sr20det rattle?

[ian g sr20]

Wen reving the engine between 2000 and 3000rpm engine gives a rattle sounds 2 be bottom end does bottom rattle on these aroung the rpm ?

[S14a johno]

doubt it, is it uk spec or jsp spec?
becasue that usely the sprocket i tink that what it called
it on the front right of the engine

[ian g sr20]

uk spec, it dnt sound 2 be vvt rattle iv had that rattle before in other s14's

[sr20180sx]

big end bearing's i reckon happend to me twice!!

[ian g sr20]

f**k it anyways

[200sx]

i wouldnt jump the gun.....could be a million and one things.....i do laugh when questions like this pop up and people automaticaly say bottom ends,its a good possibility,but could also be a 100 and 1 other things....get some else to rev the car while you stick your head in the engine bay,have a look for the obviouse things you can see with the eye,something loose,loose bolts ect...then work from there!!!

[bossman]

i wouldnt jump the gun.....could be a million and one things.....i do laugh when questions like this pop up and people automaticaly say bottom ends,its a good possibility,but could also be a 100 and 1 other things....get some else to rev the car while you stick your head in the engine bay,have a look for the obviouse things you can see with the eye,something loose,loose bolts ect...then work from there!!!

exactly,people always assume the worst first off.

[pole drift]

I reckon the giggling pin has fallen out of the laughing shaft

[andy t]

happend a friend of mine & he went & done da bearings & it wasnt the problem at all, still not solved !

[poggy]

If it ain't the usual vvt rattle it could be....

Could be the top chain guide take the rocker cover off take it out and see if it stops. Nothting loose a round the turbo, heat shields etc is it standard?
Not sure but it could also be a knacker hydraulic lifter.