Originally Posted by Robbie Daly Ps13
Bleeding the back brakes with the hybro won't make a differance....! Are the 2 lines going into each caliper at the back the same lenght....! You bleed the m/c by just opening 1 of the lines going into it....!
Right il tell ya what 2 do...! Start bleeding the back driver side caliper then move to the front passanger side and bleed it...! Then move back 2 the back passanger side and finish with the front drivers side....!
And make sure your calipers are on the right way and theres no leaks in any of the lines.....!
If you do all this and and it still don't work its your m/c because i hve seen them go when let run dry...!
Good luck....
I had good preasure before i changed the calipers and removed the abs, lines on the hydro are ok it was in when i had good presure, Lines at the back are different lenghts front are the same lenght.. I'll try bleed the cylinder..
Follow Us On
Results 21 to 30 of 35
Thread: Is my master cylinder f**ked????
-
29-09-10, 21:23 #21di Member
- Status
- Offline
- User ID
- 312
- Join Date
- Jul 2009
- Location
- Meath
- Posts
- 970
-
29-09-10, 21:26 #22..................!
- Status
- Offline
- User ID
- 685
- Join Date
- Dec 2009
- Posts
- 3,043
If there different lenghts bleed the longest 1 first...!
-
29-09-10, 21:27 #23di Member
- Status
- Offline
- User ID
- 312
- Join Date
- Jul 2009
- Location
- Meath
- Posts
- 970
I'v done this for 2-3 hrs for 3 day's lad it just wont work.. Originally Posted by Robbie Daly Ps13
-
29-09-10, 21:34 #24..................!
- Status
- Offline
- User ID
- 685
- Join Date
- Dec 2009
- Posts
- 3,043
Try another m/c cylinder so lad is your best bet...!
-
29-09-10, 21:38 #25di Member
- Status
- Offline
- User ID
- 312
- Join Date
- Jul 2009
- Location
- Meath
- Posts
- 970
Dose the bleed nipple on the front have to be on the top cause there not but i never had them off or can they be put on the wrong side?
-
29-09-10, 21:45 #26..................!
- Status
- Offline
- User ID
- 685
- Join Date
- Dec 2009
- Posts
- 3,043
BINGO......! Theres your problem lad.......! They will not bleed if there on the bottom....! Your calipers are on the wrong way round...!
-
29-09-10, 21:47 #27di Member
- Status
- Offline
- User ID
- 312
- Join Date
- Jul 2009
- Location
- Meath
- Posts
- 970
I never had the front off and had good pressure before!! Can the front calipers be used on both side's leavint the nipple on the top?? Originally Posted by Robbie Daly Ps13
-
29-09-10, 21:48 #28..................!
- Status
- Offline
- User ID
- 685
- Join Date
- Dec 2009
- Posts
- 3,043
Yep there the wrond way round now....! Just switch the around....!
-
29-09-10, 21:51 #29di Member
- Status
- Offline
- User ID
- 312
- Join Date
- Jul 2009
- Location
- Meath
- Posts
- 970
I'll do this tomorrow can't belive i had pressure before if they on wrong was obviously just lucky no air got into the system!! Originally Posted by Robbie Daly Ps13
-
29-09-10, 21:54 #30..................!
- Status
- Offline
- User ID
- 685
- Join Date
- Dec 2009
- Posts
- 3,043
I dunno how you did....! Don't worrie your not the 1st lad ever to make this mistake.....
Reply With Quote