Project s12.................!

Printable View

Show 40 post(s) from this thread on one page

30-01-12, 20:17
Robbie Daly Ps13

Project s12.................!

Right guys im not a big old skool head really but I kinda got landed with this yoke and planned on doing it after the s13 was finished....! Been waiting on parsts for the 13 and had a quite week so said Il do a bit on it but it is on the long finger....!

Plan was to just bang an sr in it and spray it and drop it on a set of 15's but as usuall i got a bit carried away with my mad ideas...! Shes 83 so kinda classic and ya don't see to many old nissans knocking about either and she's old Irish reg....!

So started off by whipping the old engine out...!

http://i857.photobucket.com/albums/a...m/830d0ed9.jpg

http://i857.photobucket.com/albums/a...m/0622518d.jpg

http://i857.photobucket.com/albums/a...m/9fe27981.jpg

http://i857.photobucket.com/albums/a...m/dfa90e84.jpg

I was ready to size the engine in and make up new mounts when i said id have a look at the subframes to see how they compare....! Turned out they were pretty similar so just had to drill out a couple of holes to mount the s13 subframe...! Even the topmounts for the coilovers even fitted so I decided to go with it and run all s13 front suspension...!

Old subframe out...!

http://i857.photobucket.com/albums/a...m/bbb55833.jpg

Nwew one sized up and fitted....!

http://i857.photobucket.com/albums/a...m/d710604c.jpg

http://i857.photobucket.com/albums/a...m/5f3b2554.jpg

http://i857.photobucket.com/albums/a...m/86ff87d6.jpg

Rest of the gear bolted up....!

http://i857.photobucket.com/albums/a...m/22df7191.jpg

Ended up with a bit wider track.... :)

http://i857.photobucket.com/albums/a...m/903523b3.jpg
30-01-12, 20:31
Darenm

Yes.......

I love u Robbie s12 are so sexy ;)
30-01-12, 20:40
slithertooth

Deadly.... this is gonna be good
30-01-12, 20:43
Robbie Daly Ps13

So now I could use the mounts that were on the subframe so just banged it in...! Ended up pretty close to the bulk head and the box was very tight...! Took a bitta beating with the hammer.... :)

http://i857.photobucket.com/albums/a...m/f9fb006f.jpg

Had to cut a new whole for the box...!

http://i857.photobucket.com/albums/a...m/2f013ed2.jpg

Did a bitta modding on the standered mount and she worked out nicely...!

http://i857.photobucket.com/albums/a...m/61f01f37.jpg

http://i857.photobucket.com/albums/a...m/f99b1238.jpg

Then joey arrived in with his new equips so I just had to try em on...! I think after this photo I may get myself a set.... :)

http://i857.photobucket.com/albums/a...m/1aa81801.jpg

http://i857.photobucket.com/albums/a...m/28441ef7.jpg

http://i857.photobucket.com/albums/a...m/f864845d.jpg

So then went about welding in new mounting points fot the castor arms as the old ones were different...!

http://i857.photobucket.com/albums/a...m/60968a95.jpg

http://i857.photobucket.com/albums/a...m/9fd02e86.jpg

http://i857.photobucket.com/albums/a...m/c357bb8f.jpg

http://i857.photobucket.com/albums/a...m/74c72909.jpg

http://i857.photobucket.com/albums/a...m/d88dd68c.jpg

So that was the front more or less sorted now onto the rear end.... :)
30-01-12, 20:50
haydn itr

really cool never see them nocking about. the equips suit it down to the ground
30-01-12, 21:13
Robbie Daly Ps13

Right so hears where the fun began....! After doing a bit of searching for s12 coilovers and parts i kinda realised that there non exsitant...! I was after buying a full s13 donar car with a few bits on it coilovers running gear exausts ect so I had all the gear there to bang a s13 rear end in it...! Turned out a lot harder than the front with everything being different...! So kinda the same job as putting 1 in a twincam...!

So i sized it up and did involve a bitta cutting even cutting the chasis in a couple of places...! Even the turrets were completly different so would have to make up new ones...! My motto is "fuck it go for it" so thats exactly what i did...! I get enjoyment outta hardship and i don't think anythings fun if its easy.... :)

Pic of the old setup in the car...!

http://i857.photobucket.com/albums/a...m/80bd97cc.jpg

And out on the ground...!

http://i857.photobucket.com/albums/a...m/3c050612.jpg

Sized it up...!

http://i857.photobucket.com/albums/a...m/7b0be067.jpg

And started cutting.... :)

http://i857.photobucket.com/albums/a...m/4034d407.jpg

http://i857.photobucket.com/albums/a...m/9f27b99d.jpg

Bent a couple of pieces up to patch back in...!

http://i857.photobucket.com/albums/a...m/bcc8255a.jpg

http://i857.photobucket.com/albums/a...m/01f181bc.jpg

http://i857.photobucket.com/albums/a...m/5cd83869.jpg

Made up new mounts for the front section...!

http://i857.photobucket.com/albums/a...m/d593632d.jpg

http://i857.photobucket.com/albums/a...m/392b0742.jpg

And welded the bolt in...!

http://i857.photobucket.com/albums/a...m/d54cf38f.jpg

http://i857.photobucket.com/albums/a...m/20e2ac95.jpg

Made up the rear ones also...!

http://i857.photobucket.com/albums/a...m/1b04cefe.jpg

http://i857.photobucket.com/albums/a...m/94acef77.jpg

http://i857.photobucket.com/albums/a...m/a03d842c.jpg

After a shitload of mesuring i welded them in...!

http://i857.photobucket.com/albums/a...m/67e10984.jpg

http://i857.photobucket.com/albums/a...m/ed4bdd1c.jpg

http://i857.photobucket.com/albums/a...m/c19642a2.jpg

http://i857.photobucket.com/albums/a...m/c8456ee8.jpg

So went about cutting the old turrets out and cut the ones out of the donar car and try use em....! I think its gonna work but its all trial and error....!

http://i857.photobucket.com/albums/a...m/9f256cda.jpg

http://i857.photobucket.com/albums/a...m/f5c301ab.jpg

Test fit...!

http://i857.photobucket.com/albums/a...m/c4bf42b2.jpg

Cut the rest out and just tacked them in for the muinte....! Still a bit unsure about this...!

http://i857.photobucket.com/albums/a...m/14cd15f4.jpg

Bolted all my subrframe and arms up...! The 13 cambe arm woundn't work with the angle of the coilover so used s14 ones...! Its as far as I am but it all looks ok so far...!

http://i857.photobucket.com/albums/a...m/6b355602.jpg

http://i857.photobucket.com/albums/a...m/4a4c4e8f.jpg

Wheels on 2mor and hope 4 the best..... :) And yes serious overkill for a road car I know..... :P
30-01-12, 21:31
joeymc

is this thing fucking done yet? possibly your best project yet bob nice wheels by the way lol
30-01-12, 21:33
Micko

Not bad for a carpenter:p

Good job Bob!
30-01-12, 21:37
jdmjimmy

Brave Man hope it turns out well have yet to see one of these done right.. fair bit of work gone in already
30-01-12, 21:44
Robbie Daly Ps13

Quote:

Originally Posted by joeymc

is this thing fucking done yet? possibly your best project yet bob nice wheels by the way lol

Dunno bout the best yet...!

Quote:

Originally Posted by Micko

Not bad for a carpenter:p

Good job Bob!

Imagine what a hortaculturist could do if he put his mind to it.... :)

Quote:

Originally Posted by jdmjimmy

Brave Man hope it turns out well have yet to see one of these done right.. fair bit of work gone in already

Im probally more stupid than brave... :) At the moment I can see why it won't work...! When you say you have yet to see on done right I presume your on about twin cams..... ?

Show 40 post(s) from this thread on one page