Printable View
Hey guys i wanting to pick up a set of wheels for my 180sx (on standard rear quarters) i have Measured the offset on the wheels i have and i think they came out at 17x9.5 et 20..... i see wheels im looking at in et20 but 9j? has anyone have pictures of there own car on a 17x9 et 20? i want the wheels to sit right on the arches and look pretty cool.... any help would be appriecated....
I'm in the process of playin with offset to,
This is a rear 17x10 et 5
http://i1195.photobucket.com/albums/...psqyvj5r9n.jpg
And this is a front wheel 17x9 et15
Nice tyre stretch and minimal camber it'll be perfect
http://i1195.photobucket.com/albums/...pskbpnptpe.jpg
std rear hubs and calipers ??
Will fit dead on . Roll arches and put 15mm spacer on also :), I had 18x10 et24 with a 225/40 tyre on rear a mine and just rolled the inside lip
That second picture is of the rear too, is it not?
Yep 4 stud!Quote:
Originally Posted by subzero
Second pic is a front wheel,
When i had std 180 hubs and brakes, i ran viennas 9.5 +5 , very stretched tire, just a rolled arch on the rear. Had an 8.5 on front with a plus 24 or so (was still some room for a little more)
I've had 17x9j et12 with a 25mm bolt on spacer on the front with standard lca's and 17x9j et12 on the rear with a flare with no problems