Front wheel fitment question (180sx)

[TIMMY495]

Hey guys just wondering what offset on 17" x 9 GTR alloys you would recommend for my 180sx with 25mm wider front wings, Ive my mind made up on the rear wheels, im looking for front wheels that hopefully wont rub, im tinkin 17" gtr alloys, 9" wide maybe et25? or that too much or less? ive feck all experience with offsets so any help would be great? any suggestions? thanks in advance

[ken red 180]

I'm running 18x 9-5 off set is +20 with tein xtra lock arms and it works a treat with my wide arch no need for spacers.....

[TIMMY495]

I'm running 18x 9-5 off set is +20 with tein xtra lock arms and it works a treat with my wide arch no need for spacers.....

oh rite? did u av to move the wiring on d inside of the wing? wat size tyres u running dude?

[serious tom]

I have 245's 40's on a 8j rim at the front. Offset +24.
haven't got a chance to get a proper run at it but on full lock to one side it is giving something the I'd touch.
I'd say you might be tho, cause the GTR's are et35 are they nit? How are you spacing them?

[TIMMY495]

I have 245's 40's on a 8j rim at the front. Offset +24.
haven't got a chance to get a proper run at it but on full lock to one side it is giving something the I'd touch.
I'd say you might be tho, cause the GTR's are et35 are they nit? How are you spacing them?

like i say im not too sure bout offsets, was hoping not to have spacers at all

[jdmjimmy]

il hopefully be fitting before the weekend ssr sp1's 17x9 et30 so il let ya know how that goes on standard wings should be fun ..s14 hubs an lca's arb erc

[Newsome]

Youd probly want the +12 offset if you dont want to run spacers because +30 sits nearly flush on the standard arch.

[Stevo]

My 180 has 16" rota's 8j et10 and the rears are flush with the arches fronts would need a 10mil spacer to be the same as the rear..

If your running 25mm wider front wings et12 or below with spacer id say Darraghs the man to ask to jdm tyte yo fitment

[Stevo]

Youd probly want the +12 offset if you dont want to run spacers because +30 sits nearly flush on the standard arch.

Ive 8j et10 and there in need of a 10mil spacer to be flush on the front..

Wheres the wheel whores at

[TIMMY495]

Youd probly want the +12 offset if you dont want to run spacers because +30 sits nearly flush on the standard arch.

hmmmmm maybe +12 is d way to go, dey only offer in 9.5" at a smallest wit dat offset

My 180 has 16" rota's 8j et10 and the rears are flush with the arches fronts would need a 10mil spacer to be the same as the rear..

If your running 25mm wider front wings et12 or below with spacer id say Darraghs the man to ask to jdm tyte yo fitment

mite give him a pm so, i was running that size on my grids for a year an dey wer perfect , but im gone to five stud now. ah well , suppose its trial an error