Oil Change

[Davie]

Some boy, get a new filter, try using a pair of rubber gloves to get it off first,
If not get a tool, when your using the tool be careful not to grab anynof the starting loom, I grabbed a few wires before in the dark,bastard to repair, mate did the same also, if ya want a lend of a tool gimmi a shout

[serious tom]

Yea, might be able to find a tool, (hopefully) thanks for the heads up on the wires, it's the sorta thing I'd do ha.
Hopefully I get it sorted

[Baz_180]

Easiest way to remove it I found if you don't have a tool was to jack up the car, crawl in under until you see the filter under the intake manifold, then with a long flat head screwdriver and hammer, TAP the inside rim of the filter anticlockwise from underneath. 5mins and no fingers lost. Mine was wedged on though no way it would move by hand.

[shines14]

Easiest way to remove it I found if you don't have a tool was to jack up the car, crawl in under until you see the filter under the intake manifold, then with a long flat head screwdriver and hammer, TAP the inside rim of the filter anticlockwise from underneath. 5mins and no fingers lost. Mine was wedged on though no way it would move by hand.

ya good point about the wedged thing, dont overtighten it whatever you do

[Aidan Hogan]

Easiest way to remove it I found if you don't have a tool was to jack up the car, crawl in under until you see the filter under the intake manifold, then with a long flat head screwdriver and hammer, TAP the inside rim of the filter anticlockwise from underneath. 5mins and no fingers lost. Mine was wedged on though no way it would move by hand.

exactly what i was gonna say , just dont put the new 1 on the same

[serious tom]

Who ever tagged this, eat shit.

[blusrule]

Did you have the car out at all yet? Should be changing after every drift day really.

[twailbait]

Only put the new filter on hand tight.

[S13..KEV]

Did you have the car out at all yet? Should be changing after every drift day really.

i wouldnt bother changein it every event.dont get full use of the new oil.make sure you use the proper filter.it faces out not in so it does not thread on right.some motor factors have differant ones as i found out the night before an event