kevin o connells 180sx

[Aidan Hogan]

Is the prodrift at the back a sticker or is it cut into the car ??
Looks very well there.
The 180sx looks weird on the centre panel for some reason though
Also what kind of front lights are they ??
They dont look standard .

[DeaneMsport_180sx]

Is the prodrift at the back a sticker or is it cut into the car ??
Looks very well there.
The 180sx looks weird on the centre panel for some reason though
Also what kind of front lights are they ??
They dont look standard .

i had an old visor and instead of throwing it away i salvaged the PRODRIFT from it and stuck it there
ya i know the 180sx on the back pannel looks wierd its just a sticker i made up to fill it up cause i didnt like it blank and i couldnt fand the original font
the front lights are just in sleepy eye but the standard lights are removed and i bought them at a show....cudnt tell you what make dey are tbhlol

edit:shit you mean the back lights is it??the car started out as a 200sx and they are the standard lights the centre panel is just painted white

[Aidan Hogan]

i had an old visor and instead of throwing it away i salvaged the PRODRIFT from it and stuck it there
ya i know the 180sx on the back pannel looks wierd its just a sticker i made up to fill it up cause i didnt like it blank and i couldnt fand the original font
the front lights are just in sleepy eye but the standard lights are removed and i bought them at a show....cudnt tell you what make dey are tbhlol

edit:shit you mean the back lights is it??the car started out as a 200sx and they are the standard lights the centre panel is just painted white

no i meant they front , looks like a cool car though

[DeaneMsport_180sx]

180sx sr20 det 2.0 drift car 352bhp
the spec:
Engine:
Wisceo oversized forged pistons + forged eagle conrods
New ACL racing crank and conrod bearings
ARP conrod bolts + ARP head stud kit
1.2mm Cometic metal head gaskets
New water and oil pumps
New oil crank seals
New valve seals
All valves re-seated and re-faced
All pressure tests etc carried out on head
New timing chain kit (new tensioner, chain, guides and sprockets)
Troublesome VVT removed and replaced with adjustable cam gears
Every possible head seal replaced
New intake, exhaust, turbo and downpipe gaskets
New Denso Iridium spark plugs
HKS gtss turbo
HKS actuator
HKS tubular manifold
Autobahn88 intercooler
Autobahn88 turbo elbow
Mishimoto aluminium rad
Mondeo electric fan
3 inch straight through exhaust with 4.5 inch tail
Apexi air filter
Race battery
Walbro fuel pump
Walbro fuel pressure regulator
Motec m4 ECU mapped by TDP
air flow meter removed

Transmission:
HKS single plate organic clutch
HKS pressure plate
HKS lightweight flywheel
DeaneMsport r33 gearbox conversion
Custom propshaft
3:7/3:9/4:3 welded diffs

Suspension:
TEIN super street fully adjustable coilovers
Cusco adjustable tension rods
TEIN adjustable back camber arms
Driftworks adjustable toe arms
OMP front strut brace
Rear subframe solid collars
Extra lock kit
Geometry set up done by deaneMsport

Brakes:
R32 gtr front brakes with drilled disks
Braided lines all round
hydraulic handbrake
Standard 200sx rear set up

Wheels and Tyres:
Rota subzeros 17x8 black with polished lip
Silverstone FTZ sport TRR semi slicks(front)
Nexen N3000 245/40/17 rear wet
Federal super steel 595 225/45/17 rear dry

Exterior:
Painted ford cosworth white
Gold graphic with black underlay
Uras replica kit
Towing eyes
Black bonnet
Bonnet pins
Kouki spoiler
Rear strobe kit
Sleepy eye conversion with xeon lights

Interior:
6 point roll cage with door bars painted white
OMP bucket seat
OMP 3' harness
Sparco 3'deep dish steering wheel
Defi boost gauge
Power cut off switch
Volt+oil pressure clocks
Custom aluminium door cards/foor cards/centre console
Foliatec gear knob
Race ignition switch
Drift handbrake button
Fire extinguisher
Sound deadenind removed and painted matt black

Performance:
352bhp and 331 ft/lb torque @ 1.1 bar boost

[DeaneMsport_180sx]

does anyone else have any ideas for changes they would like to see on the car or is it just absolutly perfect?lol

[Bobbys14]

The breather pipe over the manifold wrap it up it will burn very quick, car looks well its yourself you should be asking about changing anything as its yours and you'll be the only one driving it!!

[DeaneMsport_180sx]

The breather pipe over the manifold wrap it up it will burn very quick, car looks well its yourself you should be asking about changing anything as its yours and you'll be the only one driving it!!

the pipe has been like that for a while and it seems ok cause the manifold is a good bit away from it
i know i have a few ideas in my head but im just trying to get a few ideas if you know what i mean
i always like to hear people oppinions cause there is people out ther wit minds a lot more creative than mine lol

[DeaneMsport_180sx]

this car is no more!!

sold the shell the other day...was a sad day

but i also bought a new shell
ill be starting a build thread in the next few days so keep an eye out...should be a fair few cool things being done over the winter

[Aidan Hogan]

what ya doing with the new shell ??
same shell ??

[DeaneMsport_180sx]

just going to put all my running hear into it but goin to do all the jobs to it that i couldnt do with the old shell cause it was too rusty
ya its another 180 alright...its steven shines old shell...absolutly MINT and a serious cage too