Follow Us On Follow us on Facebook
Register
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 35
  1. #21
    di Member
    Status
    Offline
    User ID
    1328
    Join Date
    May 2010
    Posts
    1,005

    Default

    Quote Originally Posted by Scamper View Post
    Jasus who pissed in your cornflakes

    I was only saying that it could be got from new and mapped cheaper so ya would wanna lower your price, and for 450 you get a savage road map, i got mine done by a fella, i had an average spec and got savage power, and havent had a problem since, so go away with your "you get what u pay for", tons of lads on here use the same fella and in generel swear by him, i doubt were all wrong.

    And as i said for safety, no 2 cars are the same , so would be better to get it mapped again, doesnt matter if chuck fuckin norris mapped it with his cock the first time. And if you know that then why u argueing!

    Thanks ...smooches x x
    im arguing as im tryin to sell something which u clearly dont wanna buy. believe me i see plenty of threads where id like to throw my 2 cents in and say sumtin smart like you. but i kept my mouth shut. its not hard

    "savage road map" ................... ???????????
    maybe it is, id be sceptical..... i wont disagree wit you but i certainly wouldnt agree... i got a savage dyno dynamics map. mapping takes time, only so much (very little) IMO you can do on a road. my car took about an hour and a half mapping rough, then another hour or so gettin it safe............


  2. #22
    di Member
    Status
    Offline
    User ID
    246
    Join Date
    Jul 2009
    Posts
    1,608

    Default

    Quote Originally Posted by Scamper View Post
    Jasus who pissed in your cornflakes

    I was only saying that it could be got from new and mapped cheaper so ya would wanna lower your price, and for 450 you get a savage road map, i got mine done by a fella, i had an average spec and got savage power, and havent had a problem since, so go away with your "you get what u pay for", tons of lads on here use the same fella and in generel swear by him, i doubt were all wrong.

    And as i said for safety, no 2 cars are the same , so would be better to get it mapped again, doesnt matter if chuck fuckin norris mapped it with his cock the first time. And if you know that then why u argueing!

    Thanks ...smooches x x
    i havent been back hear since my last comment,,,my,my is this getting intresting.......you have no intention off buying the ecu scamper,and you didnt from the start,,,,your just spamming the mans tread,so am i righting this but i just cant help myself.....for 450 you get a savage road map....im sorry but road mapping cars isint the right way to map a car.....anyone that thinks different can lick my balls.im right there wrong......Thats my opinion and im sticking to it.....you can get a savage road map for 450......well the lad who mapped this ecu cost 600-700 as bubble said cause he has a good reputation and can map good,and the power/torque figures that bubbles car was produceing shows that....and there was a good few other people there getting there car mapped that day,why didnt they get the savage road map for 450?they all can be wrong right?????????.......The price on the ecu is what ever the man wants,you have no intention in buying it so fuck off out it......

    lots off love the savage 600-700 rr map!!! xxxxx

    Thats the craic she said with one leg on the dash and nothing on but the radio............

  3. #23
    di Member Scamper's Avatar
    Status
    Offline
    User ID
    53
    Join Date
    May 2009
    Posts
    1,292

    Default

    Quote Originally Posted by bubble1984 View Post
    im arguing as im tryin to sell something which u clearly dont wanna buy. believe me i see plenty of threads where id like to throw my 2 cents in and say sumtin smart like you. but i kept my mouth shut. its not hard

    "savage road map" ................... ???????????
    maybe it is, id be sceptical..... i wont disagree wit you but i certainly wouldnt agree... i got a savage dyno dynamics map. mapping takes time, only so much (very little) IMO you can do on a road. my car took about an hour and a half mapping rough, then another hour or so gettin it safe............
    Road map has live scenarios and conditions, not in a room with fans blowing on your car , dont get me wrong dyno maps can be savage, but you cant go wrong with a road map either, 6 of one half dozen of another. All im saying if ya wanna sell this, lower it to at least 200, im only trying to help and get u a few quid, and your getting all defensive...

    Oh and btw my mapping took the day to service and get the car ready and then 3 hours on the road, and covered every aspect from best fuel consumption driving, to all out boost the balls off it, so dont talk shit about something ya dont know about.

    Ill leave ya too it, my advice, put a nice shelf up in your shed....... ... u can store your ecu up there after ya dont sell it for 300.

    GLWTS


  4. #24
    di Member
    Status
    Offline
    User ID
    1355
    Join Date
    May 2010
    Posts
    237

    Default

    free bump for amusing reading!!!!!


  5. #25
    di Member
    Status
    Offline
    User ID
    1328
    Join Date
    May 2010
    Posts
    1,005

    Default

    Quote Originally Posted by Scamper View Post
    so dont talk shit about something ya dont know about.



    Ill leave ya too it, my advice, put a nice shelf up in your shed....... ... u can store your ecu up there after ya dont sell it for 300.


    GLWTS
    wat d hell do u know about mapping??? at least iv studied engine management......... now whos talkin shit.
    u just said servicing was part of ur mapping, thats your own prep work u fool. real scenarois? like what. an erthquake?? a tsunami.

    what do i know? i just got a text tellin me that u always ask silly questions on here, dont get me wrong, theres nothing wrong with that whatsoever, but what suddenly gives u d right to act like u know it all with your road mapping rules. suck my baby finger

    dont tell me not to talk "shit" on my own thread. piss off or pm me. dont annoy me on here.


    sorry for the language but ur pissin me off.


  6. #26
    di Member Scamper's Avatar
    Status
    Offline
    User ID
    53
    Join Date
    May 2009
    Posts
    1,292

    Default

    Easy rattle your cage when i was trying not to... no bother man, hope ya sell it.

    oh and ya sometimes i might ask what seems like to others a stupid ques on here, but were all learning bud, and if i dont know something im not asheamed to ask, i like to give my opinion as do most on here.

    sorry if i came across wrong but ya would wanna chill a bit

    Honestly good luck with the sale


  7. #27
    di Member
    Status
    Offline
    User ID
    1328
    Join Date
    May 2010
    Posts
    1,005

    Default

    Quote Originally Posted by Scamper View Post
    Easy rattle your cage when i was trying not to... no bother man, hope ya sell it.

    oh and ya sometimes i might ask what seems like to others a stupid ques on here, but were all learning bud, and if i dont know something im not asheamed to ask, i like to give my opinion as do most on here.

    sorry if i came across wrong but ya would wanna chill a bit

    Honestly good luck with the sale
    i didnt say u asked stupid questions, i appreaciate we are all tryin to learn. but you say that and yet u seem to know it al when it comes to mapping and my bloody ecu. i do not over valus stuff, im not a rip off, and this is a good deal, i know it. and plenty of people would agree with me. PLENTY

    y did u bother tellin people its not gud value. this is a for sale thread. if u want it, buy it. if you dont.... then leave my cage alone, as iv been sharpenning my beak for a while now and u will get bitten.....

    thanks for all the free bumps.


  8. #28
    di Member Scamper's Avatar
    Status
    Offline
    User ID
    53
    Join Date
    May 2009
    Posts
    1,292

    Default

    Ill say no more, GLWTS


  9. #29
    di Member
    Status
    Offline
    User ID
    1328
    Join Date
    May 2010
    Posts
    1,005

    Default

    Bump up 4 the overpriced ecu


  10. #30
    di Member
    Status
    Offline
    User ID
    1971
    Join Date
    Nov 2010
    Location
    Cork city
    Posts
    958

    Default

    Bump for the smile this thread put on my face lol
    Overpriced ecu FTMFW


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •