out any overseas buyers who may be interested in any way.
and one to show the lock.
and how is stands as of today would easily be 100% mint again with a couple of bumpers and some paint:
Link to build thread: http://www.driftworks.com/forum/drif...orts-sr32.html
video of it in action: BILLY SUTTON - SOUTHERN STYLE SR32 on Vimeo






















Reply With Quote
cant refuse that billy


