my ps13 build the endless money pit :D

[Hachi]

Sweet dude, Should be good for some pics then soon ay

[way2fastforu]

@bnollie ah ill only have to change if i want firm pedal...wont mind if its only small bit spongey.

@matt oh ya def be ready for some pics soon goin thrownin everythin onto car monday an goin beatin the arches out a bit wen iv the front hubs off for more low

[way2fastforu]

update today...my sledge hammer met my front arches today an made loads room for my wheels an more low jus have to extend the wirin loom on the driver arch to clear the wheels....bads points are i need a track road end cos one mines fooked an need a rubber boot for the steerin rack cos one mine has a tear in it.

anyway got a package in the post today an it was my godspeed tension rods


and i fitted my s14 front hubs an skyline brakes


an fitted the tension rods too


bad thing is now i need the skyline master cylinder cos the s13 one cant build up enuf pressure wen the engines runnin to give me a firm pedal

[Robbie Daly Ps13]

Jesus never heard of that problem before....!

[sil80drifter]

the s13 cylinder should be fine man, im using a standard 180 m/s with r33 brakes all around

[way2fastforu]

heard of it happenin few times...the brakes work like its just the pedal is very soft

[sil80drifter]

heard of it happenin few times...the brakes work like its just the pedal is very soft

i had that problem first but it was the 180 m/s that was faulty put a new one in and it worked

[way2fastforu]

my one was workin fine till i put the liner front brakes on...so master cylinder should be fine an wasnt let run low so no air in the system after i bled it

[Robbie Daly Ps13]

You sure its bled 100% sometimes there a bastard....!

[sil80drifter]

my one was workin fine till i put the liner front brakes on...so master cylinder should be fine an wasnt let run low so no air in the system after i bled it

exact same with mine, even ask yowdy, brakes were perfect till the skyline calipers went on and then couldnt get good pressure in the pedal, swapped the m/s and servo over and bingo!