CAC MOTORSPORT 1jz 180sx

[ian g sr20]

The wiring side of things is now comming to the end. Finally. Next up is the exterior and its colour dnt knw weither to go bn kit for next year or origon kit. And colour its looking like a red or a blue for next year.
Few pics of the inside going back together.

[ian g sr20]

Finally all interior wiring is finished with.

Also took out engine to freshing up engine with new bearings etc. And fir lightened flywheel and paddle cluch. As engine was out said id weld the seems so most of that is done nearly ready for paint.


Be going at this tomorow 1st thing hope to have engine bay finished tomorow

[driftjunkies]

tasty work, tasty weldin as well plenty late nites and redbull no doubt..

[ian g sr20]

Cheers lad. Ya alot of work still to be done hope to have it done before xmas then send it for paint early new yr.
Was working on car today. Cleaned down engine bay. Painted it. Sealed the seams also.
Rolled ot outside today to de grease the bay and get it ready for paint.

The 1st coat of primer down.

Engine bay now is painted fully no pics yet but have this 1 just to show colour of bars

[ian g sr20]

Did a bit to car today comming along now on time hope to have it off for paint soon.
Engine bay complete with paint.. just now to freshn up the engine and have it running again.

Fitted some poly bush steering rack bushed. Old ones literly fell out.

Burning out the old bushes to replacd with powerflex ones.


Maming up new clutch and brake lines.

[ian g sr20]

[ian g sr20]

Got around to cdoing a bit to the engine today. Done a comp test all good also done a leak back test passed that also so said i put in a set of acl raceseries bigend bearing. Oil. Ojl filter new plugs.blets etc. And have it a bit fresher for next yr. If it lasts the season it will be a 2.2 next year.

[daz12]

Looking pretty serious since I last seen her lad! Will pop out maybe today or tomorrow for a look off her

[ian g sr20]

Been tipping away at the car late eveings after work comming together on time should b out for testing early feburary.
Took out glass on drivers side to be replaced with polycarbonate.


Both quater glass is cut out and fitted. Happy with the finish from it. And took out rear screen also hoe to have it fitted by tomorow night.

[akasod]

how much would you make me a back box like your brothers one for ?