Follow Us On Follow us on Facebook
Register
Results 1 to 9 of 9

Thread: Injector help

  1. #1
    di Member
    Status
    Offline
    User ID
    1298
    Join Date
    May 2010
    Posts
    431

    Default Injector help

    I got a set of injectors from the lad I bought the 180 off, he said they were 528's but was doubtful....
    There Denso 195500-2460
    Anyway googled the code and they came up as 550's

    The tops are slightly diff to the stock and the s15 ones I have here, and I need to turn the injector plug upside down for them to clip on to injector!

    Are these ok to use?
    Will I change the pins in plug around because I have the plug upside down?

    Here is a pic of them beside s14/s15 and the 550's on right....




  2. #2
    di Member
    Status
    Offline
    User ID
    1298
    Join Date
    May 2010
    Posts
    431

    Default

    Notice the pins on the sr injectors are on the top and on the 550's there on the bottom hence needing to turn plug upside down!
    Is it just simply swap wires?


  3. #3
    di Member
    Status
    Offline
    User ID
    1569
    Join Date
    Jul 2010
    Location
    cork/limerick
    Posts
    924

    Default

    u might have to get a plug for them


  4. #4
    di Member
    Status
    Offline
    User ID
    1298
    Join Date
    May 2010
    Posts
    431

    Default

    Quote Originally Posted by 200sx-slider View Post
    u might have to get a plug for them
    Ya I have seen a plug for them online somewhere but surely if the plug fits the injector I can doctor the wires....?
    The sides of the injectors look to be shaved somewhat for an SR plug to fit


  5. #5

    Default

    Im not sure bout nissan injectors but it shouldnt matter what way the plug is,its simply being switched open and closed so it wont matter which polarity it enters the coil of the injector...open to correction tho...


  6. #6
    di Member
    Status
    Offline
    User ID
    18
    Join Date
    May 2009
    Posts
    552

    Default

    Quote Originally Posted by pt_y2k View Post
    Im not sure bout nissan injectors but it shouldnt matter what way the plug is,its simply being switched open and closed so it wont matter which polarity it enters the coil of the injector...open to correction tho...
    What he said.

    You should be fine to connect it up as is. As long as it's getting a ground and 12v from the right sources it shouldn't make a difference

    i like stuff

  7. #7
    di Member
    Status
    Offline
    User ID
    1298
    Join Date
    May 2010
    Posts
    431

    Default

    Quote Originally Posted by colm View Post
    What he said.

    You should be fine to connect it up as is. As long as it's getting a ground and 12v from the right sources it shouldn't make a difference
    I hoping thats the case! save more messing.

    Can anyone verify this?!


  8. #8
    di Member
    Status
    Offline
    User ID
    470
    Join Date
    Sep 2009
    Posts
    101

    Default

    Yeah doesnt matter what way the wires are on.. you might need to cut a little off the standard nissan plugs to make them fit on properly..


  9. #9
    di Member
    Status
    Offline
    User ID
    1298
    Join Date
    May 2010
    Posts
    431

    Default

    Right have them in and car running but there is a loud ticking noise from the injectors now! Is this normal for some injectors?
    Car has not being setup for 550's yet I only tested it on idle to check if running


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •