performance plugs

[robbie@tdp.ie]

Don't use Denso iridium plugs in any RB.

Robbie

[mick-skyline]

ste might be able to hook you up text on the way. denso eh... no thanks, NGK all the way. couture eh... no thanks either unless you wana get sold something you dont need and ass raped on prices then im all good.

[ste]

can you recommend plugs and oil please robbie

[mick-skyline]

NGK plugs and mobil 1 15w 40 oil robbie will recommend the same id say

[suislide]

im based in tallaght

[robbie@tdp.ie]

BCPR7IEX for the expensive Iridium ones and

BCPR7ES for the std ones. The should be gapped at .7-.8 mm when fitted.

Mobil 1 Motorsport 15w 50

Robbie

[Fredericks Balls]

BCPR7IEX for the expensive Iridium ones and

BCPR7ES for the std ones. The should be gapped at .7-.8 mm when fitted.

Mobil 1 Motorsport 15w 50

Robbie

Sorry to hijack here, but I was told NGK BCPR7 for 1JZ too but when I went to get them I realised I was left a few letters short... Would I be using the same plugs & gaps or are the gaps engine specific?

[ste]

BCPR7IEX for the expensive Iridium ones and

BCPR7ES for the std ones. The should be gapped at .7-.8 mm when fitted.

Mobil 1 Motorsport 15w 50

Robbie

Thank you for that robbie.. Appreciate it