offset

[podge]

if i have a offset on a set of wheels of plus 24 and swap the dish around wat offset will i have then ie using the back dish on the front of the wheel wheels r a 9 on the front and 10 on the back

[obriener2054]

firstly 24mm is 0.95 of an inch

so add that twice to half of the width and theres your answer for the dish.... appproximately, as it depends on the actual dish



in other words huge dish........ offset of -48 as an approximate

[podge]

firstly 24mm is 0.95 of an inch

so add that twice to half of the width and theres your answer for the dish.... appproximately, as it depends on the actual dish



in other words huge dish........ offset of -48 as an approximate

yikes sounds kinda extreme considering i need a 20mil spacer as well to clear the calipers