tinting

[Davie]

the joys of been british lol

[mick]

grrrr! not brittish! fuck youz! haha

[mark]

yea!!! but the slight concave of the window just made these huge big streaks in it every time u wipe em the cme bk instantly

get yourself a heat gun fella

[andy t]

i did da rear windows on da 14 yesterday,

handy enough if you have an idea what you are doin,
just take your time & make sure to get the right shape out of da film before you put it on

( da spray is shite by da way )

[PeterT]

i did the rear 5 on the cef, side ones were grand the back was CUNT in the dark and cold with no patience! its on my to do list again

[shay]

get yourself a heat gun fella

so if i applied it as i did b4 then wre theres streaks and bubbles just waft a heat gun over it and it will settle down onto the window with kno creses or anytin

[mark]

so if i applied it as i did b4 then wre theres streaks and bubbles just waft a heat gun over it and it will settle down onto the window with kno creses or anytin

1;just clean the outside of the window,
2; spray soapy water on the window,
3;lay down the tint clear side up and use your heat gun to shape the tint to the window,
4; when the tint is shaped clean the inside of the window and spray lightly with the soapy water.
5; peel off the clear film and stick the shaped tint to the inside
6;still using your heat gun perfect the tint.
7;job oxo
just take your time doing it and it shouldn't look too bad;

[shay]

1;just clean the outside of the window,
2; spray soapy water on the window,
3;lay down the tint clear side up and use your heat gun to shape the tint to the window,
4; when the tint is shaped clean the inside of the window and spray lightly with the soapy water.
5; peel off the clear film and stick the shaped tint to the inside
6;still using your heat gun perfect the tint.
7;job oxo
just take your time doing it and it shouldn't look too bad;

thanx lad