whining noise

[Alan B.]

right, need a bit of advice, replaced the gearbox and clutch in the s14a a while back and got around to starting it up again the other weekend.
when i started it there was a whining noise comming from the car. i shut i off, and tried again and the noise was gone.

then, few days later i start the car up again and the noise is back.
i know its comming from the bell housing as its directly affected by dipping the clutch pedal,
doesnt start and stop as such, just the noise changes.
its not the gear set itself as theres no grinding and the car does drive forward and reverse okay.
the best way i can describe the noise is like the noise a supercharger makes.
i really dont want to pull the box again with no ideas and have the car sitting up another 6 months so can anyone recomend what it could be?

could it be the release bearing?
i did replace it when i did the clutch but if it got dirt in it or wasnt fitted right could that be it?

Oh, and it's an rb25 conversion too.


anyone wanna pull the box and sort it for me????
FML

[Fredericks Balls]

You sure it's not the MRS??





anyone wanna pull the box and sort it for me????
FML


If she's dacent i'll have a look :p












Sorry! Give Yowdy or Bart @ Just Jap a shout they should be fit to sort you out with that

[way2fastforu]

ya didnt put in an orc clutch by any chance??wen you press the clutch in wit them they make a dingle dingle kinda of a sound??its normal if ya have an orc clutch

[Administrator]

My Cusco clutch makes a similar noise and I'm led to believe it's normal? Although I wouldn't exactly call it loud, it isn't really that noticable

[Fredericks Balls]

Actually our Silvia does something a bit similar but it's not very loud. More like when you know it's there you notice it but otherwise you probably wouldn't. I'm told the clutch in it is an ORC Super Single..

[way2fastforu]

Actually our Silvia does something a bit similar but it's not very loud. More like when you know it's there you notice it but otherwise you probably wouldn't. I'm told the clutch in it is an ORC Super Single..

all orc's make that noise its normal some are bit louder than others tho...you'd notice mine if ya were in the car or standin next too it but ya get used to them:D

[twin-cam85]

yep mine is the same but as said above not really loud

[Fredericks Balls]

I haven't driven it in nearly two months I can hardly remember lol. I'll take it out for a spin tonight and see how loud!

[Alan B.]

The clutch kit I used was a blueprint kit.
And it far louder then what you lot seem to have.

There's no way you wouldn't hear this noise. And that's over he sound of the rb Erving with the screamer pipe.

[pole drift]

Lots of people on DW are comin back sayin it's prob the bearing

[Alan B.]

ah, cheers joe, i was practically unconcious when i read your txt earlier.
only justremembered ya txt me when i read your reply.

i cant actually say for sure if it was greased or not greased when going back in. i cant remember to be honest.

[Dunnedriftin]

Skyline used to do it on idle but dont really notice it now... its normal afaik!

[Alan B.]

strange that it never done it before when i bought te car first.

i'll get a recording of it when i get out the workshop during the week
and stick it up.
few people on driftworks recon they had the same noises with dodgy release bearings
as joe said above.
i should have 2 new ones in the boot anyway.

[yowdy]

you have pm

[pole drift]

thursday or friday evening dude ill be able to bring it up for ya with the jeep and trailer

[Alan B.]

joe, wheres your trailer? i might be able to get a jeep or van to tow it tomorrow if i have a trailer.

[pole drift]

joe, wheres your trailer? i might be able to get a jeep or van to tow it tomorrow if i have a trailer.

its in my gaff but the 180 is on it and my da's jeep is blockin it in

[Alan B.]

balls. yowdy, i'll try sort something out first thing in the morning and let you know.