Follow Us On Follow us on Facebook
Register
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Pro Driver
    Status
    Offline
    User ID
    371
    Join Date
    Aug 2009
    Posts
    1,080

    Default Fully built SR20DET S15 engine, brand new!!

    This was to be for my own car but due to a little bad luck I have to sell it:-(
    Engine is not even built yet so is really a new engine.

    Spec...
    S15 det engine
    ACL race series main and big end bearings (new)
    polished crank shaft
    Carrillo forged H section rods (new)
    Wossner forged 0.5 oversize pistons (new)
    CNC surfaced head and block
    Block bored and honed in TDP
    Cosworth steel headgasket (new)
    Valves all checked and re lapped back in
    Tomei 264 cams (only not new part but perfect)
    Rocker stoppers (unknown make)

    Will be freshly built for whoever is interested. Every part will be washed and cleaned properly before being built. I also work in TDP so I know how put together a good engine.

    2500euro including donor engine so is not expensive for what your getting.
    Spec can be slightly changed to suit if needs be.
    This engine will be good for 500+ horsepower with the right turbo and management!

    0851509973


  2. #2
    Pro Driver
    Status
    Offline
    User ID
    371
    Join Date
    Aug 2009
    Posts
    1,080

    Default

    Bump it up!! Cheap proper built engine!!


  3. #3
    ..................!
    Status
    Offline
    User ID
    685
    Join Date
    Dec 2009
    Posts
    3,043

    Default

    Jesus if it was a month or 2 down the line id be very interested in this.....! Cheap engine.......!


  4. #4
    Pro Driver
    Status
    Offline
    User ID
    371
    Join Date
    Aug 2009
    Posts
    1,080

    Default

    Quote Originally Posted by Robbie Daly Ps13 View Post
    Jesus if it was a month or 2 down the line id be very interested in this.....! Cheap engine.......!
    For what your getting it's definatly cheap lad, your right!!


  5. #5
    Pro Driver
    Status
    Offline
    User ID
    171
    Join Date
    Jun 2009
    Posts
    1,693

    Default

    price it up lad the parts alone would cost this witout labour and machine work and you get an engine as well!!!!


  6. #6
    Pro Driver
    Status
    Offline
    User ID
    371
    Join Date
    Aug 2009
    Posts
    1,080

    Default

    Quote Originally Posted by danmoorhead View Post
    price it up lad the parts alone would cost this witout labour and machine work and you get an engine as well!!!!
    I know dan but need the cash ya know yourself, it's killing me to sell it only after getting all the bits together! Has to go!!


  7. #7
    Senior Member
    Status
    Offline
    User ID
    882
    Join Date
    Jan 2010
    Location
    kerry
    Posts
    479

    Default

    would you have to do much changing to put it into a 180?

    [SIGPIC][/SIGPIC]

  8. #8
    Pro Driver
    Status
    Offline
    User ID
    371
    Join Date
    Aug 2009
    Posts
    1,080

    Default

    Quote Originally Posted by Drift_sil80 View Post
    would you have to do much changing to put it into a 180?
    It goes straight in all you really need to change is the intake side boost pipe. Use an s14 rocker cover so you can use normal coil packs, that's basicly it!!


  9. #9
    Senior Member
    Status
    Offline
    User ID
    882
    Join Date
    Jan 2010
    Location
    kerry
    Posts
    479

    Default well

    Quote Originally Posted by Stonie View Post
    It goes straight in all you really need to change is the intake side boost pipe. Use an s14 rocker cover so you can use normal coil packs, that's basicly it!!
    i have a redtop engine in it at the moment and i have a black top loom and i have a redtop apexi pfc would it all work if i bought the engine off you? i only have a s14 turbo though?

    [SIGPIC][/SIGPIC]

  10. #10
    Pro Driver
    Status
    Offline
    User ID
    371
    Join Date
    Aug 2009
    Posts
    1,080

    Default

    Quote Originally Posted by Drift_sil80 View Post
    i have a redtop engine in it at the moment and i have a black top loom and i have a redtop apexi pfc would it all work if i bought the engine off you? i only have a s14 turbo though?
    Just give us a buzz man and il run through it with ya!!!

    0851509973


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •