Team Kanjiuma 2011 Nissan Silvia S15 (built by Calicages Racing)

[tweek]

Nice work fair play to Ye lads

One thing tho is that Smiler in the first pic????

[nick180sx]

Nice work fair play to Ye lads

One thing tho is that Smiler in the first pic????

haha only seen him there when ya said it,that'd be smiler alright livin up to his name

[colm]

fair play lads. your not afriad of cutting bits off in that shed anyways

[calicagesracing]

fair play lads. your not afriad of cutting bits off in that shed anyways

That's the way we roll man

You should see what we're getting up to now

[colm]

i may call up soon and have a look. its been a while since ive been over your way

[calicagesracing]

Yea, no bother

I'm sure the lads will have a couple of bits that'll require your particular machining attention while you're here

[colm]

il call up there some evening next week and bring notebook with me so

[Team Kanjiuma (Donjuan)]

Update 10.......17/02/11.

Etch primer

At Calicageracing we etch prime as we go i.e. we etch prime every eve after sanding (when possible), yes I know this is not ideal but we are not full time car builders and garage is damp at times so rust builds up in a matter of days. We just don’t have the time or resources to start and finish the job of sanding down an entire car and etch prime using gun in one go because we all have six day a week day jobs. We use HB Body Fill 961 1K Etch Primer aerosol. Yes it’s expensive but it’s also a fast drying anticorrosive primer, with excellent anticorrosive and mechanical properties for metal surfaces of car bodies which are exposed after intense sanding. Before applying the primer we clean the surface which is going to be primed from rust, oils and dust and shake can thoroughly before use. We apply two coats, within a period of 5-10 minutes between coats,30 minutes after the application it can be sanded with P240 – P1000 sandpaper, dry or with water. It can then be painted over. (Basic stuff for some but I didnt know what etch primer was 2years ago).

[mark]

6 day weeks???
god your some man.

[1jsoarer]

[QUOTE=Team Kanjiuma (Donjuan);242824]Update 10.......17/02/11.
a fast drying anticorrosive primer, with excellent anticorrosive and mechanical properties for metal surfaces of car bodies which are exposed after intense sanding. Before applying the primer we clean the surface which is going to be primed from rust, oils and dust and shake can thoroughly before use. We apply two coats, within a period of 5-10 minutes between coats,30 minutes after the application it can be sanded with P240 – P1000 sandpaper, dry or with water.



is that a direct quote from the back of the can...........ah no fair play man, serious bit of work goin on there!!