right bout time for an update been flat out fixing other peoples cars last couple weeks the snows been good for me ha.
started smoothing out any ripples in the rear arches using dolphin glaze to get any of the worse ones out
followed by 3 coats of filler primer
then i layed down a guide coat
then i blocked the 2 back arches with 180 grit, tou can see how many low spots were in them (poxy fiberglass)
then i put down another 3 coats of filler primer and blocked them again with 600 wet followed by 800 and then 1200 came out lovely and smooth looks like a factory arch now so was worth iall the extra work in the end
oredered some blue leds from maplins for my gauges there think they look well
got a bit more done on the front arches to i reinforced the lip wit some p40 fiberglass then trimmed the lip more or less off completely so the wheel doesnt hit
also reinforces up the front of the arches were i have a bumper support strap fitted just to stop it cracking
i then fitted my brakes, hooked up the handbrake and filled the gearbox oil, so everything under the car is finished now
i dropped it back on to the wheels then to roll into the spray booth couldnt get over how small the car looked on the ground it s been on stands so long now ha. just sat the wings up to get an idea of how it will look, looks really wide with the new wings up front
rolled it into the spray booth then took the wheels off have 80% masked up now just finish it off tomorrow morning then start spraying herill be spraying a white base coat first before i lay down the red
i sprayed a few of the smaller parts during the week there well happy with the color i no few people will be like uh red again, i was gonna do it an olive green or champagne gold but i think it ll look much nicer in red so i dont care
all the parts here have:
4 coats of white
8 coats of red
5 laquer
all the main part s and the body will have 5 coats of laquer then be wet sanded using 1200-1500 wet sandpaper the another 5 coats of laquer then wet sand with 2000,3000,and 4000 grit and polishing lotta work but hopefull y be well worth it
![]()


















ill be spraying a white base coat first before i lay down the red 







Reply With Quote


