Printable View
right im nearly sure i have all the parts i need now for a decent powered s14
heres what i have
fmic
air filter
mani
elbow
down pipe
decat
cat back
walbro pump
Z32 air flow meter
fuel pressure reg
boost controler
turbo timer
power fc on the way
brand new coilovers
anything else i need?
cheers in advance
decent turbo :)
i got offered a hks t24 turbo is it?Quote:
Originally Posted by mike g
with a new head gasket and new arp head studs for 750 quid today
decent enough?
of you could give me your s14...would be easier :D
i never heard off a hks t24 lol..Quote:
Originally Posted by Gitzer
or maybe if you sold all them bits and that you could get my 14!! work out cheaper in the long run!! lol
£££££££££££££££££££££££££ £££££££££££££Quote:
Originally Posted by Gitzer
ah its something along the lines of that ...hks t something i cant rememberQuote:
Originally Posted by mike g
was to busy handing over 1300 quid for other parts haha
this better be worth it
i spend that for a turbo alone!! 1300 x 3 will get you a decent powered 14.. believe meQuote:
Originally Posted by Gitzer
ah for feck sake.....
and i thought these wer gna be much better to mod then hondas.....power per euro gain
Decent set of injectors, new tubby maybe a t28r off a s15?
Maybe something bigger gt2871r?
Then a remap should get you a few more horses
yup and u will need a decent clutch, and a remap.. lolQuote:
Originally Posted by Gitzer
sorry meant to say i have a set of sard 550'sQuote:
Originally Posted by bnollie
ah il prob just map her with the standard tubby at the start...whats the max they can take...1bar?
well if its a t28 in her with them mods you might be looking up around the 280bhp-300bhp bracket if your lucky.Quote:
Originally Posted by Gitzer
Then you could do internals cams,pistons etc
Also metal head gasket
By the way what ecu is in it now?
must have a map to run a z32 afm and injectors??
Don't worry ted. They won't be going in until the car is going for a mapQuote:
Originally Posted by bnollie
decent turbo lad and you are good for 300-340 mapper depending,
iv a hks gtss here for sale very good turbo for an sr20 no lag and good for 340bhp iv one on my drift car
With z32 and 555's on a t28 with the supporting mods you'll see in and around 300-310bhp, depending on the turbo condition of course. You still need ECU and map, clutch and brakes cos you'll need it to stop too! As the lads said you'll need plenty of €'s its a slippery slope:D
As said a power fc is in the post as we speak. I have everything except a bigger turbo so