lining up an engine and box

[way2fastforu]

jus throw it in any old way it'll be graaaaaaand

[mick]

bolt em together when there on the ground. an stick it all in together, easyest!

[gem-s13]

fuck the rb25 buy just buy my m3!!! 321bhp standered!! n/a powerzz

[Quealy]

Leave the bmw mounts on the crossmember, make up 2 nice flat square plates with the four holes to bolt on to each side of the engine and bolt these on. Then hoist the engine in to what you think is a nice position and secure it as best you can. Its as simple as making up the brackets to go from the top of the mounts to the plates you've bolted onto the sides of the engine then. You cant go wrong. Obviously easier if you have all the manifolds and stuff off the sides of the engine too. We put a cossy turbo into an e36 before and the brackets turned out lovely. Ill try poke out some pics..

[Driftma]

Leave the bmw mounts on the crossmember, make up 2 nice flat square plates with the four holes to bolt on to each side of the engine and bolt these on. Then hoist the engine in to what you think is a nice position and secure it as best you can. Its as simple as making up the brackets to go from the top of the mounts to the plates you've bolted onto the sides of the engine then. You cant go wrong. Obviously easier if you have all the manifolds and stuff off the sides of the engine too. We put a cossy turbo into an e36 before and the brackets turned out lovely. Ill try poke out some pics..

@ejf86

Get ^^^^^ to do it,cos hes shit hot at it

[ejf86]

cheers for help my plan is to build the car myself with as little out side help as possible