fitting hydro

**johnbro** · 23-02-11, 13:48

Originally Posted by cooks86

Johnbro was lookin at tramp drift.com and they had thread with diagrams how to fit was very good

i must check that out throw up a link if ya get a chance

**skinnynphats200** · 23-02-11, 13:50

Originally Posted by johnbro

cheers for d help lad, do you mean buckleys builders providers??
I'll be doing mine on the weekend expect lots of stupid questions on here

Yeah thats where I mean, some great stuff in there for makin up good strong mounts and cheap as fook!!!

**cooks86** · 23-02-11, 14:45

Originally Posted by johnbro

i must check that out throw up a link if ya get a chance

I will tonight only on phone at moment

**paddyb01** · 23-02-11, 14:55

theres the link i had it bookmarked
http://www.trampdrift.com/index.php?...166&Itemid=760

**johnbro** · 23-02-11, 15:26

Originally Posted by paddyb01

theres the link i had it bookmarked
http://www.trampdrift.com/index.php?...166&Itemid=760

that's for bleeding not installing.
Quite a funny read though

person 1 and person 2
step 1 open door
step 2 sit in car

**babyeater690** · 23-02-11, 17:42

sorry meant to post how i got on i got it sorted for mondello i cut the pipe that came from the master cylinder half way down the car i bought the tool to spread the end of the copper pipe so it wasent really that hard to do. the pipe from the master cylinder is connected to the rear connection of the hydro and the front connection is connected to the rear calipers. to bleed the system i didnt touch the hydro i just bled it from the break pedal and it worked a charm only for i done it out side in the pissings of rain hope this helps

**ste** · 23-02-11, 17:55

mine is plumbed in dame as your but mine needs a good hard yank is yours a gentle tug or????

**babyeater690** · 23-02-11, 18:07

just a small pull and it locks up the rear if it takes a good pull to lock them up check the rear pads and discs and bleed the system again i first bled the system and it was kinda hard so i bled it again and its really light now the more air in the system the harder you have to pull for pressure

**cooks86** · 23-02-11, 20:40

this is the link john lad took ages haha

http://www.trampdrift.com/Forum/TD/s...ead.php?t=2735

**Stevo** · 23-02-11, 20:41

Originally Posted by ste

mine is plumbed in dame as your but mine needs a good hard yank is yours a gentle tug or????

Bahaha sum man ste

Thread: fitting hydro

Thread Tools

Search Thread

Display

Posting Permissions