decided give calipers bit of clean, gave them a blast of break cleaner and wire brush. then 3 coats later of high tempeture paint
fitted brembozzz and PBR's Front
Rear
Happy out, really sets the TE's off!
![]()
decided give calipers bit of clean, gave them a blast of break cleaner and wire brush. then 3 coats later of high tempeture paint
fitted brembozzz and PBR's Front
Rear
Happy out, really sets the TE's off!
![]()
Small update, right not 100% happy with suspension so gonna change drop links front,a-roll bar bushes all round and outter tie rods (poss teins). was tryin get polys for anti roll bar but not havin much luck. any1 can help me out with that??pulled out all old bits,some were in very bad condition!!
decided to clean up the anti-roll bars, 1in primer
should be sorted out in week or so, any ready for set up with Wez![]()
just read all this from start to finish man really well done the car and work gone into
it is top notch.. no corners cut, everything done properly so well done again man..
you seem a sound owld fella too infairness so i wish ya good luck with it man
im sure twill end up perfect just the way ya want it![]()
Had engine dampner for RB20 but will not fit since 25 has been fitted! So got new RB25 dampner from Japspeed. Was havin wee look there needs wee adjustments but will fit!
![]()
lots and lotsa updates loving this thread ... shes never ending suppoze , like you say '' for life '' fair play man , there mustnt be a stock part left all uprated .... and again fair play lotsa dedication inthis cant wait to see er man savage bus![]()
Yet again a sound, sound chapthanks stevo!! wel ha, there is not alot original parts now, the windows I tink lol. Ah ya know urself, as said before I WOULD NOT BE DOIN THIS only for the history of the car, only the best for BUTCHY(the legend) il have bring you for spin bro, il drop you pm when tink headin for mondello if your up for the gander.
cheers
Car is on bit of go slow which not to happy bout, just not gettin time cause flat out working which is good complaint. But collecting Tein tie rods this week,front& back drop links on way,there was tiny bit of play in1of the rear pillow rose links so their gone into bin!!and as far as im aware barrys motorsport can get me poly's for drop links all round the anti-roll bushes... handbrake has to be mounted too and plannin on 26th this month goin to Taffy&Gary's new track,hopefully down to Wez the wkend before hand.. So all go to make this happen
Nice 1 team micko mukumotyohaha yea all can do is hope I get it ready for then, should do but jus chattin Ste der he hopin set his car up same day I was hopin ta. Faith is a big defo with me man, without it Iv nothin
Are you comin to that 26th sure go on,go on, go on
Thanks a mill for sound comment, bro from a diff moyup yup