PDA

View Full Version : Road 180 Keeping It Old School



jeff nelson sileighty
24-07-15, 22:56
Right ive been meaning to make this thread for a very long time so this is basically going to be a 3 year build crammed into the first post so bear with me
I sort of accidently picked up this shell off a fella on here about 3 years ago , i had zero intentions of buying anything when i logged on that day but somehow found myself out looking at the shell that evening, turned out to be a very good straight shell with no dents with no actual rust just bits of surface here and there from being left outside so ended up bringing it home :rolleyes:
So here we go
Got her home and threw on a bootlid i had spare from the drift car just to keep rain and shit out http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/IMAG0483_zpsgx5acb5g.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/IMAG0483_zpsgx5acb5g.jpg.html)
turned out for some reason the hinges wouldnt line up so just left it resting on it for now til i got another one
so i set about tidying the shell itself taking care of any bits and pieces that needed tidying of which there was virtually none , the underside of the car was absolutely perfect not a spec of rust anywhere so cleaned it all down and wax oiled it to make sure nothing ever would develop just for peace of mind …what a cunt of a job it was without a lift or even a decent jack, unfortunately never got any pics of it cause i was doing it on small jacks so hadnt the space to be getting pics

I went and cleaned the arches and legs , they were in very good nick but said i might as well spray them seeing as they were easily got at

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/IMAG0475_zps8530d156.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/IMAG0475_zps8530d156.jpg.html)

While she was jacked up i took off all arms and pollybushed anything that had a bushing in it

Once i had all that shit sorted i said id throw on a pair of kouki lights i had here and picked up a centre panel so that tidied up the back end nicely .

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/IMAG0495_zpse685dd6c.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/IMAG0495_zpse685dd6c.jpg.html)

I then needed to get the car off the trailer so borrowed a pair of rear hubs and picked up some almost new d2 coilovers , i dont know were they even driven on the road they were so good but fired them in so i could get her off the trailer

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/IMAG0500_zps2ac33f9c.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/IMAG0500_zps2ac33f9c.jpg.html)

Went and picked up a good shot of bits off slithertooth (rory) off here

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/IMAG0583_zpstneesyqm.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/IMAG0583_zpstneesyqm.jpg.html)
In that lot i got a pair of headlights

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/IMAG0620_zps76976e85.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/IMAG0620_zps76976e85.jpg.html)

you can see one surround had a piece gone out of it so pulled them apart and fiberglassed it up

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/IMAG0621_zpsjajdg0qo.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/IMAG0621_zpsjajdg0qo.jpg.html)
But even the good surround had loads of tiny little gouges that i circled http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/IMAG0624_zpsbc5d65a4.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/IMAG0624_zpsbc5d65a4.jpg.html)

so i filled them all up just to have them right

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/IMAG0626_zpsb3995370.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/IMAG0626_zpsb3995370.jpg.html)

even got right anal and sprayed the screws

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/IMAG0628_zps0f9213cc.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/IMAG0628_zps0f9213cc.jpg.html)

I cant seem to find pics of the end result but as i say it was 3 years ago so god only knows what phone theyd have been taken on
So next thing i picked up a pair of original steel wings which were stupidly hard got but got them anyway and sprayed them up and fitted them loosely for the mean time

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/WP_20130802_001_zpsciibdtjb.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/WP_20130802_001_zpsciibdtjb.jpg.html)

Also picked up a kouki bumper and cable tied it on to test fit it

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/WP_20130803_003_zpstqheb0wc.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/WP_20130803_003_zpstqheb0wc.jpg.html)

And put on the headlights

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/WP_20130803_005_zpsmo1wagio.jpg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/WP_20130803_005_zpsmo1wagio.jpg.html)

So with that all done it was time to get down to the proper mechanical shit
To drop in the engine i dropped the car out to a buddy who has an engine crane and a proper garage , i had wanted to do this build absolutely start to finish myself but work had me tied up 6 days a week and the thought of trying to fit a gearbox without even a good jack was just stupid so leaving it out with the buddy just made more sense , so off she went and this is how she sat

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642176935818769_zpsqt4gm1g5.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642176935818769_zpsqt4gm1g5.jpeg.html)

…………………………………………†¦â€¦â€¦â€¦â€¦â€¦.For 2 years , i dont really know what happened , myself and the buddy just both kept getting side tracked with other shit and a job that should have taken very little time just dragged on i think it came down to the fact every time we looked at it we'd find more and more awkward hard to get parts so sourcing parts did take up a huge amount of time but it was productive it ment i took the time to either get the best new parts i could or else the best condition second hand bits so got an exedy triple plate clutch , all braided turbo lines , driftworks braided brake lines etc. threw in some subframe locking collars and got all the rolling side of things finished up
So roughly 2 years later i picked her up looking fairly sorry for herself but i brought her home and gave her a good scrub

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642176932485436_zpsxe9gvy1z.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642176932485436_zpsxe9gvy1z.jpeg.html)

So with the engine and everything fitted i cracked on with the wiring …this is where shit starts to go cuntish , i HATE wiring always have for some reason so this was never going to be an easy task but cracked on with as much as i could so started working out whats what

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642176899152106_zps2fbvfiep.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642176899152106_zps2fbvfiep.jpeg.html)

Went about fitting the fuel tank , lines etc. was a bit of a weirdly awkward job trying to get the fitting straps on and the neck properly in place but got there in the end

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642176892485440_zpsm7tww4gp.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642176892485440_zpsm7tww4gp.jpeg.html)

I was and still kind of am still going full kouki type x with this bulid due to the car being a 98 shell but i got serious horn for a zenki front bumper so picked one up off darenm on here with the lights,grilles and splitter still on

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642175665818896_zpsufo5aseq.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642175665818896_zpsufo5aseq.jpeg.html)

Test fitted it , loved it even more than i expected so went and sprayed it

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642175642485565_zpsvopvssmg.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642175642485565_zpsvopvssmg.jpeg.html)

jeff nelson sileighty
24-07-15, 22:57
And fitted

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642175615818901_zpsbzb5oeeb.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642175615818901_zpsbzb5oeeb.jpeg.html)
http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642175622485567_zps5veiny5x.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642175622485567_zps5veiny5x.jpeg.html)

While i had the bumper off i just tidied up behind the bumper , i had already spreyed it properly in the past but wanted to give it a fresh coat of white just to be anal (as always) about it

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642175672485562_zpsv7r6eilr.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642175672485562_zpsv7r6eilr.jpeg.html)

I also sorted pretty much a full interior , searched the length and breadth of the country to find perfect origional kouki seats which im delighted to have got , have a good dash and pretty much everything else bar a few small bits

Everythings been kinda put on hold at the minute cause theres been a shitload of break-ins all around me over the past while , cars being robbed , parts stolen and all that shit even herselfs car was done so money has been poured into security in everything i own , all the cars are now packed with security , ive the wiring in this set up enough to have a serious alarm working in it so its absolutely 150% safe along with equally good systems in the other cars and cctv around the place but ontop of all that is the baseball bats and hammers that now await any little shit that gets near the place … only reason im saying this is im lucky enough to live in a part of town that would have never been any hassle and you never had to worry bout this shit up until now so all im saying is dont take the security of your stuff for granted make sure you have everything sorted its not worth the heartache of someone fucking with your pride and joy


.So thats basically how she sits now just need to finish out the fucking cunting dickhead wiring :mad:
but for now heres some random pictures i had taken over the past while

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642175602485569_zpsuhhytfby.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642175602485569_zpsuhhytfby.jpeg.html)

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642176832485446_zpsjfwsy5f6.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642176832485446_zpsjfwsy5f6.jpeg.html)

http://i1108.photobucket.com/albums/h403/jnelson19/road%20180/received_642176925818770_zpshn1yvbcq.jpeg (http://s1108.photobucket.com/user/jnelson19/media/road%20180/received_642176925818770_zpshn1yvbcq.jpeg.html)

LarZ
24-07-15, 23:07
Deadly man! I've a lot of interior bits. Let me know what you need and I'll try sort you out.

jeff nelson sileighty
24-07-15, 23:33
Deadly man! I've a lot of interior bits. Let me know what you need and I'll try sort you out.

Savage job man I'll let you know when I check what I need , ill have to go through what I have here first thanks

drift student
26-07-15, 15:58
Couldn't remember who I sold that spoiler too!!

batman026
26-07-15, 16:29
Loving the old school look. I'm keeping my ps13 the same. Great work

jeff nelson sileighty
26-07-15, 23:07
Loving the old school look. I'm keeping my ps13 the same. Great work
Ya it just suits 13s I think , 15s and 16s with standard body just look right ...I've seen your ps too the wheels suit it bang on


Couldn't remember who I sold that spoiler too!!

Haha ya that's going back a long time , still have the bumper I got off you too

dan the man
27-07-15, 23:11
Nice build mate, would love to get my hands on a 180. looks like you have my old 14 judging by the sticker on the back bumper, is it for sale? 4881

jeff nelson sileighty
28-07-15, 00:19
Nice build mate, would love to get my hands on a 180. looks like you have my old 14 judging by the sticker on the back bumper, is it for sale? 4881

That's awesome yup it's your old 14 , everything's for sale at the right price but ive done a lot to it since I got it , has a good spec list now ....feel free to pm me about it or fire me a message on fb
I never intended on buying it but somehow did and and love it , it's a very good 14

dan the man
28-07-15, 09:25
I actually still have the badges off that. Yeah it was a good solid car when I sold it anyway, il pm you on fb about it

batman026
28-07-15, 16:48
[QUOTE=jeff nelson sileighty;520606]Ya it just suits 13s I think , 15s and 16s with standard body just look right ...I've seen your ps too the wheels suit it bang on

cheers man appreciate it

jeff nelson sileighty
02-11-15, 09:09
Right time for a long overdue update
With work and the other cars I haven't had much time to be at this so it's basically Sat as ye saw in the last post
http://i1108.photobucket.com/albums/h403/jnelson19/Mobile%20Uploads/IMAG0085_zps3r5zyrrb.jpg (http://s1108.photobucket.com/user/jnelson19/media/Mobile%20Uploads/IMAG0085_zps3r5zyrrb.jpg.html)

but it's now off for a full respray because it's now or never , if I got the car on the road I'd have never taken it off to go spraying it so said I might as well take advantage of it
I spent a while deciding who I wanted to do the job cause I wanted this to be better than when it left Nissan , so I chose a local fella called mikey Walsh to do it after seeing some of his previous work , gave him a shout he called over looked at the car and said bring it out to his shed so I could strip it which was dead on of him
So got it out and started stripping
http://i1108.photobucket.com/albums/h403/jnelson19/Mobile%20Uploads/IMAG0540_zpsoz6wa7hr.jpg (http://s1108.photobucket.com/user/jnelson19/media/Mobile%20Uploads/IMAG0540_zpsoz6wa7hr.jpg.html)
This is going to be an absolutely bare shell respray outside , inside and underneath so glass and all will be coming out
So pulled the engine and box out
http://i1108.photobucket.com/albums/h403/jnelson19/Mobile%20Uploads/IMAG0545_zpsjnhjyyhz.jpg (http://s1108.photobucket.com/user/jnelson19/media/Mobile%20Uploads/IMAG0545_zpsjnhjyyhz.jpg.html)
But this job also ment I had to pull all the wax oil off which is just painful but it's getting there

http://i1108.photobucket.com/albums/h403/jnelson19/Mobile%20Uploads/IMAG0594_zpsqhxlvhs0.jpg (http://s1108.photobucket.com/user/jnelson19/media/Mobile%20Uploads/IMAG0594_zpsqhxlvhs0.jpg.html)

Pulled everything off underneath and was happy enough with how clean it is behind the subframe

http://i1108.photobucket.com/albums/h403/jnelson19/Mobile%20Uploads/IMAG0598_zpsfarf5xpz.jpg (http://s1108.photobucket.com/user/jnelson19/media/Mobile%20Uploads/IMAG0598_zpsfarf5xpz.jpg.html)
So the last day or two has just been all the fiddly bits like taking off brake and fuel lines , removing wax oil etc so its taking a bit of time but it's getting there
I'm also after buying a set of 16x7 &16x8 panasports that should look absolutely perfect under it
I'm also contemplating rebuilding the engine while it's out just a freshen up , it doesn't need it but at the same time I'd prefer it done just so I know it's good enough that it won't be coming back out
I think that's it for now

LarZ
02-11-15, 10:10
nice. serious job!

derek89
02-11-15, 13:05
Ye serious job so far dude. Ye the panasports will look good on it. U have a colour yet??

jeff nelson sileighty
02-11-15, 16:00
nice. serious job!
Sound asshooooole, well have to get a few pics of this and yours , might even get in a Dave Daly pose

Ye serious job so far dude. Ye the panasports will look good on it. U have a colour yet??
Ya I think they will but I also have ssr meshes and hartge Japan's so I can change it up a bit of I feel like it
It'll be staying the original white I just want to keep it 90s

LarZ
02-11-15, 16:28
stick to the meshes we be like yin and yang...