rb25 refusing the start

[PeterT]

I had a rough lap in my r32 in mondello and when i came in was spluttering and them wouldn't start, turns out I frayed the loom on full lock and it was messing with fuelling and spark and all! Maybe worth checking?

[sil80drifter]

I had a rough lap in my r32 in mondello and when i came in was spluttering and them wouldn't start, turns out I frayed the loom on full lock and it was messing with fuelling and spark and all! Maybe worth checking?

checked the loom under the arch and its perfect

[skinnynphats200]

I had a rough lap in my r32 in mondello and when i came in was spluttering and them wouldn't start, turns out I frayed the loom on full lock and it was messing with fuelling and spark and all! Maybe worth checking?

Will check this today anyway, thanks

[skinnynphats200]

Its not the tps for me and the wiring under the arch is fine too. @Sil80drifter, did you figure yours out yet?

[sil80drifter]

Its not the tps for me and the wiring under the arch is fine too. @Sil80drifter, did you figure yours out yet?

No man, tried easy start and nothing at all, puzzled at this stage

[skinnynphats200]

No man, tried easy start and nothing at all, puzzled at this stage

Mine turned out to be fpr, one the lads just figured it out there block the return line and try crank it

[damodeane]

this happened to mine ,just after coming off the rollers ,spin up the road then left up ,tryed all the mentioned above and in the end it was the ecu not getting full voltage,pulled a wire from the ignition to the ecu power supply and away she went ,

[sil80drifter]

Mine turned out to be fpr, one the lads just figured it out there block the return line and try crank it

Did that there tonight and it made no difference at all

[skinnynphats200]

3 fprs, 2 fuel pumps, a full day of pricking about and an afm later and it turned out to be the afm and not the fpr that we originally thought! Anybody got a rb20 afm?