Right ive been meaning to make this thread for a very long time so this is basically going to be a 3 year build crammed into the first post so bear with me
I sort of accidently picked up this shell off a fella on here about 3 years ago , i had zero intentions of buying anything when i logged on that day but somehow found myself out looking at the shell that evening, turned out to be a very good straight shell with no dents with no actual rust just bits of surface here and there from being left outside so ended up bringing it home
So here we go
Got her home and threw on a bootlid i had spare from the drift car just to keep rain and shit out
turned out for some reason the hinges wouldnt line up so just left it resting on it for now til i got another one
so i set about tidying the shell itself taking care of any bits and pieces that needed tidying of which there was virtually none , the underside of the car was absolutely perfect not a spec of rust anywhere so cleaned it all down and wax oiled it to make sure nothing ever would develop just for peace of mind …what a cunt of a job it was without a lift or even a decent jack, unfortunately never got any pics of it cause i was doing it on small jacks so hadnt the space to be getting pics
I went and cleaned the arches and legs , they were in very good nick but said i might as well spray them seeing as they were easily got at
While she was jacked up i took off all arms and pollybushed anything that had a bushing in it
Once i had all that shit sorted i said id throw on a pair of kouki lights i had here and picked up a centre panel so that tidied up the back end nicely .
I then needed to get the car off the trailer so borrowed a pair of rear hubs and picked up some almost new d2 coilovers , i dont know were they even driven on the road they were so good but fired them in so i could get her off the trailer
Went and picked up a good shot of bits off slithertooth (rory) off here
In that lot i got a pair of headlights
you can see one surround had a piece gone out of it so pulled them apart and fiberglassed it up
But even the good surround had loads of tiny little gouges that i circled
so i filled them all up just to have them right
even got right anal and sprayed the screws
I cant seem to find pics of the end result but as i say it was 3 years ago so god only knows what phone theyd have been taken on
So next thing i picked up a pair of original steel wings which were stupidly hard got but got them anyway and sprayed them up and fitted them loosely for the mean time
Also picked up a kouki bumper and cable tied it on to test fit it
And put on the headlights
So with that all done it was time to get down to the proper mechanical shit
To drop in the engine i dropped the car out to a buddy who has an engine crane and a proper garage , i had wanted to do this build absolutely start to finish myself but work had me tied up 6 days a week and the thought of trying to fit a gearbox without even a good jack was just stupid so leaving it out with the buddy just made more sense , so off she went and this is how she sat
…………………………………………†¦â€¦â€¦â€¦â€¦â€¦.For 2 years , i dont really know what happened , myself and the buddy just both kept getting side tracked with other shit and a job that should have taken very little time just dragged on i think it came down to the fact every time we looked at it we'd find more and more awkward hard to get parts so sourcing parts did take up a huge amount of time but it was productive it ment i took the time to either get the best new parts i could or else the best condition second hand bits so got an exedy triple plate clutch , all braided turbo lines , driftworks braided brake lines etc. threw in some subframe locking collars and got all the rolling side of things finished up
So roughly 2 years later i picked her up looking fairly sorry for herself but i brought her home and gave her a good scrub
So with the engine and everything fitted i cracked on with the wiring …this is where shit starts to go cuntish , i HATE wiring always have for some reason so this was never going to be an easy task but cracked on with as much as i could so started working out whats what
Went about fitting the fuel tank , lines etc. was a bit of a weirdly awkward job trying to get the fitting straps on and the neck properly in place but got there in the end
I was and still kind of am still going full kouki type x with this bulid due to the car being a 98 shell but i got serious horn for a zenki front bumper so picked one up off darenm on here with the lights,grilles and splitter still on
Test fitted it , loved it even more than i expected so went and sprayed it
![]()


























Reply With Quote







