s15 drift build (ex healy hankook car)

[chriskeogh]

Im breaking my s13 drift car from prodift last year. It has johnny p's old engine from the candy orange 180 he built. Its fully built engine good for 450bhp, if your interested let me know. i'll have all the parts up soon enough in the parts section.

[jdmjimmy]

few bits iv picked up while on the look out for running gear

work meister s1's 18x9j +22 yum yum



Uploaded with ImageShack.us




Uploaded with ImageShack.us


red fixed back bride seat also have the head rest to go with it

[docco86]

did ya buy them off carpo?

[jdmjimmy]

yep comin tomoro...just need 2 more nw..or 4 even lol

[jdmjimmy]

sooo the time has come to get bring the s15 back to life you probably have seen my s14 which was bought as a donor early on in the summer i learned alot in that car includin ho w to wreck the rear quarters lol anyway heres some pics of hw its going


ooohh just tought i would add these are her shoes :-)

2x work meister s1 18x9j et33, rears 2x work meister s1 18x9.5 et24 0 disk,2x work meister s1 18x10.5 et24 0 disk suit s15 much ?






here is how the s14 was looking for her last drive o the garage..







wel roughened up but runnin 100%

removed the bonnet for easy access then all ancillaries front mount,rad,oil cooler,loom etc



so then with some help from danny86 on here we got this far the following evening

[jdmjimmy]

crack on then ...got the engine and box mounted into the s15 yesterday evening next job is swap over the looms and then diff shafts fuel system etc still a good bit of work to be done.anyway heres some pics





popped on the meisters to see what stance will be like i guarantee there will be SLAMAGE !! CAMBER!! and hellaflush all together lol







stuck in a headlight for effect







thats about where its at oh i also got some blue vinyl wrap either gonna wrap the car in it or make some mad graphics

would look like this except i got a deeper blue


oppinions welcome

[gone0-60mph]

Savage job jimmy..... Cant wait to see it on the track a bit of local representation in pro drift wont go astray

[jdmjimmy]

Hopefully get it built first anyways lol

[jdmjimmy]

got some more wiring done engine loom and pipework done fuse box secured in place just need general tidy up and clean,relocated harness over wheel well also





interior original loom and heaters stripped out

and the new loom swapped in c/w heater unit




have been in holland and belgium all week so should get more work underway next week..

[docco86]

id say ur borke after the red light district...