Follow Us On Follow us on Facebook
Register
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 47
  1. #31
    di Member danny86's Avatar
    Status
    Offline
    User ID
    357
    Join Date
    Aug 2009
    Location
    westmeath
    Posts
    1,608

    Default

    head is wrecked lookin at this yoke..

    any one want a job to get this yoke up and driving???


  2. #32
    di Member danny86's Avatar
    Status
    Offline
    User ID
    357
    Join Date
    Aug 2009
    Location
    westmeath
    Posts
    1,608

    Default

    bump.......


  3. #33
    di Member
    Status
    Offline
    User ID
    1082
    Join Date
    Mar 2010
    Posts
    1,555

    Default

    Don't know if this helps but I had that exact same problem with my 180.
    It was turning over and not starting
    I had the battery hooked up to a van, took off fuel line plenty of fuel being pumped in, kept turning and turning but wouldn't fire

    The problem for me lead back to me messing with the wiring loom.
    I accidentally brushed off some sensor?? don't know what it was for, it looked OK from distance, only when I reached down it was a bit loose (bad connection)
    Then I turned and she fired up first turn

    Image below shows roughly where plug is
    It's worth double checking all plugs and sensors


  4. #34
    di Member danny86's Avatar
    Status
    Offline
    User ID
    357
    Join Date
    Aug 2009
    Location
    westmeath
    Posts
    1,608

    Default

    Quote Originally Posted by johnbro View Post
    Don't know if this helps but I had that exact same problem with my 180.
    It was turning over and not starting
    I had the battery hooked up to a van, took off fuel line plenty of fuel being pumped in, kept turning and turning but wouldn't fire

    The problem for me lead back to me messing with the wiring loom.
    I accidentally brushed off some sensor?? don't know what it was for, it looked OK from distance, only when I reached down it was a bit loose (bad connection)
    Then I turned and she fired up first turn

    Image below shows roughly where plug is
    It's worth double checking all plugs and sensors
    thanks man will check that 2moro.. could be anythin!!


  5. #35
    di Member danny86's Avatar
    Status
    Offline
    User ID
    357
    Join Date
    Aug 2009
    Location
    westmeath
    Posts
    1,608

    Default

    bump........


  6. #36
    di Member
    Status
    Offline
    User ID
    2268
    Join Date
    Jan 2011
    Posts
    88

    Default

    im in the same trouble help please......power going to coils but no earth pulse,so no spark ,starter signal wire not working either so giving it power manually ????????????????????????????????want to do mondello next week help us please sos sos sos


  7. #37

    Default

    Quote Originally Posted by scooby View Post
    im in the same trouble help please......power going to coils but no earth pulse,so no spark ,starter signal wire not working either so giving it power manually ????????????????????????????????want to do mondello next week help us please sos sos sos
    The signal wire runs in the loom under the wheel each check to see if the tyres was rubbing the loom, I ran a cable outside a car from the signal wire in the bay to the signal cable at the ignition it's black with yellow strip yeah?


  8. #38
    di Member
    Status
    Offline
    User ID
    2268
    Join Date
    Jan 2011
    Posts
    88

    Default

    Quote Originally Posted by Davie View Post
    The signal wire runs in the loom under the wheel each check to see if the tyres was rubbing the loom, I ran a cable outside a car from the signal wire in the bay to the signal cable at the ignition it's black with yellow strip yeah?
    ta davie will check in the morning


  9. #39
    di Member gary g's Avatar
    Status
    Offline
    User ID
    706
    Join Date
    Dec 2009
    Location
    galway
    Posts
    692

    Default

    might be a stupid question but did you change the spark plugs? new ones might help?


  10. #40
    di Member
    Status
    Offline
    User ID
    2268
    Join Date
    Jan 2011
    Posts
    88

    Default

    Quote Originally Posted by gary g View Post
    might be a stupid question but did you change the spark plugs? new ones might help?
    have no power to them ,ta anyway


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •