Follow Us On Follow us on Facebook
Register
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: S14a flatspot

  1. #1
    di Member lsd32's Avatar
    Status
    Offline
    User ID
    50
    Join Date
    May 2009
    Posts
    719

    Default S14a flatspot

    Lads my s14a has a flat spot or a small bit of a hesitation between 3k and 4k,pulls like a train over them revs its like a small miss or hesitation just between them revs,I changed plugs and checked for boost leaks,any thoughts??

    If you think you can,or you think you can't,your probably right!

    www.ryansautomotive.ie

  2. #2
    di Member lsd32's Avatar
    Status
    Offline
    User ID
    50
    Join Date
    May 2009
    Posts
    719

    Default

    Any ideas??

    If you think you can,or you think you can't,your probably right!

    www.ryansautomotive.ie

  3. #3
    di Member
    Status
    Offline
    User ID
    168
    Join Date
    Jun 2009
    Posts
    3,608

    Default

    has it still got the vvt spocket fitted??


  4. #4
    Site Trader: TDP - Trackday Performance
    Status
    Offline
    User ID
    480
    Join Date
    Sep 2009
    Posts
    532

    Default

    Quote Originally Posted by lsd32 View Post
    Lads my s14a has a flat spot or a small bit of a hesitation between 3k and 4k,pulls like a train over them revs its like a small miss or hesitation just between them revs,I changed plugs and checked for boost leaks,any thoughts??
    Is it mapped ?

    What AFM has it got ?

    What Boost is it making ?

    What plugs are you using ?

    What plug spark gap have they got ?

    Regards

    Robbie


  5. #5
    di Member Boo s13's Avatar
    Status
    Offline
    User ID
    831
    Join Date
    Jan 2010
    Posts
    117

    Default

    Had this before turned out my fuel pump was on the way out


  6. #6
    di Member lsd32's Avatar
    Status
    Offline
    User ID
    50
    Join Date
    May 2009
    Posts
    719

    Default

    Still has the vvt sprocket fitted
    Fully standard engine running standard boost,and afm on standard map
    Totally standard car plugs are ngk bcr8es

    If you think you can,or you think you can't,your probably right!

    www.ryansautomotive.ie

  7. #7
    Site Trader: TDP - Trackday Performance
    Status
    Offline
    User ID
    480
    Join Date
    Sep 2009
    Posts
    532

    Default

    Quote Originally Posted by lsd32 View Post
    Still has the vvt sprocket fitted
    Fully standard engine running standard boost,and afm on standard map
    Totally standard car plugs are ngk bcr8es
    Try a plug gap like 0.6mm and see if it improves. If it dose then it may be running too rich or too lean and a quick spin on the dyno would find the problem straight away instead of spending loads changing parts.

    Robbie


  8. #8
    Junior member
    Status
    Offline
    User ID
    1530
    Join Date
    Jul 2010
    Posts
    79

    Default

    I had this problem with mine...

    It turned out to be the Air Flow meter was dirty , took it out oppened it and cleanned the little resistor with a cotton bud , put it back in and car was perfect....

    Mine is N/A tho but its worth a try in yours as its a ten min job


  9. #9

    Default

    Possible knock sensor fault...

    10.5sec 1/4 mile @140mph Fastest s14 in Europe down 1/4 mile...

  10. #10
    Team Nocturnal batman026's Avatar
    Status
    Offline
    User ID
    1013
    Join Date
    Feb 2010
    Location
    Corcaigh
    Posts
    2,163

    Default

    i had this problem and changed the fuel filter and that sorted it/also make sure you dont have a boost leak anywhere

    Follow us on Facebook, CLICK the picture and LIKE please.
    <a href="https://www.facebook.com/pages/Team-Nocturnal/245958445511099?ref=tn_tnmn"><img src="http://i49.tinypic.com/bhktvp.jpg"></a>

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •