Printable View
what would cause an rb to suddenly not start? after i spun out on track it just refuses to start now all of a sudden, its gettin fuel into the rail, the plugs are sparking but still no joy. Have checked intercooler pipes, afm, ecu, all wire/fuses etc but still cant find the problem, can anyone shed light on this???
was going fine up untill a blow out on the back left and from that point on wont start, its turning over perfectly but its not even trying to fire
Could be the cam angle sensor.
Ironic....I'm having the same problem this evening myself. Turned on car and was running fine. Took it for spin couple hundred metres coz I was checking if wheels were rubbing after fixing from my off in mondello. Got out left it idle for minute or two and it just cut out out of the blue and now won't tick over. It's getting fuel, has new plugs, piping, afm etc are grand too. sorry for the hijack man, but if some1 could help I would be getting out of a hole too
Forgot to mention, I changed that and still the sameQuote:
Originally Posted by Cooldrft
Throttle sensor id say just on plug a drop of WD40 and plug it back in happened mine before and this solved it. It only cuts out when you let it tick over but will run if you how the throttle?Quote:
Originally Posted by skinnynphats200
Yeah if I let it tick over it will just cut out after 2 or 3 seconds. But when I crank it over and feather the throttle it will eventually start and if I keep feathering the thottle it will keep running but is very lumpy, misfiring and won't revc up high unless if I feather the throttle to get it to do it. Where is the throttle sensor on the rb?Quote:
Originally Posted by keith_b
I had a rough lap in my r32 in mondello and when i came in was spluttering and them wouldn't start, turns out I frayed the loom on full lock and it was messing with fuelling and spark and all! Maybe worth checking?
checked the loom under the arch and its perfectQuote:
Originally Posted by PeterT
Will check this today anyway, thanksQuote:
Originally Posted by PeterT
Its not the tps for me and the wiring under the arch is fine too. @Sil80drifter, did you figure yours out yet?
No man, tried easy start and nothing at all, puzzled at this stageQuote:
Originally Posted by skinnynphats200
Mine turned out to be fpr, one the lads just figured it out there block the return line and try crank itQuote:
Originally Posted by sil80drifter
this happened to mine ,just after coming off the rollers ,spin up the road then left up ,tryed all the mentioned above and in the end it was the ecu not getting full voltage,pulled a wire from the ignition to the ecu power supply and away she went ,
Did that there tonight and it made no difference at allQuote:
Originally Posted by skinnynphats200
3 fprs, 2 fuel pumps, a full day of pricking about and an afm later and it turned out to be the afm and not the fpr that we originally thought! Anybody got a rb20 afm?