180sx steering rack....

[200sx]

Looking for a rack for a 180sx with all pipes.......must be perfect no leaky,bent shitters ect.........

close to waterford as possible....

pm or phone me

[Stevo]

If your stuck and dont get one ive a s14 subframe with the rack attatched, mite get ya out of a hole or not!

[200sx]

If your stuck and dont get one ive a s14 subframe with the rack attatched, mite get ya out of a hole or not!

will keep it in mind thanks...........

[Dunnedriftin]

this for a skyline to get rid of hicas?

[200sx]

this for a skyline to get rid of hicas?

its for my cefiro yes,hicas is gone,but all the pipes are still up front and there is like 8 pipes going into the rack at the front,all the pipes for the hicas tread into the rack and return back out,not like the skylines wear there run along side it,so im just doing away with the hole lot and useing a 180 rack and pump.....

[Dunnedriftin]

its for my cefiro yes,hicas is gone,but all the pipes are still up front and there is like 8 pipes going into the rack at the front,all the pipes for the hicas tread into the rack and return back out,not like the skylines wear there run along side it,so im just doing away with the hole lot and useing a 180 rack and pump.....

Thin you gotta change the pump aswell, basicly put the inside of a SR20 pump into the original pump or block of all the veins or something!

[200sx]

Thin you gotta change the pump aswell, basicly put the inside of a SR20 pump into the original pump or block of all the veins or something!

yea i know that if you look at my previouse post you will see i said ''so im just going useing ans 180 rack and pump''.........useing the 180 rack and 180 sx pump with it,will work fine,you can use the original skyline pump if you wish but strip the vains from the rear off the pump to disable the rear and just have the front working you rack........its juts easyier to swap over the rack and the pump together,,,,,the pump wont fit directly as i tryed it befoe just to see and the pump wont go onto the skyline bracket and the sr bracket wont directly fit,its not far off tho,small bit off modding and it will fit........180 rack and pump will sort out any sterring issues the skylines are known for......

[Dunnedriftin]

yea i know that if you look at my previouse post you will see i said ''so im just going useing ans 180 rack and pump''.........useing the 180 rack and 180 sx pump with it,will work fine,you can use the original skyline pump if you wish but strip the vains from the rear off the pump to disable the rear and just have the front working you rack........its juts easyier to swap over the rack and the pump together,,,,,the pump wont fit directly as i tryed it befoe just to see and the pump wont go onto the skyline bracket and the sr bracket wont directly fit,its not far off tho,small bit off modding and it will fit........180 rack and pump will sort out any sterring issues the skylines are known for......

iv all the parts here for mine but havnt fitted them yet

[200sx]

iv all the parts here for mine but havnt fitted them yet

its handy to do even with the engine in......stick in,in and dont be so lazy

[k1984w]

My mate has all parts here there in Dublin here's his number 0868704330