Printable View
Seen a diff advertised on dd as a cusco 2 way.
its out of the car so can't be tested so I'm just wondering is there any absolute sure way of knowing if it is a 2 way or just 1 way???
I thought if the cups turn in the same direction it is a 2 way but is this the case??
cheers
Take off the back casing and you shouldnt see any holes in the diff like a standard 1. Should be just solid and most of them would have a make on it aswel.
Two ways have holes in the diff the same as vicous diffs but they dont have spider gears like the viscous hope this helps you a bitQuote:
Originally Posted by Newsome
if you open it up you should see this thru the hole on the diff.
2way
http://www.ppi-ats.com/images/LSD_basic_2way.jpg
1.5way
http://www.ppi-ats.com/images/LSD_basic_1.5way.jpg
1 way
http://www.ppi-ats.com/images/LSD_basic_1way.jpg
taken from
http://www.ppi-ats.com/LSD/LSD_basics.html
cheers guys helpful info there.
the guy refuses to open the back casing for a look so he's just full of shit, probably welded
Best pics I could find of a viscous diff showing the spider gears
http://photos-g.ak.fbcdn.net/hphotos..._8000021_n.jpg
do you reckon a viscous would be any good?Quote:
Originally Posted by tweek
i have one lying here just need to recase it but would it be worth the money of recasing it even??
i wouldnt bother with the viscs.ud would be better with a 2way.like you said yesterday.might as well get a proper one and be done with it and spend money on the engine:p ..that one sounds dodgy as fuck if he wont let you open it.
@tweek so it that was a two way the spider gears wouldnt be in the middle of the whole?
ya im thinking the same, the viscous one im on about is your one, was it shite??Quote:
Originally Posted by dermot-r32
ha no money being spent on the car for a long time bar the diff!
ya i wouldn't touch it when he wont open it up, dodgy out!
Wouldn't deal with him at allQuote:
Originally Posted by dil
Shim up the vlsd you have , cost ye a tenner and the price of oil, really easy to do with pretty good results, of course will always depend on what you want out of the car,,,Quote:
Originally Posted by dil
the one i had was very good.always locked in 2nd in the wet and dry without fail.puling 2nd is as brave as i got with that diff.haQuote:
Originally Posted by dil
how do you actually shim a diff?? i was offered one on here alright, is it as cheap as that??Quote:
Originally Posted by slithertooth
would it be worth my while using it or would i just want a 2 way after a while haQuote:
Originally Posted by dermot-r32
a good ratio mig-way :D FINEST
well i took it out for a 2way so that says which id pick.haha.if you have the money.try get a 2way,IMO its worth having
Pretty much the same as on nissans as they are quite interchangeable but for cheap and easy results this will tell ye all
http://www.skylinesaustralia.com/for...-for-r33-gtst/