Anyone set up 2nd set of calipers on 180sx

[jap scrap]

Just wondering has anyone set up a second set of calipers on nissan hubs for the handbreak i have to set up something like this because handbreak is shit in the car just wondering what calipers did ye use and any pic would be savage of where ye actually set it up.

[gem-s13]

no need realy lad just buy a set of skline twin pots for the rear and will never look back!

[jap scrap]

Do they fit inside a 15" wheel i was going to set up a seperate system because bleeding the h break has been a cunt

[Driftma]

ya they fit with 15 inch equips anyway

[robbie@tdp.ie]

Just wondering has anyone set up a second set of calipers on nissan hubs for the handbreak i have to set up something like this because handbreak is shit in the car just wondering what calipers did ye use and any pic would be savage of where ye actually set it up.

You juts need the right handbrahe leaver and cylinder and the std calipers should be able to lock up 15" no problem.

By far the cheapest way of doing it.

Robbie

[jap scrap]

There is s14 calipers on it and i put a new girling .625 cylinder on it calipers working fine i had them on my s14 before with project mu pads it should lock by just touching it but no i have to drag out of it to get it to lock.
Its a pain in the hole i see one of the lads in a m3 manta he has a set of fiesta front calipers on the back for the handbreak and similar leaverage to mine and a small nip and they lock solid every time

[robbie@tdp.ie]

There is s14 calipers on it and i put a new girling .625 cylinder on it calipers working fine i had them on my s14 before with project mu pads it should lock by just touching it but no i have to drag out of it to get it to lock.
Its a pain in the hole i see one of the lads in a m3 manta he has a set of fiesta front calipers on the back for the handbreak and similar leaverage to mine and a small nip and they lock solid every time

You need to use a AP 14mm cylinder and some Ferrodo pads in the back and all fixed.

[damodeane]

i have the skyline set up there chris

[martycturbo]

the 200sx ca18 shoes inside the disc also works well , i just had to drill a new hole in the disc as i was 5 stud,,