fitting hydro

[babyeater690]

rite lads gona fit the hydro in the soarer the weekend gona get the lines made up dose anyone have pics or vids of this been done like how the y piece ant the back is done and do you take it from the master cylinder to the hydro and then to the rear or just tap of thanks in advace

[johnbro]

rite lads gona fit the hydro in the soarer the weekend gona get the lines made up dose anyone have pics or vids of this been done like how the y piece ant the back is done and do you take it from the master cylinder to the hydro and then to the rear or just tap of thanks in advace

I'm in the same boat lad I'm fitting my hydro the weekend too,

The master cylinder is fed into the hydro then back to the rear brakes
that's the part I don't really get either
I bought a handbrake kit in murray motorsport but the lines are only like 1 meter each, doesn't look to be enough the lad in murrays said it's standard
Also I didn't get a T peice ???

Help please someone

[lsd32]

Just disconnect the brake line that goes to the rear of the car from the master cylinder and put one of your lines in there,that line is your feed to the REAR connection of the hydro.then the other line goes from the front of the hydro to the rear of the car.you don't need a t-piece as there is already one on the rear of the car.just bleed it out then.I find that the best way is to not touch the wand and just bleed it out with the pedal but everyone has their own opinion on this

[babyeater690]

ye sounds simple enough but i will have to wait and see how i get on yous all better be on hand tomaro if i run into problem

[johnbro]

So If i do that maybe the short pipes would do
Does that mean the foot pedal will only operate the front brakes and hydro for the rear?

[nick180sx]

So If i do that maybe the short pipes would do
Does that mean the foot pedal will only operate the front brakes and hydro for the rear?

you'll still have your rears on the pedal,its just diverted through the handbrake