Fully built SR20DET S15 engine, brand new!!

Printable View

29-06-10, 20:23
Stonie

Fully built SR20DET S15 engine, brand new!!

This was to be for my own car but due to a little bad luck I have to sell it:-(
Engine is not even built yet so is really a new engine.

Spec...
S15 det engine
ACL race series main and big end bearings (new)
polished crank shaft
Carrillo forged H section rods (new)
Wossner forged 0.5 oversize pistons (new)
CNC surfaced head and block
Block bored and honed in TDP
Cosworth steel headgasket (new)
Valves all checked and re lapped back in
Tomei 264 cams (only not new part but perfect)
Rocker stoppers (unknown make)

Will be freshly built for whoever is interested. Every part will be washed and cleaned properly before being built. I also work in TDP so I know how put together a good engine.

2500euro including donor engine so is not expensive for what your getting.
Spec can be slightly changed to suit if needs be.
This engine will be good for 500+ horsepower with the right turbo and management!

0851509973
30-06-10, 19:16
Stonie

Bump it up!! Cheap proper built engine!!
30-06-10, 19:31
Robbie Daly Ps13

Jesus if it was a month or 2 down the line id be very interested in this.....! Cheap engine.......!
30-06-10, 19:34
Stonie

Quote:

Originally Posted by Robbie Daly Ps13

Jesus if it was a month or 2 down the line id be very interested in this.....! Cheap engine.......!

For what your getting it's definatly cheap lad, your right!!
30-06-10, 19:36
danmoorhead

price it up lad the parts alone would cost this witout labour and machine work and you get an engine as well!!!!
30-06-10, 19:38
Stonie

Quote:

Originally Posted by danmoorhead

price it up lad the parts alone would cost this witout labour and machine work and you get an engine as well!!!!

I know dan but need the cash ya know yourself, it's killing me to sell it only after getting all the bits together! Has to go!!
30-06-10, 21:57
Drift_sil80

would you have to do much changing to put it into a 180?
30-06-10, 23:03
Stonie

Quote:

Originally Posted by Drift_sil80

would you have to do much changing to put it into a 180?

It goes straight in all you really need to change is the intake side boost pipe. Use an s14 rocker cover so you can use normal coil packs, that's basicly it!!
01-07-10, 21:22
Drift_sil80

well

Quote:

Originally Posted by Stonie

It goes straight in all you really need to change is the intake side boost pipe. Use an s14 rocker cover so you can use normal coil packs, that's basicly it!!

i have a redtop engine in it at the moment and i have a black top loom and i have a redtop apexi pfc would it all work if i bought the engine off you? i only have a s14 turbo though?
02-07-10, 16:15
Stonie

Quote:

Originally Posted by Drift_sil80

i have a redtop engine in it at the moment and i have a black top loom and i have a redtop apexi pfc would it all work if i bought the engine off you? i only have a s14 turbo though?

Just give us a buzz man and il run through it with ya!!!

0851509973
02-07-10, 23:46
d1ro

looking for a s15 engine my self for my own car, have a 2.1 ltr sr in d garage and a 2.2tomei but all i really want is a standered engine for this particular car, if you have one let me know
05-07-10, 20:07
Stonie

Up to the top....