Ali-d1936's S15 Spec-R [Archive]

ali-d1936

22-02-11, 01:04

well lads iv been riding around in this little jem the last few months and said id stick up some pictures of it :P never planned on doing anything to it as i thought it was perfect,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0016.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0151.jpg

ha but i cant leave things alone, only things i didnt like when i bought it was the front bumper with the filled in grill area, and uras rear bumper, so sorced some replacements and now it sits like this.

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0148.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0153.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0155.jpg

ah iv more pictures but photobucket is acting up ill try them again tomorrow!!

so iv a LIL problem i collect seats LOL

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0186.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0193.jpg

so seeing as i cant find any rails to suit all the seats im fabing up my own rails that will work with all of them :P

(ill stick up pics of me building the rails again photobucket acting gay)

plans are

finish fabing seat rails, new coilovers, sort out the brakes, d-max style rear lights, might remove rear windscreen wiper, maybe a nice tail and roof spoiler but i think it might look better without?!
then hopefuly summore POWWWWERRRR! :cool:

joey banana s14

22-02-11, 01:09

looks familiar,,, very clean car lad probably cleaner than you realise well ware with it:D

si_berry

22-02-11, 11:19

Would you part with two of the Brides? Do you have the rails for these?

Simon

22-02-11, 12:56

Loooolely car. but to clean to drift??????????

Thats alot of seats haha do you have one for each day a the week?

jake4

22-02-11, 13:09

nice 15 lad.

Scamper

22-02-11, 13:20

car is mint, liked the first bumper better tho, and the red bride brix is mint!

sideways shane

22-02-11, 15:46

nice 15 man,be ready for the flood of posts with people looking seats:D:D

clifford106447

22-02-11, 15:55

sell me ur d2 harnesses lol

sparky

22-02-11, 16:09

Loooolely car. but to clean to drift??????????

No car is to clean to drift, look at Ste on here cleanest car in the country probably and still put to good use

Very nice S15 tho

Hakosuka

22-02-11, 16:13

S15 is awesome dude.

NoelB

22-02-11, 16:34

Evans old 15 ya?? Lovely car in fairness

hunty_sideways

22-02-11, 22:38

Evans old 15 ya?? Lovely car in fairness

My old art piece surely :)never too clean to drift ha ha ha you have a collection of seats I'd a collection off bumpers ha ha

S14a johno

22-02-11, 22:48

No car is to clean to drift, look at Ste on here cleanest car in the country probably and still put to good use

Very nice S15 tho

x2 agree there sure mine same and i go drifitng in her

but seen it a japfest, and a mondello practice day too
i tink :confused::confused::confused:

hunty_sideways

22-02-11, 22:54

x2 agree there sure mine same and i go drifitng in her

but seen it a japfest, and a mondello practice day too
i tink :confused::confused::confused:

Not this car lad prob Francis o shea's your thinking off ;)

pgeraghty

23-02-11, 22:16

class 15,,must get a spin sumnite ur in westport:D

bart

23-02-11, 22:30

haha.. no its not to clean.. ive pics of her with rear 1/4 panel end........

hunty_sideways

23-02-11, 22:33

haha.. no its not to clean.. ive pics of her with rear 1/4 panel end........

No dude tat was your car the 1st trip out in mondello remember when ya hit the tyre wall ?:p

Stevo

23-02-11, 22:35

haha.. no its not to clean.. ive pics of her with rear 1/4 panel end........

Nothin a bita filler didnt sort :eek:

Sorry for the off topic, nice car lad :)

ae86....

23-02-11, 22:37

lovely car dude...!:)

bart

23-02-11, 22:55

No dude tat was your car the 1st trip out in mondello remember when ya hit the tyre wall ?:p

yea exactly... hit tire wall in your car..
so result in rear 1/4 panel damage..
ya drunk or just bang your head again????

hunty_sideways

23-02-11, 22:58

yea exactly... hit tire wall in your car..
so result in rear 1/4 panel damage..
ya drunk or just bang your head again????

Stop talkin poo on the lads thread you were never capable off driving a proper car ooooohhhhhhhhh :p

bart

23-02-11, 23:04

Stop talkin poo on the lads thread you were never capable off driving a proper car ooooohhhhhhhhh :p

will ya stop talking dung..
after all you were the one that rang me and wanted to swap a DIESEL A4 for "YOUR VERY CLEAN s15" :p:p
MOVING ON NOW BABY FACE.. I'LL LEAVE IT AT THAT;)

NICE CAR LAD

hunty_sideways

23-02-11, 23:09

will ya stop talking dung..
after all you were the one that rang me and wanted to swap a clocked DIESEL A4 that's fallin apart for "YOUR Gorgeous most beautiful and CLEAN S15 " :p:p
.. I'LL LEAVE MY BULLSHIT AT THAT;)

NICE CAR LAD

Bahahahahaha :D

ali-d1936

08-03-11, 19:35

Ah recognise the name from Honda Haven, remember your old EJ9, was feckin' savage!
QUOTE]

Cheers lad miss that car so much!!
http://i136.photobucket.com/albums/q171/ali-d1936/P300410_1747.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/P300410_163904.jpg

had to break it in the end but made way more than i did trying to sell it all together!

[QUOTE=pgeraghty;247278]class 15,,must get a spin sumnite ur in westport:D

haha ya sound dude, you can make me a offer on it too while you are at it :P

ali-d1936

01-08-11, 15:11

washed the car today so took a few pictures before i park it up for the year :(

tomorrow im removing the coilovers giving it another coat of underseal hopefuly find a set of cheap wheels to throw on it aswell!

http://img52.imageshack.us/img52/5810/dsc00578sj.jpg
http://img819.imageshack.us/img819/9462/dsc00577eq.jpg
http://img703.imageshack.us/img703/4914/dsc00576w.jpg
http://img651.imageshack.us/img651/487/dsc00563pr.jpg
http://img833.imageshack.us/img833/3161/dsc00554li.jpg
http://img706.imageshack.us/img706/9757/dsc00575xv.jpg
http://img200.imageshack.us/img200/2711/dsc00571gx.jpg

few weeks ago
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00529.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00539.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00527.jpg

Took out my brides as these DC2 Recaros are the most comfortable seats iv ever had :)
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00492.jpg

the wheels after a polish and painting the calipers Fluoresent yellow :)
http://img535.imageshack.us/img535/6986/dsc00573gk.jpg
http://img856.imageshack.us/img856/9537/dsc00583j.jpg

Marcin1991

01-08-11, 15:13

Oh sex on wheels ehhe;) nice one

ali-d1936

25-08-11, 19:54

Bit of a sad update now but heading of to OZ tomorrow :) so undersealed it again, swapped out the coilovers, took off the Veilsides, and thanks to juice for the replacement wheels, and gave it a good waxing so parked up now nice and dry and secure :)

Pics arnt working for some reason buy you get the idea.

ali-d1936

01-09-12, 21:16

So after a long year away Down under :afro: i decided to come home for a few weeks, thankfully i bribed my younger brother with packets of haribo to start it up once a month and give it the odd wash, so was in good condition when i pulled it out.

after pulling it out of the Shed from her dry storage. ;)

so as it is im going back in 3 weeks, its out of test for 10 months and no tax for a year, Its nearly not worth ncting it for the few weeks but i really want to give it a blast, so every spare chance i get im going to get it ready to throw it through the test and see how it goes,

so ripped of the bumpers and with the grinder and wire brush attachment brushed back all the surface rust, etch primed it and gave it a further 2 coats of under seal on basically everywhere but the body pannels so it will be nice and safe parked up again,
Before:
http://img846.imageshack.us/img846/9383/imag0950l.jpg
After:
http://img196.imageshack.us/img196/870/imag0952t.jpg

The Veilsides where looking fairly poor, so decided to polish up the lips to a mirror finish :)
Before:
http://img802.imageshack.us/img802/6668/imag0946a.jpg

Took out all the Studs, and started with 320 grit and worked up to 2500 grit wet and dry sand paper, then gave it a lashing of metal polish.

http://img805.imageshack.us/img805/3985/imag0962.jpg

Finished result, came out pritty well but its hard to tell with the rubbish camera pics,
http://img18.imageshack.us/img18/1865/imag0964.jpg

the studs had some ammount of white scum on them comming out and i was told to leave them in Coke for 24hr and it will clean them up... i guess time will tell LOL
http://img443.imageshack.us/img443/9192/imag0965e.jpg

and a throw back of how it was before i left cant wait to get it back up like this again :)
http://img594.imageshack.us/img594/33

whipped out the coilovers, seem to have lost my coilover spanner so i thought it was going to be a nightmare to adjust them, thankfully i fully copper greased them before i left, and they wound up and down free hand with no need for a spanner :)

bit pissed ATM, had a vertex lang front bumper ordered from a guy in england but that seems to have fallen through as he dosnt make them anymore, i have a vvt sprocket and Yashio factory rear lights ordered months ago off ebay neither of them have been delievered yet :mad:

so hopeing to book a test next week chuck back on all the goodies and enjoy it for the few weeks im back :cool:

peterhouze

01-09-12, 21:27

might be just me but most of the pics arnt working in your last post
jesus i forgot about this yoke

peterhouze

01-09-12, 21:29

ah never mind there working for me now

broad.sideways

02-09-12, 12:42

lovely car lad and very nice seat collection

rmc

03-09-12, 21:03

Super cool!!! The wheels just make it!!!

ali-d1936

09-09-12, 20:48

cheers lads,

truth be told i wasnt fully happy with how the wheels came out, the lips came out ok, but the face on the spokes where still all dull, i considered getting bronze paint and spraying the face and lip flat bronze (still undeceided on this i think it will look good), but decided agienst it, got another pack of 2500 grit paper, and spent 2 hours on each wheel doing every inch of them,

http://img337.imageshack.us/img337/4889/imag0968j.jpg
http://img18.imageshack.us/img18/1056/imag0971d.jpg
http://img717.imageshack.us/img717/327/imag0969y.jpg
http://img822.imageshack.us/img822/621/imag0970g.jpg

:afro: now thats better

so i have a high metallic silver spray paint that ill finish the center where the nut bolts are and between the spokes and it finished.

then that will still be 2 down 2 to go :)

PeterT

19-09-12, 18:03

horse them on for a look there horse!

paddyb01

19-09-12, 18:36

Cool lookin car,
any intrest in swaping wheels

D.r

20-09-12, 07:27

Great job on the car and the wheels.
Looks spot on.

Billy_P

20-09-12, 13:59

Nice s15 dude!!
Wheels came out well!!!

ali-d1936

20-09-12, 21:25

Cheers guys,

have the car all ready for the NCT, exhaust off, standerd shocks in lights and wheels aligned... and now im thinking its a waste of time, pay tax for 3 months, do the test (and it will only get tested for a few months), and insurance company's still want a arm and a leg to insure it even for just 2 months as i will be gone again and it will just be parked up again for another 12months.

so a few ill updates, as i plan on getting a s14 in the coming week for a project car iv been stockpiling parts for it,
so i bought a yashio factory s14 knob and gaitor, loved it so much i was hopeing it would sit on the s15, bud sadly the threads are different non the less looks sweet and will look good in a s14 :o

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0973_zpse30259cd.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0984_zps6452eb33.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0983_zps56e2a52a.jpg

Next ordered some Yashio Factory stsmokedLED lights

http://i136.photobucket.com/albums/q171/ali-d1936/Untitled_zpsa1733a58.jpg
Lights on
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG0995_zps08947594.jpg

TBH im still undecided on them... old or new? or might get another set unsmoked??

http://i136.photobucket.com/albums/q171/ali-d1936/Untitled_zpsd985d4c8.jpg

Opinions?

so then wheels i really want something with more dish, and give the arches a lil roll. missed out on a perfect set of meisters in england twice :mad:

or another option is to buy 4 new Dish Barrels for the Veilside Wheels but i dont know where to go looking to get this done?

So if nothing creeps up in the next few weeks ill be going another route,

18x10 et0 varrasteons white or royal bronze.

http://allthingsproper.files.wordpress.com/2011/02/5465980823_d785bea031_b.jpg

epic looking but not keen on them side on.

http://farm7.static.flickr.com/6056/6336673476_dcfa9d8432_o.jpg

or some humble Rota Torques 18x9.5 +20

http://dudesphotography.smugmug.com/photos/636932784_cgnrV-XL.jpg

SO for now, im waiting for a heap of stuff in the post, mirrors, 2 front bumpers ;) spoiler, and alot of interior bits,

id check back for the next update.. the 2 front bumper thing should get a bit interesting ;)

galway joey

20-09-12, 21:51

Must say your doing a great job with this mate....

For me i like the old lights better and the varrasteons are crazy cool, get them:).....

hunty_sideways

21-09-12, 04:34

I want whatever lights you don't want :) matter off interest where did ya pick up the smoked led ones ? But she is starting to come on nicely, deffo not torques though and et12 with a 5mm spacer is niceeee :)

dil

21-09-12, 08:38

love those yashio gear knobs, been meaning to get one on rhd! defo would keep the veilsides over torques anyway!!!

ali-d1936

26-09-12, 16:27

So a little Dilemma.. i purchased This gen bride material because i was going to re-trim the centres on my lowmax's as the graduation was wearing off on me... its a little busy if you get me, but now when im weighing them up the graduation is growing on me again... i can get graduation material also, what do people reckon?

stay graduation? or go for the Black centers...
the seats. as they are with the Graduation Material
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1025.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1027.jpg

Bride Black Material
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1016.jpg

horrible picture but you get the idea.
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1024.jpg

this is what it should look like :)
http://images53.fotki.com/v1574/photos/8/899247/6763868/060-vi.jpg
http://images50.fotki.com/v399/photos/8/899247/6763868/059-vi.jpg

if i go for the black, i will be retriming

~the Fabric on the door cards
~Lowmax seat cushions
~then fabric dye the rear seats black, and retrim the centers of the back seats with the Bride materaial also.

but it is a tough one, Graduation material or black material :/ i need opions on this one... :huh:

paddyb01

26-09-12, 16:39

Id go black would look way cleaner

ali-d1936

26-09-12, 17:03

Id go black would look way cleaner

I think your right, have my cousin to retrim them so will be nice and cheap too :)

also confirmation i have these on the way 3.5 inch lips :P should look good on the FRONTS! :wink:

http://imageshack.us/a/img441/9059/005cnq.jpg

a extra 1.5 inches so im hoping 30mm overs and camber with a nice strech will look mint :)

and nearly have the Rears sorted also
4.5's :P

doug

26-09-12, 21:22

how do you get the new barrels? cost much? ive a set of equips i wouldnt mind getting moredish on

ali-d1936

27-09-12, 16:02

how do you get the new barrels? cost much? ive a set of equips i wouldnt mind getting moredish on
Struck gold and found a guy who was stripping his wheels and replacing them by putting on 6" lips so gave me these :)

best i found was a company in germany who make barrels,
Two 3.5" lips delivered to Ireland is working out at E470. :eek:

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1031.jpg

:afro:
will go back over it again as there are a few rough places where i missed with the higher grades. but TBH it beats paying E500 for second hand scratched lights ;)

now onto the interior :)

grange

27-09-12, 16:20

fuckn hell the amount of times i used thinners and that never happend! strange wan

rob_180sx

27-09-12, 16:35

same happened me before on an integra with the cracks in the lamps, the joys of plastic headlights!

nice job bringing them back though! took alot of sanding and patience i imagine!

ali-d1936

28-09-12, 15:46

To say it was a stomach wrenching moment when it happened would be a understatement,those s15 lights aint cheap, found out it was N20 thinners, think its different to regular thinners

so started today at the door cards,

First take one s15 door card (pool table optional)

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1034.jpg

Carefully ripped off the fabric,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1035.jpg

spend hours rubbing off every last piece of foam so the adhesive has something solid to stick to. and mask off the edge.

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1036.jpg

apply the adhesive to both the door and the fabric.

as soon as they touch that's it so you better have it lined up right the first time.

then carfully trim the extra off

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1037.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1038.jpg

one down one to go,

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1040.jpg

:afro:

has anyone ever used fabric dye before? looking into it for the back seats but cant find anything,

i want something proper that wont rub off onto peoples clothes,

ali-d1936

28-09-12, 22:57

my old gear gaitor looked like a dog got at it at some stage, was torn allover, so with with the leftovers of the doorcards i thought id try and muster something up,

looks like i would just have enough :cool:

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1041.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1042.jpg

Didnt take long, but i put alot of effort into it and it paid off, red stiched to match the seats and wheel, its not just bride material sown up in a cone shape like iv seen other people do ;)

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1043.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1045.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1044.jpg

nikkisixx69

28-09-12, 23:08

looks good! what ya doin with the yashio factory one?? pm me if ya wanna sell :)

ali-d1936

28-09-12, 23:22

looks good! what ya doin with the yashio factory one?? pm me if ya wanna sell :)

haha, im still looking to get a s14 so im buying parts for that too and that is defiantly going into it. but if i change my mind ill let ya know ;)

ali-d1936

29-09-12, 18:43

Sorted the loom in the drivers wheel well Today, was always cautious of it, so i always had that extra 2 inches i could have gone lower but didn't for fear of chewing it up, so i said id tie it up so i wouldn't have to worry about it again,
this is what it looked like it was actually resting on the plastic shield,

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1049.jpg

got to it just in time :cool:
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1050.jpg

pulled it out as much as i could to see what i had to play with
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1051.jpg

cut a notch out so the loom would run along the lip
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1052.jpg

then treated and fiberglassed around the cut metal so it was in no danger of sharp edges cutting into the loom,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1053.jpg

undersealed everything while i was at it
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1054.jpg

and tied it up with the largest zip tyes i could find :p
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1055.jpg

thats how it should have been done from the factory Nissan :)

where i had cut the notch sits nice :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1056.jpg

had to run the bonnet cable under the lip as there wasnt enough slack to bring it over,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1057.jpg

throwing on the wing i found out i had over done it :mad: the wing wouldn't go back on ... so had to adjust the loom again until it would stop fowling the wing,

still its out of harms way so i gained a good bit of extra clearance.
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1059.jpg

ali-d1936

01-10-12, 19:49

Dropped the seats in to be retrimmed in the new Bride material Today so ill be waiting 2 weeks :p

then my new lips arrived this morning :o
wasted no time stripping two old wheels and sticking them on :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1071.jpg

turns out my old wheels where 18x9 not 18x9.5 so overall width are 18x10.5 now not too crazy up front ;)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1072.jpg

old vs new
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1073.jpg

test fit :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1075.jpg

going to be looking for 5" or 5.5" inner barrels so ill be able to run more camber if needs be
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1079.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1083.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1076.jpg

have 30mm front overs ordered but i think ill be putting them up for sale as soon as they arrive as i will unfortunately be needing 50 mm,

was hoping to stay with only 30mm overs front and rear as i dont like the look of the 50mm overs they bulge too much and ruin the whole look of the car,

so over the next few days im going to have to decide to stick with the plan and run with the comming 4" lips for the rear, or put these on the rears and just run 3" lips up front, and squeeze them under 30mm's

anyone interested in 4" lips if i decide to do that? let me know

ali-d1936

04-10-12, 22:42

First off got Genuine Ganador Mirrors :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1089.jpg
spryed them up and stuck them on :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1090.jpg
Delighted with them,

then Coulour choice on the wheels where wrecking my head, was going to go with gold or Bronze centers, but thinking that they may cheapen the look of the car i played it safe and went silver,

first dark silver
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1106.jpg

but was unhappy so back to halfords again for another shade of silver

and shating,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1137.jpg
very happy :)

then polished my bolts, left them on coke for 2 days,
broke down alot of gunk off them,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1135.jpg

then wire brushed them,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1134.jpg

then polished the Feckers right up
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1136.jpg

4 hours for 80 bolts :/

so puting these two back together tomorrow and onto the next two, i will be happy to see the back of these wheels, pain in the ass :)

rico180

05-10-12, 11:09

NoelB

05-10-12, 11:33

You have a lot more patience than me my friend!! Craicing job on this though

Damien

05-10-12, 11:37

ali-d1936

06-10-12, 11:32

What do you mean you left the bolts in coke? Like coca cola?? Might sound stupid , but I'm just wondering .

Yea, Coca Cola I'd say, if you ever saw a tooth left in it for a day you'd see how good it is at dissolving stuff.

Car is coming along well, I'm sure the wheels will be worth all the work in the end.

Yes Coca Cola, broke down the Locktight on the threads and everything dose a great job iv herd people using Vineger aswell so when i split the other two wheels ill leave them sitting in Vinegar for a few days and see if its anybetter than coke.

You have a lot more patience than me my friend!! Craicing job on this though

Ha just have alot of free time i cant work ATM in and out of hospital so when ever im bored i just go outside and crack on with this for a few hours :)

rico180

06-10-12, 12:05

Yes Coca Cola, broke down the Locktight on the threads and everything dose a great job iv herd people using Vineger aswell so when i split the other two wheels ill leave them sitting in Vinegar for a few days and see if its anybetter than coke.

Ha just have alot of free time i cant work ATM in and out of hospital so when ever im bored i just go outside and crack on with this for a few hours :)

Ya learn something every day!😃😃

ali-d1936

06-10-12, 18:47

Ya learn something every day!😃😃

I have the other 40 bolts sitting in vinegar now so you will know whats better in a couple days ;)

ali-d1936

11-10-12, 20:25

Well i can say that coke is heaps better than vinegar, seemed to have a much harder time cleaning the bolts after the vinegar than the coke,

so got some bushed fully adjusttable arms :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1171.jpg

and theyll see me rolling and they will be hating ;)

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1174.jpg

even tho i will 100% be using rear over-fenders, i still want to leave the arches in good nick that if i ever decide to take them off i can go back and run with a rolled arch :) so hoping i can get the arches looking like this and leaving it tight to 30mm overs,

http://i877.photobucket.com/albums/ab340/James106/IMG_3468.jpg

i wont be able to get the turn down in the flare, but ill leave it in a way that i will be able to later on if i want.

also loved the shape of the vents on the Wings i bought, so incase i cant find wings with similar vents i made a quick FGR copy ;)

rub some tin foil on the wing

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1162.jpg

start laying some fibreglass onto the foil

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1163.jpg

couple of layers to give it some strength

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1164.jpg

the let it set and pull it off :)

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1165-1.jpg

its rough so if i need it ill obvyousley build up the layers, slap on some filler and smoth her up :)

might not use or need it but its practise incase i ever need to do something similar:P

ali-d1936

12-10-12, 22:55

Just sorted these out about 5 min ago :)

http://i80.photobucket.com/albums/j174/jesnutz/40holeworklips18x3020.jpg

3" Lips, meaning i have chickened out putting the 10.5 up front and have decided to promote them to the rears, :ghey:

running the 3" up front means i have the little extra bit of comfort and hopefuly ill get the +30mm Front Wings i like and they will fit snug under them :)

Just bought them in the states so hopefuly Next week they will be here :)
also bought a D-max boot lid spoiler aswell :)should be here next week also :) haven't quite decided if i shall fit it or not, but its nice to have if i get the Urge ;)

and I got news my other set of wheels Have finnaly arrive from Japan :) so paid the Balance and getting them posted up Monday, sadly not for the s15, planning on getting a s14a in the next few weeks and they will look awesome on it, Same as what i have already Veilside's 18x11 -30, 18x10 -18
:notworthy:notworthy:smitten:

Cant wait to get stuck into them :P
https://bay002.mail.live.com/att/GetInline.aspx?messageid=2110066e-a833-11e1-a556-00237de3fb08&attindex=0&cp=-1&attdepth=0&imgsrc=cid%3aimage001.jpg%4001CD3C48.47DDC300&cid=753265b3e364174c&blob=MHxpbWFnZTAwMS5qcGd8aW1hZ2UvanBlZw_3d_3d&hm__login=alandrury&hm__domain=live.co.uk&ip=10.43.28.8&d=d234&mf=0&hm__ts=Fri%2c%2012%20Oct%202012%2022%3a31%3a14%20G MT&st=alandrury%25live.co.uk%407&hm__ha=01_fddea834df00953f57e4fde2ae376a1789681b21 cadcaced196b57bb61cea619&oneredir=1

grange

12-10-12, 23:29

the pic of your 11j -34 isnt working for me =[

nikkisixx69

12-10-12, 23:38

to get the rear arches that flared you will need filler!! as you will kink the quarter and crack the paint with that much of a pull!

i wanna see the new wheels for the s14 !!!!!

martycturbo

13-10-12, 19:10

great work!! will be keeping an eye on this:)

BaileyR32

14-10-12, 09:47

beautiful car lad, love the wheels..

POC

14-10-12, 13:04

ali-d1936

14-10-12, 19:29

You wasted your time cleaning them bolts!
I had the same problem as you and cleaned a few bolts but was unhappy so ordered new ones, the ones I cleaned were as bad a few weeks later.

Maybe try a clear paint on the bolts to protect them

hmm, i have metal polish on them, i thought a quick wipe with a cloth with some on it once a month will keep them in shape, seen alot of info on Wheel-whores that that will be enough but if thats the case i could probably order some now before i put them all back together?

POC

17-10-12, 21:12

I was in the same boat as yourself, cleaned them with Coke then Jizzer then started with a wire brush! Done a few to see how they would out but was got talking to a lad who refurbs wheels and told me I was wasting my time unless I painted them after....
I had 30 bolts per wheel and 6 wheels so wasn't to keen on cleaning them anyway!

Took a pic the last day for ya
(New one, Cleaned and wire brushed old one, old one)

http://i208.photobucket.com/albums/bb298/PATJOE3355/51F592C9-C0D2-42AD-9F09-9AF3B7EF998A-9185-000005E672040719.jpg

ali-d1936

17-10-12, 21:22

Humm cheers for that man, i got impatient on deciding what to do so i bolted them up today, if they come through like that in a few weeks again ill be a bit gutted, are yours steel and chrome dipped?

D-turbo-lad

17-10-12, 21:26

if you bolted them up we want photos ...........

ali-d1936

17-10-12, 22:14

just bolted them together gav, not on the Car yet if that's what ya mean :wink:
Didnt take alot of photos through the process because it was a mad dash but
Masked up either side of the Vally so ill get a nice straight finish,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1207.jpg

then Flat to the mat laying beads of silicone torquing up bolts, laying another bead to fill the vally, get rid of all the Air pockets in the silicone before it cures, then rip off the masking tape and you get this,
have them inside nice and warm while the Silicone sets,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1213.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1211.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1212.jpg

befor i did that i Was wondering what the offsets where so finally figured out how to measure them and came up with this,

11" overall edge to edge,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1197.jpg

150 From one edge to Hub face,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1198.jpg

150 From center face to the outer edge,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1200.jpg

Bead to bead 10.5, 150-150 = 0

So that works out at a nice 18x10.5 et0

worked out when my 3" lips arrive the fronts will be 18x10 et6
as borris johnson said Very Niceeeee,

Kruizer

18-10-12, 07:08

If you want that flare you will need to cut the inner tub and roll the inside of the quarter out with lots of heat, then weld a plate back in, sounds drastic but it works.

ali-d1936

21-10-12, 20:55

So passed the NCT and only got 4 F***ING months Test, W@nkers!!
so came home and Put on the adjustable arms and coilovers and went to change
the Exhaust,
then decided i couldnt wait any longer and went at flaring the arches
Part of me wanted to cut the inside of the arch and weld it back after, but i couldn't be arsed doing that TBH as i am going with over-fenders anyway the look of the flare wont matter,

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1233.jpg
Heated the paint up and after about a hour it still seems like it just wasnt going to Flare.
so decided to kick it up a notch and got abusive with it and it finally started to come
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1234.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1237.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1238.jpg

kept going until it looked like the Wing was going to cave in,
then mounted the wheel up to see if i got the 30mm

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1242.jpg :afro:

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1244.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1245.jpg

not finished need to come further down the wing but gave up for tonight.

Bit of paint flaked but i expected that and its not smooth all the way but im happy with it :)

that is with the Adjustible arms set to the same legnth as the original arms so once the tyre is on the wheel ill dial the arms into place and fingures crossed the tyre tucks the flare,

D-turbo-lad

21-10-12, 21:01

comming on wel nw . archs look very wel. get tyre's on . seen ya goin up by topaz friday eve looked super on standard wheels haha.

ali-d1936

21-10-12, 21:22

comming on wel nw . archs look very wel. get tyre's on . seen ya goin up by topaz friday eve looked super on standard wheels haha.

Cheres man, tell me about it bitches be dropping there panties for the oldschool 16" alloys haha. sorry didnt see you, you defiantly where not in your yoke anyhow where you? getting tyres tomorrow or Tuesday fitted by that lad across from into the west on the way to frenchpark, forget his name, he has a bead blaster as i got him to fit the tyres for my golf before and that was some headache LOL

paddyb01

21-10-12, 21:23

Dont put over fenders on it youll ruin the lines of the car, just camber the wheels in will look 10 times better

D-turbo-lad

21-10-12, 21:37

Cheres man, tell me about it bitches be dropping there panties for the oldschool 16" alloys haha. sorry didnt see you, you defiantly where not in your yoke anyhow where you? getting tyres tomorrow or Tuesday fitted by that lad across from into the west on the way to frenchpark, forget his name, he has a bead blaster as i got him to fit the tyres for my golf before and that was some headache LOL

hahaha. ya was in mine getn petrol. jasons astra van there as wel beside me. pat mcCrann? id get the 1s beside melvins a do it think them lads are way sounder. . . . make suqe to throw a tyre under the rim nt to damage it when they pop

ali-d1936

21-10-12, 21:42

Dont put over fenders on it youll ruin the lines of the car, just camber the wheels in will look 10 times better

i was never a fan of them either but i think 30mm overs look alright 50mm overs look shite tho

hahaha. ya was in mine getn petrol. jasons astra van there as wel beside me. pat mcCrann? id get the 1s beside melvins a do it think them lads are way sounder. . . . make suqe to throw a tyre under the rim nt to damage it when they pop

ya i think thats him, Who is beside Melvins? didnt know there was anyone in there? christ i must have had the blinkers on i didnt see either of ye, sure im half blind anyway LOL. must do that cheers going to wrap the lip in tape and masking tape so they sont scrape the dish while they are at it :wink:

D-turbo-lad

21-10-12, 21:53

am ballagh tyre center ung lad workn there hes sound nuff ta do ne a that craic.

ali-d1936

21-10-12, 22:46

is he cheap? pat wants E85 for a 235-40-18 fitted, i though that was a good price, might go to that lad from now on so, sure if i have to drive through balla anyway it saves a bit of a trip :) must get onto jason as-well actually for some HID Lights.

D-turbo-lad

21-10-12, 22:57

i got 215/40/17s uniroyal rain sports savage tyre . 65 each new . tink they kep the 1s you want instock mosta the time i fink .ya jay is in spain dis week n hols wnt be bk til nxt saturday

PJ Prendergast

21-10-12, 23:43

Dont put over fenders on it youll ruin the lines of the car, just camber the wheels in will look 10 times better

i second this opinion. i hate overs on s15's, they're one of few cars that look orgasmic with stock aero. looks sick though otherwise, i'm excited to see this build progress

ali-d1936

22-10-12, 17:30

i second this opinion. i hate overs on s15's, they're one of few cars that look orgasmic with stock aero. looks sick though otherwise, i'm excited to see this build progress

ah i really think 30mm overs are grand, they dont alter the look too much but despise the 50mm they bulge too much and look shite, ill see how they sit anyway with the wheels and might consider cutting the pannels and rolling them out further and have a smoother flare.

i got 215/40/17s uniroyal rain sports savage tyre . 65 each new . tink they kep the 1s you want instock mosta the time i fink .ya jay is in spain dis week n hols wnt be bk til nxt saturday

ah there is no rush with them anyway i can wait till hes back, thats a good price for a good tyre, ill get onto him so, kinda tied to pat as hes ordered the tyres in specifically for me.

did the other side today, got my little brother to hold the heat gun on the arches till it was too hot to touch and keep it on them as i worked, and they came out alot better and quicker, and the paint only cracked in one little spot :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121022_173121.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121022_173205.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121022_173225.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121022_173213.jpg

the other side, they seem symetrical enough but ill have to wait until the wheels are mounted so i can fine tune each arch.

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121022_173155.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121022_173142.jpg

also did a oil and filter change today aswell as it was due.

still waiting on heaps to arrive all stuck in postage.

Front bumper,
D-max spoiler,
D-max rear lights,
tyres for wheels,
3" lips for front wheels,
Seat cushions,
tyres for rear wheels,

now starting to pick up a few bits for the Engine for more Power :wink:

peteconneely

23-10-12, 10:25

Coming along well man can't wait to see it finished,good luck with it

ali-d1936

24-10-12, 17:01

Coming along well man can't wait to see it finished,good luck with it
Cheers man,

Finally after about 2 months my vertex lang bumper arrived today, happy enough with the fitment, but the canards where supposed to be included with it but where not :mad: so im getting back onto him to get them!!

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121024_171815.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-1.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121024_171831.jpg

currently still waiting for my other wheels to be delivered, as if they have a low disk face ill split the back wheels again and swap the faces so i wont have to run as much camber on the rear to tuck the rim.

so its just a waiting game.

grange

24-10-12, 17:27

what company did you buy your bumper from mate

ali-d1936

24-10-12, 19:45

what company did you buy your bumper from mate

Guy in england called martin had to do a lot of backtracking to find him, cant remember the company name but i can get it and put you in touch or get you his e-mail if you want

grange

25-10-12, 16:47

looking for bn stuff if you can send me his email that would be sweet

ali-d1936

25-10-12, 22:20

looking for bn stuff if you can send me his email that would be sweet

Sure thing lad ill send it on now bumper took alot of tidying up but im a fussy fucker.

other news front lips arrived today accompanied by a hefty VAT bill (Customs W@**ers)

so split the fronts painted them up just finished putting them together giving the silicone 24hours to cure so will have all tyres fitted saturday and have the wheels fitted and arches sorted Sunday :)... everything going to plan that is :)

ali-d1936

26-10-12, 17:04

Not related to this but got my new wheels today :) took a few snaps :) now have 3" 3.5" 4" and 5.5" lips muhaha

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121026_171719.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121026_171745.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121026_172126.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121026_172343.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121026_172406.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121026_172419.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121026_172427.jpg

tyres getting fitted tomorrow after the silicone fully cures, then all fitted and set up monday :)

dil

26-10-12, 17:09

:eek::eek::eek: class!

Darenm

26-10-12, 17:14

Awesome dude vailside wheels are so cool :):)

ali-d1936

27-10-12, 17:31

Cheers Lads :)

got tyres sorted today after a bit of a muck up, decided to crack on and stick them on,

235/40/18 on 10.5
225/40/18 on 10,

now waiting on my vented front wings from epracing when they are in, but until then the rolled front wings shall do,

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_172812.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_173240.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_174539.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_174550.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_173601.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_173550.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_173544.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_173306.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_173259.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_173248.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121027_173610.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-3.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-2.jpg

need to lower the rear and take out a bit of camber but couldnt be arsed today.

and im still fairly confident ill be getting rear overfenders too. :/

also is ti normal for a lil air to be leaking out between the tyre and lip? i was told they usually do that for a few hours till they settle in.

he didnt use any bead sealer so will i have to let the air out of the tyres and put some bead sealer on and pump them up again?

180sx drifter

27-10-12, 17:38

the rear arches look awesome rolled :)

nikkisixx69

27-10-12, 17:41

i honestly wouldnt bother with wings or overfenders cos it looks awesome like that. to make the front fit all ya gotta do is put in the camber to the max, and i tiny bit at the back and your fitment will be perfect

in my eyes the car is perfect like that!!!

paddyb01

27-10-12, 18:06

ali-d1936

27-10-12, 18:08

the rear arches look awesome rolled :)

ah they came out alright, would need the filler treatment to look there best but im delighted how much of a pull i got on them :) screwed up the passanger side front kicking myself now but its getting replaced so dont really mind.

i honestly wouldnt bother with wings or overfenders cos it looks awesome like that. to make the front fit all ya gotta do is put in the camber to the max, and i tiny bit at the back and your fitment will be perfect

in my eyes the car is perfect like that!!!

camber is to the max, the topmounts are at there limits, i could get camber bolts but its about 10mm to the shock anyway, plus its going to require alot of work, where the loom comes out the wing the grommet is in the way along with the bonnet latch cable, so ill be pulling the wing off tomorrow and cutting up to lift them up as far out of harms way then bash out to make some room for full lock with compressed suspension,

Agreed leave the body alone

il defiantly be getting front wings for comfort ill have a think about the rears.

i think these ones will look nice flow well with original lines and all that jazz.
http://i1098.photobucket.com/albums/g373/s13ryan/7FD4431B-1A0D-4D4D-B2C2-AF3E4D440648-36635-000024BCA0FC305A.jpg

paddyb01

27-10-12, 18:19

Yeah can run the loom thu the engine bay with out cutting any wire i did it to my one was handy or move the fuse box inside the car took me awhile to move it but was deffo worth it

ali-d1936

27-10-12, 18:45

hmm i would love to movethe fuse box into where the passanger airbag was but i planned on sorting the engine bay and engine side of things next year, might just pull it out and oute it through the bay for now i should have done that the first time but ya live and learn, any tips for bringing it through the bay?

ali-d1936

28-10-12, 14:41

Lobbed on the bumper and lowered the rear,

before i started a better look at the arches

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121028_120211.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121028_120218.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121028_120156.jpg

took it down the road and nearly destroyed the front bumper so ill have no choice but to lift up the front a bit, but before that im going to put the transport box on the John deer and pull out the margin in the middle of the road :) seems the easier solution... migh have to do the road all the way into sligo then aswell :P haha

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121028_120713.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121028_140927.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121028_141037.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121028_141018.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121028_141044.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121028_120645.jpg

Spartacus

28-10-12, 16:03

That looks savage man fair play, just keep rolling and pulling the fenders, no need for overfenders. Looks perfect as is. Just hammer and modify everything as is until its driveable like that.

paddyb01

28-10-12, 16:37

Your other bumper looked better....

Dave

28-10-12, 16:39

That is the perfect s15! Please do not put overfenders on the car. As said above pull the shit out of the original arches. Would not change a thing about it!:cool:

subzero

28-10-12, 16:50

man its a serious lookn s15, what offset wheels are on the front ? they rubbing ?? tiz a pain lowering an s15 as the front bumper sticks so far out in front of the car and hits the ground very easy.

ali-d1936

28-10-12, 18:32

man its a serious lookn s15, what offset wheels are on the front ? they rubbing ?? tiz a pain lowering an s15 as the front bumper sticks so far out in front of the car and hits the ground very easy.

18x10 -6 give or take a lil bit but thats what i worked them out to be, rubbing on everything at that height lol, ill have to cut up the metal to try and lift the entry point of both the bonnet cable and loom because as soon as you full lock with the suspension compresssed the tyre will clean them out haha. ya it is and the bumper was so expensive i dont want to destroy it within the first week on the road, might trim the bottom of it and lift it up a half inch will make things so much easier but not keem on that either.

That is the perfect s15! Please do not put overfenders on the car. As said above pull the shit out of the original. Would not change a thing about it!:cool:

ha cheers ill have a think about it.

Your other bumper looked better....

Serious? i hated that bumper the fit around the lights was horrible, and was never keen on the gap between the lights filled up.

That looks savage man fair play, just keep rolling and pulling the fenders, no need for overfenders. Looks perfect as is. Just hammer and modify everything as is until its driveable like that.

ya lots of chainsaw craftsman ship going into it now :) , had to cut a lil lip to make room for the rear camber arms today to get it sitting right, front inner arches are getting a beating now for room :)

paddyb01

28-10-12, 18:49

Ah might be just me so mate i hate the gap between the lights if your sellin the other bumper i might take it

ali-d1936

28-10-12, 19:32

paddyb01

28-10-12, 19:44

ya sure let me know what its worth to ya and ill have a think about it, have another vertex bumper aswell so its a bit surplus.

its just a vertex fiberglass bumper with the peice off a original bumper bonded onto it.

Ah was thinking i never seen one without the gap in the middle
if you get a chance could you pm me some better pic of it thanks

grange

29-10-12, 23:36

oh hell yes :) dish :)

ali-d1936

30-10-12, 00:21

oh hell yes :) dish :)

Ha Cheers man i havent forgoton about you and that e-mail address

Where did you get your overs BTW?

tom.com

30-10-12, 00:41

Looking mean dude,maybe some more camber in the front??

grange

30-10-12, 17:24

no worrys man i wanted to go bn anyways just tought he might do a range of kits. of driftkits.ie brian will sort you out no problemo

PS13!

30-10-12, 19:06

cars looking class! as the lads said i wouldn't go any further with as thats perfection :cool:

ali-d1936

31-10-12, 18:45

Looking mean dude,maybe some more camber in the front??
Cheers Tom, realised today that there was actualy loads left in the front camber adjusters so dilled in What seems to be 2deg but the car was brutle to drive had to fight to keep the wheels straight so put it back to 0deg, its not tracked est its been lowered so id say thats Why the steering was so twitchy so ill get it tracked and try again but it looked heaps better.

no worrys man i wanted to go bn anyways just tought he might do a range of kits. of driftkits.ie brian will sort you out no problemo

Sound man i was onto him before about the front bumper sound guy, ill do that so. Im sure i seen bn skirts and rear bumper for sale i can try and find them if your interested he broke his front bumper dunno if it was repairable.

cars looking class! as the lads said i wouldn't go any further with as thats perfection :cool:

Cheers man, few lil touches Yet and if i ever get my seat cushions back i can finish the intrior.

D-turbo-lad

31-10-12, 19:05

lookd fukn super cool last nite in town. dnt over fender it looks perfect as is.

ali-d1936

31-10-12, 19:20

D-turbo-lad

31-10-12, 19:27

Looked allright for a newholland haha, ah no harm to get them and see how they go would like to take out a lil camber at the back dont want so much camber that the car looks broken haha

Speaking of looking Nice lastnight staggered rsgt's your onto a winner lad, did you get my pm?

haha ya the look super al 7j of them haha. yup got it very tempting i must say just lookn for more photots n that page for insperation :-D

ali-d1936

31-10-12, 19:34

For the money Nice spec new wheels i think they are class. And that 32 is all the inspiration ya need, make them work something a bit diffrent from the norm.

jamieae111

31-10-12, 20:40

im a big fan of what youve done.. love the rear quater.. did u pull the quater panel yourself? lovely car:)

NoelB

31-10-12, 21:28

lookd fukn super cool last nite in town. dnt over fender it looks perfect as is.

Don't tell me I missed this last night?? Fuck 5 o'clock starts :(

Man loving this car. Bumper looks the bizz on it. Dont fender it. Its just perfect as is!

D-turbo-lad

31-10-12, 21:48

Don't tell me I missed this last night?? Fuck 5 o'clock starts :(

Man loving this car. Bumper looks the bizz on it. Dont fender it. Its just perfect as is!

yup lyk 5mins afta u lft. haha. yes agreed dnt overfender as i said ealier.

ali-d1936

31-10-12, 23:19

im a big fan of what youve done.. love the rear quater.. did u pull the quater panel yourself? lovely car:)

ya bought a heater and roller myself and just took my time kind of learned as i went along haha, wouldnt say there is much left in it before the quater kinks and dont want that but might go at it again and see if i can get a bit more

Don't tell me I missed this last night?? Fuck 5 o'clock starts :(

Man loving this car. Bumper looks the bizz on it. Dont fender it. Its just perfect as is!

haha, you from balla? ya im delighted at how the bumper came out took alot of work when i got it tho, fitments was a bit dodge around the passenger light and all lil dipps in it that i had to fill and sand,

yup lyk 5mins afta u lft. haha. yes agreed dnt overfender as i said ealier.

ah ill get them and see they cant be that bad, defanatly need the front wings as i fucked up on the passanger wing rolling it, and if i keep the pulled fenders they will need filler and a respray and want to try the overs before i decide on that.

PeterT

01-11-12, 01:34

Looks feckin great! Love that bumper, personaly id lose the veilside sticker but aside from that, looks savage! especially in your sig!

NoelB

01-11-12, 11:21

BAllyhaunis dude. Was over at total tuning and stopped ta chat ta Gav for a bit.

celicacrasher

01-11-12, 13:58

very nice looking car

ali-d1936

01-11-12, 21:56

Looks feckin great! Love that bumper, personaly id lose the veilside sticker but aside from that, looks savage! especially in your sig!
Cheers dude, must get some proper pictures when its done al i have is my camera phone pos, im quite fond of the sticker its about the only one on it i like bar the jimmy up one on the rear window must scrape off a few of them act.

BAllyhaunis dude. Was over at total tuning and stopped ta chat ta Gav for a bit.
Ah nice one, haunis not a bad spot haha, headin up to jason myself Tomorrow for hids

very nice looking car

Cheers lad

jeff nelson sileighty

03-11-12, 00:37

ali-d1936

03-11-12, 11:33

Fuckin beautiful and as said above I wouldn't go putting on fenders but I suppose no harm in seeing what they'd look like
Completely off topic I actually have your old golf, I have her almost a year but I've always wondered what that switch under the heaters is for , have you any idea or was it put in by the lad after you?

Haha no way i was mad looking on donedeal for it the last year to see where it went, last i seen it was in mayo, that switch is for the foglights if its the silver flick down one, there was no other switch there put if you lob up a pic it will refresh my memory, Hope she is treating you well i remeber looking at it driving away with the new owner it looked so bad ass i was going to ring him up and buy it back LOL.

jeff nelson sileighty

03-11-12, 12:40

Haha no way i was mad looking on donedeal for it the last year to see where it went, last i seen it was in mayo, that switch is for the foglights if its the silver flick down one, there was no other switch there put if you lob up a pic it will refresh my memory, Hope she is treating you well i remeber looking at it driving away with the new owner it looked so bad ass i was going to ring him up and buy it back LOL.

Oh yes that's what I thought it was for but the lad who had it after you must have disconnected em
I wanted to buy it off you when you had it but couldn't scrape the cash together , but ya I bought it off the lad in mayo in December last year , he was complete wanker and plastered stickers on her but I got rid of them
I love the car but on my birthday last year some spastic in a truck side swiped her , he didn't do much damage like nothing structural at all but I couldn't afford to put her back together for a while but have been building her back up and was driving her last week again finally :D she's in good hands anyway ;)
Oh and is it you that is with the mcg autostyling crowd or the last lads?

ali-d1936

03-11-12, 12:42

Oh yes that's what I thought it was for but the lad who had it after you must have disconnected em
I wanted to buy it off you when you had it but couldn't scrape the cash together , but ya I bought it off the lad in mayo in December last year , he was complete wanker and plastered stickers on her but I got rid of them
I love the car but on my birthday last year some spastic in a truck side swiped her , he didn't do much damage like nothing structural at all but I couldn't afford to put her back together for a while but have been building her back up and was driving her last week again finally :D she's in good hands anyway ;)
Oh and is it you that is with the mcg autostyling crowd or the last lads?

ya that was me with MCG, dont work for them or that just sent the picture into him and he uses it for promo. shit i sold that awful cheap as i was leaving for Oz about 3 weeks later or that you should have got onto me i would als strike a deal for a member, sold it to a guy in athlone. thats a bolox about the truck lad, if you are looking for a paint match or that its dragon green,

heres a few pics i found of it when i had it if you are looking of any, i know i did a build thread somewhere, too
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00116.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00508.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00130.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00146.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00537.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00513.jpghttp://i136.photobucket.com/albums/q171/ali-d1936/DSC00520.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00503.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/DSC00522.jpg

and when i got it in like 2006 haha
http://i136.photobucket.com/albums/q171/ali-d1936/golf/DSC00009.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/golf/DSC00046.jpg

jeff nelson sileighty

03-11-12, 13:02

ali-d1936

03-11-12, 13:18

Fuck me that's so cool to see :D ill fire some pics up there tonight when I'm home from work ....I thought twas dragon green aright but it seems to be too dark a shade ...cause I flared the arches and had to spray them .....I know I'm hi jacking your thread big time here but its brilliant to hear and see some stuff about it cause the last lad who had it wad a tool but ill just ask how come the back axel is offset , there's way more poke on the passenger side , had she gotten a new quarter panel and was it you that took off the splitter , any chance u still have it if u did ? :o

ah thats no bother, dunno about that one i only noticed the time i put the wheels on it and brought it to my mate who reckoned it got a new quater at some stage and it was spurious and not a great fit as everything underneath was straight and it was tracking straight, so all i could do was lob a i think it was a 15mm spacer on the driver side to even it out,is the spacer still on her? ha the first drive out the road the splitter fell off and i drove over the driver side one, i repaired it its still somewhere i can dig it out but i cannot remeber the condition it was in.

jeff nelson sileighty

03-11-12, 13:26

ah thats no bother, dunno about that one i only noticed the time i put the wheels on it and brought it to my mate who reckoned it got a new quater at some stage and it was spurious and not a great fit as everything underneath was straight and it was tracking straight, so all i could do was lob a i think it was a 15mm spacer on the driver side to even it out,is the spacer still on her? ha the first drive out the road the splitter fell off and i drove over the driver side one, i repaired it its still somewhere i can dig it out but i cannot remeber the condition it was in.

Ya I was thinking that cause in fairness she's a good straight car so it had me confused but nope someone took that spacer , I must get one for her to even it out , looks a bit funny with one arch flared :p and there's only one of those yokes to change the centre bore left on her ( I cant think of the name if them) :rolleyes: if you could dig it out I'd appreciate it cause I'd more than likely take it , twud really finish her off and I can't afford a new one , especially cause lads down round here would just nick the splitter :rolleyes:

ali-d1936

03-11-12, 13:45

you mean the spigot rings LOL ya they where all on them too had to buy them and i think i through a extra one or two and a few other bits in the boot when i sold it. those xxr's came off Eric o Sullivan's ae86 so there is a bit of history in them LOL http://www.wreckedmagazine.com/blog/wp-content/uploads/2010/09/EricOSullivan.HankookAE86-500x375.jpg i can defiantly dig it out for ya mate no bother and ill get pictures onto ya at worst you can text screw it on :)
i cant remeber if it was exactly 15mm you might need to double check i tryed a few on until it looked right you might need to do the same.
all that car needed was a radio and speakers when i sold it, had some laugh driving it about lol

B&G Extreme Drifting

03-11-12, 23:04

beautiful car dude i love the S15 such a cracking car
fair play for having this one looking so sweet :)

ali-d1936

06-11-12, 17:51

chers man,
my d-max spoiler finally arrived bought it off a guy in england and was begining to think he pulled a fast one as iv been waiting over a month est he "posted it"
cannot decide
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-7.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-6.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-5.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121106_130053.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121106_130340.jpg

or without
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-4.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121106_130431.jpg

think it looks better with it, but not keen on drilling holes in the boot incease i go off it in a few months :/

seanie R.33

06-11-12, 18:12

Deff looks better with it!love the look of it now,good job!!

grange

06-11-12, 18:37

if your selling it put me on the list :)

ali-d1936

07-11-12, 19:56

Deff looks better with it!love the look of it now,good job!!
Ya just fitted it now and it looks awful bare without it so it will defanatly be staying, i was nearly crying drilling the holes in the boot to fit it haha,

if your selling it put me on the list :)

Haha i like your sthyle in for the kill haha looks like it will be staying... Well it will have to now with the holes drilled haha

grange

07-11-12, 20:09

ah shite... haha looks bad ass

martydumpvalve

11-11-12, 15:15

car looks ace ali! love the spoiler! them wheels are class suit the car perfectly!

ali-d1936

14-11-12, 13:38

cheers lads, took a few quick pics,

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121114_125148.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121114_125138.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121114_125133.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121114_125031.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121114_125024.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121114_124947.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121114_124921.jpg

so atm im just waiting on my bride cushions so i can fit my low max seats back on, and finish triming the interior.

then it looks like i will be getting 30mm overfenders and fettling them to about 60mm to cover the wheels with no camber. will end up looking like this a bit but better ;)
http://img600.imageshack.us/img600/2739/7c4s1353.jpg

then just get my 30mm front wings from epracing when they are in then a full respray :)
then hid's and pressed plates :)

tom.com

14-11-12, 13:49

ali-d1936

14-11-12, 13:59

great work man..love it....have a good mate in sligo that will do a full respray and any other custom bodywork if ya need it...i can show ya some of the cars he's done also...realyy high standard and well priced....he's doing my bay in the next few weeks also

cheers tom ya i might take ya up on that, i do everything on my car myself but dont have the balls for paint, im always spraying bumpers or stuff but never happy with the finish. you still in the IT in sligo?

D-turbo-lad

14-11-12, 14:02

ali-d1936

14-11-12, 14:14

meet you there sunday night between the rambling house and the bishop's bend was in the woman's golf 1hid 1 normal light ha . looked fukn super meetin it in the dark leave the nice car alone and not overfender it :D

ha i remeber seeing something with one hid alright haha, ah i have to do something with the rear its sound on the road but backed it into the shed and only 2/3 of the tyre was making a mark on the floor, know it looks class but ill be going through tyres like socks, trust me if it dont look right i wont do it :P other option is shorten the rlca's and i cant find a off the shelf kit that dose it and i couldnt be arsed getting the arms cut and shortened.

ali-d1936

15-11-12, 17:05

so i finally got my cushions back :) meaning i got to stick in my low max's ;)
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121115_161430.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121115_163623.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121115_163629.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121115_163638.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121115_163651.jpg

so i think next will bw a double din radio some red gauges and a new steering wheel :P might fit my harnesses also and buy a camera LOL

juice

15-11-12, 18:02

Are the bridey's the real deal??

ali-d1936

15-11-12, 23:25

I wouldnt have gone retrimming them if i thought they where ;)

ali-d1936

21-11-12, 19:51

so finally bit the bullet and bought some over-fenders, i need 50-60mm, but i think any 50mm overs look bulgey and shite, the only exception is the wisesquare overfenders
http://images.engineeredtoslide.com/wp-content/uploads/2010/11/IMG_1513-560x747.jpg
i like the way the lil pull around the wheel stops the whole wing being pushed out.
but you can see the problem with them that grove that comes out and goes along the bumper looks daft,

so i decided to get 30mm overs off drive n style, and cut and achieve the pulled look around the wheel myself,

so set the wheels to about 1 deg negative camber as opposed to the usual 5 and test fitted the wings,
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-8.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1317.jpg

took them off and started marking out for cutting

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1315.jpg

trying to work out the right angle of the slope and this is the best photo i can find :/ there is going to be alot of trial and error.
http://cdn.mkimg.carview.co.jp/minkara/parts/000/002/612/659/2612659/p1.jpg?ct=b216619e1d89

then these arrived today forgot i had ordered them doubt ill fit them as the 50/50 are really growing on me now nice and simple ;) will fit them and decide then
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1321.jpg

also got a gizzmo boost controler and z32 AFM starting to get stuck for space in the room :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1320.jpg

niall s14a

21-11-12, 20:00

What size an offset are those wheels?

nikkisixx69

21-11-12, 20:07

nearly enough to build a race car bed there!

Dori_Rory

21-11-12, 20:12

Love it ! Awesome work so far!

grange

21-11-12, 20:35

i will gladly mind your wheels on my car if your stuck for space :)

S14a johno

21-11-12, 20:37

nice collection, those wheels ya got off dave?
look the job :afro::afro::afro:

ali-d1936

21-11-12, 20:46

nice collection, those wheels ya got off dave?
look the job :afro::afro::afro:
ya thats them need a refurb and some loving im sure ill get around to using them some day :) just get cantercaps for them now!

i will gladly mind your wheels on my car if your stuck for space :)
haha ya sound as a bell if il mind your mates camero while u mind them ;)

Love it ! Awesome work so far!
cheers man

nearly enough to build a race car bed there!
gonna get a widescreen tv, and make a table out of the wheels and make a setup with the red bride for my brothers steeringwheel setup for the ps3. might aswell use them while they are sat there :) need to get another red bride :(

What size an offset are those wheels?

18x10 -18 18x11 -30

niall s14a

21-11-12, 20:50

Oh dear, I thought they might have been more reasonable than the ones I was lookin at, obviously not! Serious wheels all the same!

grange

21-11-12, 20:53

http://www.facebook.com/home.php#!/S.chassis

did you know your the cover of s chassis?

ali-d1936

21-11-12, 21:12

Oh dear, I thought they might have been more reasonable than the ones I was lookin at, obviously not! Serious wheels all the same! na there a bit crazy alright, planned on getting a s14 and making them fit but that will be a few years away yet

http://www.facebook.com/home.php#!/S.chassis

did you know your the cover of s chassis?

LOL didnt know that man cheers for the heads up, think i added you there aswell.

mattybyrne2008

21-11-12, 23:46

paddyb01

22-11-12, 08:38

S14a johno

22-11-12, 10:32

Agree with paddy it will look like a be Beatle
Go over fenders, they 17 al??
Also Canada new year?

ali-d1936

22-11-12, 17:57

There's some kinda archs on my own s15 that arnt full over fenders there moulded on came in that way from Japan..

http://i569.photobucket.com/albums/ss132/mattybyrne2008/2411C59D-AFAE-4DFB-9BB4-8EA7AD32F57D-269-0000002FF85DAAAA.jpg

Dont do that anyways they look shit

Agree with paddy it will look like a be Beatle
Go over fenders, they 17 al??
Also Canada new year?

as paddy and john said them arches really are not my cup of tea but thats a nice s15 all the same.

na 18's bud, dunno about canada i think ill go back to OZ for my second year dunno where to go tho the woman is in perth but the lads are up in Darwin, decisions decisions humm, how long ya thinking of going for or where about?

dose anyone know if i can cut the overs along this line marked in pencil?
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1331.jpg
if i push it into place it warps around in a few diffrent places? but if i cut it and pin it down below it looks alot better.

so cut out and pulled them a extra 25mm, trying to get the angle of the slope right,
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1328.jpg

think ill go with this, so just get a peice of perspex now and warp it to the 3 points draw a line along it and i have my upper curve, cut that, fit brackets
and start fibreglassing :)

anyone have any tips???

Kruizer

22-11-12, 20:05

Bring it closer to the tire :)

ali-d1936

23-11-12, 13:23

Bring it closer to the tire :)

the top of the curve? when i took that photo it was 35mm above the cut, i let it down to 25mm now, have them all glassed up need a second layer then filler and start sanding :)

ali-d1936

23-11-12, 14:56

fiberglass set from last night, offered it up STILL ALOT OF WORK left to do!!, another few layers of fiberglass start getting down to the basic shape, but its getting there.

front before i removed the bracket
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1336.jpg

rear
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1341.jpg

fitted
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1338.jpg

yeh? neh?

paddyb01

23-11-12, 15:13

yeah i think it looks good :kiss:

ali-d1936

23-11-12, 17:25

yeah i think it looks good :kiss:

Thats a relief to hear ;) haha
Have to Cut the driver side one again dont know what happened at some point after i left them to sit the front of the driver side arch fell in a bit and it looks shit the only way to fix it is Cut pull it out and glass it again Wish i noticed before i put a layer on the back of it >:(
It was only after i posted the photos above i noticed, you can See it in the pics

Is there any other way to do this kind of pull before i spend a shit load of time on it?

ali-d1936

25-11-12, 20:46

well ever est a ute nearly went up in flames on me in Austraila i always said id never be without a fire extinguisher on me so while in halfords i spotted one and i said fec it its only E70, not expecting it to go up in flames but its good to have if ever needs be, only after i bough it i realised its powder but sure its better than nothing lol :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1344.jpg

and finished the wings.. well the sanding side of tings anyway, have given it 2 light coats of primer and going to leave it till tomorrow to finish up, now orderign rivnuts on e-bay so as soon as they arrive its go time :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1346.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1345.jpg

also anyone have a clue where i can get these front wings!!!!
http://i1098.photobucket.com/albums/g373/s13ryan/7FD4431B-1A0D-4D4D-B2C2-AF3E4D440648-36635-000024BCA0FC305A.jpg

i have been looking and i can only find them in Austraila at E450 delivered LOL so im not paying that, so i might just get the front 30mm wings off drive'n'style later in the week and fiberglass over and cover the vent, as i think it will look better than the vent thats there :)

nikkisixx69

25-11-12, 20:56

they look like dmax wings ??? you would defo get them from RHDjapan, but you would get rapped on shipping costs!

ali-d1936

25-11-12, 21:23

nikkisixx69

25-11-12, 21:32

ya man anywhere i found them they are branded as d-max wings in austraila and NZ but the price and postage is rediculas. and looked up RHDjapan aswell and he wanted E320 just for postage haha, i know epracing did them 3 years ago, but now they do the D1 D-max wings that have a step and additional vent along the door and i think it looks muck, they wont tell me where they got them from back then >:(, so only hope atm is finding a second hand set, or bite the bullet and buy from OZ,

with stuff like D-max man your gonna have to bite the bullet and pay big :( its so hard to find any cool shit like that second hand ! the shipping from rhdjapan is ridiculous for some things, i, going buying a d-max boot spoiler off them , but shipping is like 250 euro , 100 more than the actual item itself!! shipping prices are a cunt >:(

ali-d1936

25-11-12, 22:01

nikkisixx69

25-11-12, 22:06

i dont mind paying for the genuine item its the price of the postage thats rediculas, all the ones in OZ are reps, postage is cheap but what they want for them is mad, if i dont get anything but the weekend ill just get a new set and close the vent should look nice with no vent, but would love them ones. do you reckon there is anyway to organise your own shipping from rhd?

oh yeah man ill always pay for genuine stuff, and to be fair, genuine D-MAX stuff is actually really cheap, its just the postage thats makes it expensive!

i dunno if you can or not, i had a debate with them before asking why when i ordered a s14 dmax roof wing it only cost 60 euro postage, but the s15 boot spoiler that is like maybe 3 inches longer than the s14 roof spoiler cost 250 euro in postage, but there was nothing they can do :(

luckily my friend is moving to japan next week so ill probably just get him to send stuff to me :D

ali-d1936

25-11-12, 22:29

haha that would be sweet for ya haham im actually going to try that jessy streeter fella i think that is his name a few people recommended him for getting parts and shipped over see if he can get me them for deacent postage, its just a kick in the balls that there was no shortage of them a few years ago from EPR at a deacent price and now they cant do them.

PS13!

25-11-12, 23:35

nearly there! she'll be some machine when finished :cool:

peterhouze

27-11-12, 02:13

dont know if ya seen this but a few people like it on facebook
http://www.facebook.com/photo.php?fbid=10151234179011597&set=pb.181278396596.-2207520000.1353982223&type=3&theater

ali-d1936

27-11-12, 18:36

Haha thats mad Cheers peter seen its the cover photos of s-chassie on Facebook alright havent seen it anywhere else, LOL

ali-d1936

29-11-12, 13:50

Im on cloud 9 :) just though taking with Jesse Streeter and he can get me Genuine d-max wings the ones iv been after for months :) costing around E400, a good 200 cheaper than RHD japan and thats before i get raped for import tax :/ but fec it i wouldnt be happy with anything less then these. waiting on a final price make my decision, and then, they will be here within 2 weeks. :)

also finished my rear overs, came out well i must say just getting riv nuts now and they wil be on the weekend hopfuly!

and best of all there was savage amounts of banging and rattling coming from the car for as long as i can remember, so maybe im just getting old but decided to investigate, after a quick serch the two adjusters for the boot lid where to short and the boot lid was rattleing, gave them a few turns and presto no noise.

then the exhaust must have been designed for a s14, or the Decat for the car was from something else and too short, as the back of the exhaust was hitting off the rear under-car brace and constently banging. so after looking at the decat and measuring it off a cat converter from a s14, the decat was about 2 inches shorter, so fitted the catalac converter, and the whole exhaust is now 2" further back meaning it clears the brace, so the exhaust now sits higher and no more banging noise, and with the converter in it sounds less raspy and more civilised :P
also made a hanger for the downpipe off the gearbox as i was afraid adding the coverter would put pressure on the downpipe and cause it to crack.

so overall been a good few days.

ali-d1936

29-11-12, 19:59

gave it a wash and tryed on the D-max lights, and stuck the big bolt back into the centercaps as they where missing something with the big hole there.

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121129_163211.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-10.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121129_181322.jpg

and fenders :)

overall 65mm wider,
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-9.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121129_183955.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121129_182413.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121129_182350.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121129_182321.jpg

not feeling the New lights so ill probably go back to the 50/50's

seanyboy s14

29-11-12, 20:08

Im liking the new lights .the dmax wings will suit it

titey86

29-11-12, 20:13

Cool looking car, over fenders look poo though

grange

29-11-12, 20:32

Oh shia just keeps getn better looking :) I love the new fendys :) and lights

ali-d1936

29-11-12, 20:42

Oh shia just keeps getn better looking :) I love the new fendys :) and lights

haha cheers dude :) im delighted with how they came out 4 days and alot of work :) not happy with the lights might.change back but they might grow on me Yet :)

Cool looking car, over fenders look poo though

Ya? What do Ya think is wrong with them? criticisam is welcomed as ill probably be getting other overs from a vertex ridge kit, but ill be doing the same again to them as no overs go to 60mm bought these to See how the flare came out and i really like it,

the only alterantive was these 50mm overs pinched to 60 but dont like the look of them
http://i147.photobucket.com/albums/r299/sx-si/car%20pics/DSC_0003.jpg

Im liking the new lights .the dmax wings will suit it

will all come together when i get the fronts wings :)
should look good according to this picture anyway LOL
http://scrapedcrusaders.files.wordpress.com/2011/03/silvia-s15.png?w=611

playing with the idea of a Origan roof spoiler but dont know about it :/
http://img37.imageshack.us/img37/2498/dsc0870small.jpg

then its spray time have a option to go another colour but i dont think anything other than white would suit it.

PS13!

29-11-12, 22:29

man that thing looks fuck mean!! :afro: class job man

mattybyrne2008

29-11-12, 22:57

really love this car its going be amazing defenitly one of if they not nicest s15 road car in ireland anyway..

serious work man

if only i could get my own car to sit aswell as this

LennyS13

30-11-12, 01:43

WOW perfect just perfect fair play :)

nikkisixx69

30-11-12, 12:51

love the new overfenders, they came out awesome! white is , IMO the best color for s15s!

contacted that jesse streeter dude about a dmax boot spoiler, hoping he will give me a quote with non rape postage! his rep seems to be excellent though!

EDIT:he just got back to me with a quote 250 euro cheaper than rhdjapan!!!!! :D thanks man for metioning him!!!

if your not happy with the new rear lights i might be interested in them in janurary if you decide to sell!

ali-d1936

30-11-12, 15:10

man that thing looks fuck mean!! :afro: class job man
Cheers dude not done Yet :P haha

really love this car its going be amazing defenitly one of if they not nicest s15 road car in ireland anyway..

serious work man

if only i could get my own car to sit aswell as this
Haha Im suprised Im getting away with it so low use it everyday have already had a few scary moments with bumpy roads thinking any second the bumper will be in a million peices haha.

WOW perfect just perfect fair play :)
Cheers.

love the new overfenders, they came out awesome! white is , IMO the best color for s15s!

contacted that jesse streeter dude about a dmax boot spoiler, hoping he will give me a quote with non rape postage! his rep seems to be excellent though!

EDIT:he just got back to me with a quote 250 euro cheaper than rhdjapan!!!!! :D thanks man for metioning him!!!

if your not happy with the new rear lights i might be interested in them in janurary if you decide to sell!
No bother horse, was going to mention him to Ya the last day, but had no dealings with him Yet myself, but he seems sound, i was asking him about a price for secondhand d-max wings from yahoo auctions and he told me he can get them for 300yen cheaper new from d-max, he could have said nothing and pocketed the 300, Im nearly afraid to ask how much the wing was for you i bet it was cheaper than what i paid for mine secondhand LOL.
Was going to get him to chuck a yashio 6 speed shifter in the box but there is no guarentee it would be in it when it arrives.

Any idea how to get around customs when importing it? Not looking forward to shelling out the extra 90 euro when they arrive, can he Stick happy birthday and that on the box and say its a gift? I seen it before where a lad imported wheels and there was ballons drawn on the box and happy birthday written all over them and he didnt get stung LOL.

ali-d1936

08-12-12, 15:10

Few little bits of good news, my D-max wings are on the way so they will be here next week :)

then i somehow managed to find 4 Veilside centercaps for my other set of wheels for a good price too :cool:
http://i147.photobucket.com/albums/r292/tpotter1/IMAG0219.jpg

and now for many years my all time Favourite seats have been these Red Veilside Reclineable Seats :P I always wanted them and Being a bit of a seat whore i said if i ever came accross a set for sale id buy them :P earlyier in the year i seen a Pair with 45% off RRP in UAE for E2,000 :O almoset bouht them, but decided it was a awful waste of money!! same as these
http://g35driver.com/forums/attachments/archived-sales/113702d1257731709-veilside-seats-steering-wheel-img_0994-.jpg

now i have come accross a set in the USA, but they are black not red, still thinking beggers cannot be choosers, so im in talks with him trying to find a price to post them over and if its atall reasonable ill buy them :P
http://conceptautomotive.net/images/D/veilside_vsd1_r.jpg

and also finally bought rivnuts and the tool also so i can finally get my rear overs on
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1354.jpg

and quick picture of the road i have to go up and down twice everyday :P
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-11.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-12.jpg

the joys of daily driving!

Damien

08-12-12, 17:28

You'd want to take a drive down that road with a tractor and give it run of a loader with a bucket.

mattybyrne2008

08-12-12, 18:24

You'd want to take a drive down that road with a tractor and give it run of a loader with a bucket.

haha keep it country ya know your car is low enough when you have to do that

hunty_sideways

09-12-12, 12:18

You'd want to take a drive down that road with a tractor and give it run of a loader with a bucket.

Fuck that mow it and bale it lad, be great feedin in it, top class work will be an insane car when finished just needs the badge ;)

peteconneely

10-12-12, 02:44

this is going be a serious car when finished, cant wait to see it finished.

ali-d1936

14-12-12, 18:49

You'd want to take a drive down that road with a tractor and give it run of a loader with a bucket.

haha have stuck the transport box on the john-deer and gave it a few runs tis a bit better i should stick up a picture of further up the road the road has been washed away on the outside of one corner if the car slipped off going around the corner id be beached :P

haha keep it country ya know your car is low enough when you have to do that
Haha true

Fuck that mow it and bale it lad, be great feedin in it, top class work will be an insane car when finished just needs the badge ;)

is that what your baling out there in you Fendt? haha cheers What badge ya on about? :P

this is going be a serious car when finished, cant wait to see it finished.
will be a few years away till its finished looks like ill be off to Oz again in January so have to start taking it apart to be parked up again LOL.

was bored today and said id polish up the faces on my other set of wheels as im thinking of doing the wheels on the car the same at some stage. just a quick jobbing, only spent about 2 hours on it,
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121214_161026.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121214_161101.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121214_161155.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121214_161410.jpg

Tbh im not mad on it, Reckon something along the lines of a deep purple might be the way to go :)

Kruizer

14-12-12, 20:36

Looks cool fella ;) have the centre's of the dori's being painted purple for that white MX5 I was working on so at least you'll get an idea of what it will look like against the white :)

grange

14-12-12, 22:22

centers look deadly. il pop up every nw and then to blow the cobwebs of her for while your away :P

ali-d1936

16-12-12, 09:42

Looks cool fella ;) have the centre's of the dori's being painted purple for that white MX5 I was working on so at least you'll get an idea of what it will look like against the white :)
Excellent lad, i have a feeling they will look awsome :) as you said yourself the silver centers isnt doing much for the car :)

centers look deadly. il pop up every nw and then to blow the cobwebs of her for while your away :P
Cheers horse :) haha and keep the tyres bald on her aswell :P

Kruizer

16-12-12, 10:44

Not so much on a white car... Will look savage either way ;)

ali-d1936

17-12-12, 18:56

Not so much on a white car... Will look savage either way ;)

ah ya i wanted to keep it looking and i thought that if i painted them a mad colour it would cheapen the over all look of the car, but looking around on a few wheel threads on Zilvia and the likes i think white with purple wheels could be a winner :P

anyhow Delighted after a very long search i finally got the D-max front wings :P
turned up with no damage witch was a nice suprise :)

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1365.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1367.jpg

while i was at the car i needed to sort my washer bottle out, car never had one but i had one off a old mk3 golf fitted, but when the water ran out i had to remove the front bumper and take the bottle off to fill it up :/, so i fitted it in a better position, and got some water hose drilled a hole in the top of the bottle and routed the hose just behind the headlight so just need to pour the water in the hose and no leaks :)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1369.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1371.jpg

anyway the wings, very good quality, and a very good fit, spent a few hours taking off the old wings tidying up behind them, then fixing on the new ones:)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1372.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1373.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1374.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1376.jpg

happy out with them give good clearance and should look good once i get the rear overs on, if i get them on before i leave that is :P might have to wait till sometime in 2014 :P

seanie R.33

17-12-12, 19:03

Them wings are very tasty,well worth all the searching!!

nikkisixx69

17-12-12, 19:08

you get them off jesse streeter yeah?? they look awesome! did you get hit with any import taxes???

ali-d1936

17-12-12, 19:42

Them wings are very tasty,well worth all the searching!!

i know part of me is wanting to keep the original wings but fec it i love these exactly what i wanted and compliments the original lines of the car.

you get them off jesse streeter yeah?? they look awesome! did you get hit with any import taxes???

ya Got them off jesse, 100% reccomend him no hassle and straight out with them, only took 6 days from Japan to Ireland not bad :) no have no idea how i got passed them i seen the post man this morning walking in with them opened the door and i said hold-on untill i get the Vasaline and my wallet he laughed and said i got passed the robbing basterds this time LOL sound fella.

nikkisixx69

17-12-12, 19:44

i know part of me is wanting to keep the original wings but fec it i love these exactly what i wanted and compliments the original lines of the car.

ya Got them off jesse, 100% reccomend him no hassle and straight out with them, only took 6 days from Japan to Ireland not bad :) no have no idea how i got passed them i seen the post man this morning walking in with them opened the door and i said hold-on untill i get the Vasaline and my wallet he laughed and said i got passed the robbing basterds this time LOL sound fella.

haha awesome! yeah my dmax boot wing from him left japan the last day so hopefully it will arrive this week, he is awesome to deal with, super fast communication and cheap!

ali-d1936

17-12-12, 23:38

haha awesome! yeah my dmax boot wing from him left japan the last day so hopefully it will arrive this week, he is awesome to deal with, super fast communication and cheap!

Ya he sent me a breakdown of the costs and he gives himself less than 15euro to do all the work, in fairness sourcing the part having it posted to him then organise it to be posted again, its not a bad deal. Most companys wont post overseas so its great to find somone like him who wont rape you like most other places, and excellent communication always replied to any of my silly emails within a couple hours. The way he wrapped the wings was awsome pleanty of Thought and care went into it i Wish i got a few little bits to fill the cavity in the box could have even got a nardi steering wheel, and yashio shifter amongst other things in there. Highly recommed him anyway!

ali-d1936

18-12-12, 16:07

just a few quick pics after a wash,
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121218_151111.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-14.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/Untitled-15.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121218_150959.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121218_150658.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121218_150708.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20121218_150827.jpg

seanyboy s14

18-12-12, 16:36

shes looking well now .the wings suit it.

broad.sideways

18-12-12, 16:37

the wing are savage looking man. very good looking s15

paddyb01

18-12-12, 16:46

fuck that looks good
think you should spray the centers on the alloys. black?

rico180

18-12-12, 17:02

fuck that looks good
think you should spray the centers on the alloys. black?

I think he should sell me them wheels!!!😎😎 I can't stop l😋😋king at them. They look the dogs bollox !!

Hakosuka

18-12-12, 17:34

Dude this looks killer!

You got so lucky to bypass customs, especially a week before Christmas!

D1SL

18-12-12, 19:51

Wings look savage man

ali-d1936

19-12-12, 10:46

fuck that looks good
think you should spray the centers on the alloys. black?

Cheers lad, ah Dunno about black evan had them black before and try really didnt tick any boxes for me, defanatly leaning twards a deep purple, will prob spray one from the other set of wheels first to See How it comes out before i commit.

I think he should sell me them wheels!!!😎😎 I can't stop l😋😋king at them. They look the dogs bollox !!
Haha was going to sell them for them work meisters on here a while back but dont think i can let them go :)

Dude this looks killer!

You got so lucky to bypass customs, especially a week before Christmas!

I know was sure i was gonna get shafted everything else iv bought from Outside the eu i get stung.

Wings look savage man

the wing are savage looking man. very good looking s15

shes looking well now .the wings suit it.

Cheers lads delighted with the wings alright i was going to save some cash and just get regular wings and fill in the vent and leave it smoothe but glad i didnt now :)

ali-d1936

12-01-13, 19:37

fucking getting plagued with a little miss the last few weeks, its not a full misfire, but idling its rough and every now and again the car jerks a little, i thought it was a boost leak/bad earth/coilpack. so went over the earths and all was ok. so i took off all the pipes and looking into the intercooler the bottom inch was full of water :rolleyes:

this is the result of a little tare on a silicone joiner, but on the upside that pritty much guaranteeing that i have a boost leak somewhere :huh:
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1386_zps817a5d92.jpg
(dont worry about the oil in the picture i was cleaning the joint in prep to put back on read somewhere a smeer of oil on all the joints helps with a seal)

so i drained it out and put all the pipes back on but still have it but its better than it was, so im stuck till i get the replacement joiner

so with the water drained from the inter cooler i was wondering if any damage was done,
so i bought a compression tester,

and happly it showed 145PSI on all 4 cylinders, :)
of course i got proof :rolleyes: the best of the 4 photos i took >:(

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1413_zps539edeb7.jpg
some might think thats a bit low but reading up online iv seen people with 120psi and still have strong engines, so im happy,

i think its good for a car with 207K :wink:
but ill do a wet test soon with a spoon of oil in each cylinder and see if it changes much :)

but one look at the plugs and i knew they had to be changed,

E78 for 4 new denso plugs recommended by nissan

old v new
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1417_zps982b4d9b.jpg

took it out for a quick spin so make sure everything worked ok,

and
Oh
My
God!!

the difference was black and white same kind of pick up low down but as the revs climbed the diffrence the new plugs made was unreal!! :) (not suprised as the old ones looked past there sell by date)

so latley iv been wondering what Mpg i was getting and its working out at 24MPG taking the average over 4 full tanks.
so now ill do 4 full tanks again and see if the new plugs and no boost leaks give me better MPG :)

ah and this is what you car looks like when you use it every day ;)
http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1418_zps309ae276.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMAG1419_zps05aef8f8.jpg

ill get around to washing it some day :kiss:

peterhouze

24-01-13, 16:03

not a bad car i most say

ali-d1936

24-01-13, 18:34

haha Cheers peter, would benifit from a wash. nice meeting Ya dude

conor ryan

24-01-13, 18:59

One mental car! wings suit it

grange

24-01-13, 19:00

How much does it cost you to fill it? Oh and the rear wheels look bronze and I like it :p

ali-d1936

02-02-13, 14:14

haha just copped that now paul LOL thats the plan for the bigger Veilsides was paint the face and lips bronze like the RWB porches :)

gave it a wash and took spme pics :) some Wanker put there foot through the Vertex ridge front bumper last week when it was parked up so its in about 6 diffrent peices, its repairable but it will take a while what a waste of E300 :/ cant have anything theseday Jelous cunts :)

so i lobed on the Spare Vertex for now.

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20130202_124259_zps66083def.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20130202_124224_zpseb4d8c2e.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20130202_124215_zpscfdcc623.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20130202_124102_zps8589a64b.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20130202_124122_zps6d5f46da.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20130202_124131_zpsdec369aa.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20130202_123842_zps9e0ac6dd.jpg
http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20130202_123941_zps72563170.jpg

http://i136.photobucket.com/albums/q171/ali-d1936/IMG_20130202_123829_zpsfd28a34b.jpg

should be looking a lil diffrent in 2 weeks time :)

can anyone Edit the last photo to show the wheels better? i love the picture but the wheels spokes are all fuzzy in it :/

Hachi

02-02-13, 15:31

It's looking awesome dude. Hope you don't drive it through the mud too much though! haha

sparky

02-02-13, 15:53

The car is awesome but the pics and the background is shockingly shit hahha

ali-d1936

02-02-13, 16:36

haha Im no photgrapher alright ;) Ya all the photos iv ever taken With either mine or My brothers phone haha. the better quality pics are from his phone :). thats just a old road didnt realise how muddy it was until i got down there but its been driven on ALOT worse roads believe me it goes everywhere it shouldent its not pampered in anyway :)

tezdude

02-02-13, 17:04

Such a awesome S15, Veilside's are boss:)

Prodrifter86

02-02-13, 17:35

Just Perfect! that is all!

grange

02-02-13, 19:07

unfucknreal ted!

subzero

02-02-13, 19:17

theres some wankers around the place , cant have anything nice these days .

car looks great man , love the way the front wings actually have the s15 line on em that follows up to the rear . very tasty. wheels of course are killer.

ali-d1936

04-02-13, 14:28

Cheers lads, to think i nearly sold the veilsides for rotas before i rebarreled them haha,
Yip man its cat but thats just how it is, Every car iv had has either been broken into or damaged With Someone trying to steal something off it in some way shape or form LOL, its just the way it is dosnt really bother me its just a car. Im sure any scumbags who are at it get Whats comming to them sooner or later :)

rob_180sx

04-02-13, 15:37

Looks unreal dude! :)

PeterT

04-02-13, 21:25

my favourite s15 in ireland atm!

just the veilside sticker is still annoying me haha, aside from that its awesome!

johnnys15

04-02-13, 21:34

dats unreal lad

peteconneely

05-02-13, 22:37

looks unreal sickener bout bumper

rico180

06-02-13, 10:21

Every time I go true your build tread I'm impressed every time. The car looks sick!! It's a credit to ya to for keeping at it. Id love to get them wheels and just try them on the 180 and just see how it would look.

ali-d1936

25-03-13, 19:25

HAHA cheers for the kind words lads,

Well after a few weird noises the Clutch finally gave up the Ghost :(

after alot of thinking i didnt want the hassle of bringing it to a garage and thought sure fuck it i may aswell give changing the Clutch a go myself :) bar changing a engine in a shitty golf a few years ago iv very little mechanical expeirence but im willing to learn :)

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/549210_540695165952849_641418420_n.jpg

got it up

was getting really pissed at this stage LOL

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/p206x206/575981_541117605910605_1879465857_n.jpg

took out the Pressue plate to be greated by a barrage of springs falling all over the floor >:(

http://i136.photobucket.com/albums/q171/ali-d1936/s15/20130306_195519_zps96361a82.jpg

but not one to miss a oppourtunty i bought myself a Early birthday present
Exedy 3puck :)

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/601983_547825448573154_1066409887_n.jpg

so at the moment im just waiting on a Spigot Bush from the states, i snapped a bolt where the Gearbox joins with the Cross member. so waiting for one of the lads to sort that out then get it Through the NCT again :D

peterhouze

25-03-13, 19:48

alan do you live just past inspector nevin think i seen the pool table the other day up that direction the other week

ali-d1936

25-03-13, 19:56

nope not out that way at all lad :)

peterhouze

25-03-13, 20:14

hahahahaha most have been saying things was very hungover that day

veedubmk4

25-03-13, 20:42

That's unreal! Shame about the bumper,assholes!

ali-d1936

07-05-13, 20:50

Well decided id splash out and get a GTST break set up Off Damodean, im not so happy with the fronts as id like something bigger but i know that when i get the car back up and running the s-body Front calipers will be seized again so i though my as-well treat myself and save the headache of trying to free them again :)

is everything i need here for the Conversion?
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/525309_564506543571711_560574115_n.jpg

i was told i needed The skyline front Bolts and Break lines.. but these lines look shorter than what i already have?
am i missing something here?

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/945817_564506523571713_1597382121_n.jpg

these are what i have already...

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/945290_564506540238378_2016975343_n.jpg

My s15 Lines seem a good 2~3 inches longer than whats on the Gts-t caliper already...

i should have a update on the clutch situation next week :D

D-turbo-lad

07-05-13, 20:56

yea everything there u need. have fun re-assembling the shoe set-up :-P . il torque the flyweel AGAIN :-P

ali-d1936

07-05-13, 21:04

D-turbo-lad

07-05-13, 21:08

LOL i know, theres about 20 little springs bolts and clips I cant wait to get stuck in :D haha. your a Queer sound Gavin :kiss: or probably just Queer :D im ordering the flywheel just having problems with my Paypal was hopeing to smash it out this weekend but its looking like it will be next week now before its delivered, would ya be Game to give us a hand with torqueing the bolts and fitting the clutch... AGAIN?

ah wont be that bad to put bk togeather. just do some google'n and that bot how its dne . ya should be as il ave my own dne by dis weekend minus suspension and the few bits to paint !!

grange

07-05-13, 21:10

Just gave you 5 stars for bein sooooooooo greaaaaaaaaaate! See you Thursday chicken xxx

ali-d1936

07-05-13, 21:17

ah wont be that bad to put bk togeather. just do some google'n and that bot how its dne . ya should be as il ave my own dne by dis weekend minus suspension and the few bits to paint !!

nice one ;) give us a bell if ya need a hand with your yoke im free from thursday ill give ya a had and make sum tea for ya :)

Just gave you 5 stars for bein sooooooooo greaaaaaaaaaate! See you Thursday chicken xxx

haha your soooooo sound :) ment to text you i got thursday off so the earlier ya get down the better ill be able to catch new big bang theory and How i met your mother on E4 LOL :wink: