love this man its a sweet s15
Unreal 15 man, fair fucks to yaDon't ever sell her!
Update Time..
supected a leak in my exhaust manifold, so striped it out, to find nasty crack. While I had it out i decided to port the GTRS turbo wastegate as i had always had problems with boost creep ever since the turbo was fitted.
Sure while i had the car apart why not treat the engine with some new engine bits.
so started ordering
- cosworth 1.1mm gasket
- ARP head studs
- BC Ti spring retainers
- Tomei Type A springs
- supertech valve seals
removed the head and found cams and rockers had some wear so..
more ordering..
- Tomei TypeR cams 256degree 11.5mm lift
- new rocker arms
- new cam spray bars
sure with everything out and on the kitchen counter why not attempt some light porting..
while doing all this work i remeber i had a plenum that i have ordered a few years ago but never fitted... so lets try get this on..
some polishing....
cyclinder head back on and assembly begins.
Last edited by raytsang; 28-10-13 at 12:15.
small update?? lol
Epic car man and done to the highest standard fair play mate!
the engine looking class now any future plans now?
have still load of small bits and peice i have collected over the years, plans to get them all on the car and enjoy it.
Current plans to get it running so i can drive to work and get the grocerys
im just waiting on a few custom bit and peice to be made up so i can get the car started up and get the timing right , full alignment and a tune![]()
update me thinks.
as i haven't update it in a while, rebuild went well car been up running for a good while now. all aligned and mapped up on normal applegreen petrol
only just gotten around to dyno the car.
shes running 1.5 bar now making 380bhp / 360ft/lb. fly.
slight prblem with boost droping of need to get it sort.
Last edited by raytsang; 28-10-13 at 12:16.