Follow Us On Follow us on Facebook
Register
Results 1 to 9 of 9
  1. #1
    Four doors 4 more whores
    Status
    Offline
    User ID
    24
    Join Date
    May 2009
    Location
    Dublin
    Posts
    2,664

    Default 4 wheel alignment for LOW car in North Dublin

    Any recommendations? I want to get the tracking done on the JZX. I've approx 2.5 or 4 inches clearence I think? I can take off the front bumper handy enough but the skirts are a pain in the ass

    Anywhere around the northside direction even into Meath if so.

    Cheers!

    "its cool i guess, but where are the other 2 doors?"

    Sedan Life since 2009
    FrSedan.com

  2. #2
    di Member
    Status
    Offline
    User ID
    31
    Join Date
    May 2009
    Posts
    638

    Default

    i use westside windscreens on the old kilcock-clane road only place ive found that car take low cars and are good ive used them for my 14a which has about 3 inches clearance and my old golf which had less than 2


  3. #3
    di Member mick-skyline's Avatar
    Status
    Offline
    User ID
    220
    Join Date
    Jun 2009
    Posts
    1,254

    Default

    ya not take it down to wez to get set up??


  4. #4
    Junior member
    Status
    Offline
    User ID
    1633
    Join Date
    Aug 2010
    Posts
    75

    Default

    Dave mc cann tyres in coolmine in blanch 60 euro 4 wheel alignment does a good job


  5. #5
    Junior member Tonto's Avatar
    Status
    Offline
    User ID
    1879
    Join Date
    Oct 2010
    Posts
    53

    Default

    scully autocare in clontarf have a flat ramp, ive had my car on it with no issues, and i got fuck all clearance


  6. #6
    Four doors 4 more whores
    Status
    Offline
    User ID
    24
    Join Date
    May 2009
    Location
    Dublin
    Posts
    2,664

    Default

    Quote Originally Posted by will_c View Post
    i use westside windscreens on the old kilcock-clane road only place ive found that car take low cars and are good ive used them for my 14a which has about 3 inches clearance and my old golf which had less than 2
    Ok cheers, i'll keep them in mind

    Quote Originally Posted by mick-skyline View Post
    ya not take it down to wez to get set up??
    Theres no point at the min, I just want the wheel straight (and its slightly pulling to the left) for the NCT. It would be a waste too for now as I dont have any adjustable arms/stuff like that. But when I do he's the man for the job without question.

    Quote Originally Posted by phils13 View Post
    Dave mc cann tyres in coolmine in blanch 60 euro 4 wheel alignment does a good job
    Second time ive been told of him being decent. What about for low cars though? I dropped in before to get some bead sealer on a skid wheel that wouldnt hold air and he wanted to keep the wheel till the next day so I left it. Ill try him so

    Quote Originally Posted by Tonto View Post
    scully autocare in clontarf have a flat ramp, ive had my car on it with no issues, and i got fuck all clearance
    Ok cool, i'll bear them in mind too, thanks for the reply

    "its cool i guess, but where are the other 2 doors?"

    Sedan Life since 2009
    FrSedan.com

  7. #7
    Junior member
    Status
    Offline
    User ID
    1633
    Join Date
    Aug 2010
    Posts
    75

    Default

    would also reccomend scully auto care dealt with jim and tom before sound to deal with also dave will set the car up to what ever way ya want


  8. #8
    di Member Kaleb180's Avatar
    Status
    Offline
    User ID
    128
    Join Date
    May 2009
    Posts
    486

    Default

    Well lad . Could be a bit out of your way but my garage in naas is able to take low cars for tracking ! We've a good setup there and well priced ! If its of interest to ya !

    http://www.finlayford.com/index.html

    [SIGPIC][/SIGPIC]

  9. #9
    di Member S13..KEV's Avatar
    Status
    Offline
    User ID
    122
    Join Date
    May 2009
    Posts
    667

    Default

    heffernan tyres in kildare town.good bunch of fello's and quick to


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •