First off, since day one ive been planning to thank every single person who has made an effort to help me, and to be honest if i did that not only would it take up about 10 pages, but id end up missing out many people.
if you helped me I'm ever so greatful! no matter how small it was, it all went towards me researching, asking questions, being tought, learning, knowing where i went wrong, knowing what to do in future etc etc etc.
People have put up with me for a very long time, asking 1,000,000 questions.
THANK YOU EVERYONE! I can remember every bit of help i got.
You have all contributed to me buying my first car... ever... at 17.
As its my first car ive not really known what to expect, If im honest i know a lot about s-bodies, (in theory) and now that i own one its a new experience, I realise know fuck all when it comes to 'hands on' tinkering/knowlegde of the car. which i find good.
Ive already got plans for it and i predict i can move fast at transforming it into a "anti-christ of a yoke" :L HAHA.... not really.. the hell with civic's, bora's, golf's, and glanza's.
180's FTW!
I love the way i can use the forum as such a great base for tech info and help! It's brilliant! I can finnaly use the forum to its potential !!!
Oh! and some one please inform other new-er members of what ive been like the past 18 months
anyways....
This is my '97 180sx (as half the country already knows it)
SPEC
Blacktop (non vvt)
Hybrid t25
Aftermarket Clutch
FMIC (off an mr2 or evo...)
HKS Air Filter
Exhaust after Cat-back
Nismo extra lock arms
Coilovers JIC + Tien *face palm*
Nardi Steering wheel
Sparco Bucket
G-HAY / Weak Wheels
Yea so i picked it up on monday after school, treked to wicklow.. (village chippy thank you)
Yea.. you get the idea...
interior needs a clean up, it is sort of thrown in.. undecided wether to strip it out completly yet :/
Other angle.. gota get that sorted.. i have sorted plans
This is not me...
This is also not me... ANY ONE HAVE A RAIL FOR THIS???
ALL COMMENTS WELCOME! i have plans
Follow Us On
Results 1 to 10 of 137
Thread: Its about time say's you!
-
26-05-10, 17:58 #1di Member
- Status
- Offline
- User ID
- 34
- Join Date
- May 2009
- Posts
- 2,143
Its about time say's you!
-
26-05-10, 18:01 #2di Member
- Status
- Offline
- User ID
- 34
- Join Date
- May 2009
- Posts
- 2,143
Then this happened.....
Bit of camber dialled in via the top mounts..
i hear there are a pair of nismo rods... ?
One coil over is tien other is JIC Magic.. both rears are JIC Magic..
Just to show the wings as i got them....or i mean.. when i didnt get the. ha.
Just cleaned it then, just to have something to do..
Next move was to make it look half normal.... went from this ......
So within a day I had these dropped off and fitted... need bolts... 6mm bolts?.....yea?
To this.....
+
-
26-05-10, 18:21 #3di Member
- Status
- Offline
- User ID
- 49
- Join Date
- May 2009
- Location
- Wicklow
- Posts
- 1,681
Originally Posted by Rob32
-
26-05-10, 18:27 #4di Member
- Status
- Offline
- User ID
- 34
- Join Date
- May 2009
- Posts
- 2,143
i donts got a 'high five'... but i gots a 'thumbs up'
-
26-05-10, 18:38 #5di Member
- Status
- Offline
- User ID
- 49
- Join Date
- May 2009
- Location
- Wicklow
- Posts
- 1,681
id say it'll be a while before ya can put that L plate up! so whats your plans then??
Originally Posted by Rob32
-
26-05-10, 18:47 #6di Member
- Status
- Offline
- User ID
- 34
- Join Date
- May 2009
- Posts
- 2,143
ill edit a few posts back to show the updates....but for now.. Originally Posted by Romo
-
26-05-10, 18:59 #7Four doors 4 more whores
- Status
- Offline
- User ID
- 24
- Join Date
- May 2009
- Location
- Dublin
- Posts
- 2,664
Ah shite, have you the front wings on then??
If you can have them off, then move the loom. I don't believe it requires any work as such, just move it out of the arch and above it and cable tie it in, saves damaging it if you go really low. Its on my to-do list when I ever take the wings off!!
Good start man, its like a blank canvas as such. Best way to start. And your only 17 so you have plenty of time to make it pretty
Best of luck with it
-
26-05-10, 19:02 #8di Member
- Status
- Offline
- User ID
- 34
- Join Date
- May 2009
- Posts
- 2,143
sorry updated the whole thing there.. look again Originally Posted by Fredericks Balls
Ah shite, have you the front wings on then??
If you can have them off, then move the loom. I don't believe it requires any work as such, just move it out of the arch and above it and cable tie it in, saves damaging it if you go really low. Its on my to-do list when I ever take the wings off!!
Good start man, its like a blank canvas as such. Best way to start. And your only 17 so you have plenty of time to make it pretty
Best of luck with it
.... this has been done... but how will it not get fooked being up there? against the bonnet?
#
-
26-05-10, 21:24 #9di Member
- Status
- Offline
- User ID
- 22
- Join Date
- May 2009
- Posts
- 1,510
FAIR PLAY LAD!! it good to see you got ur own yoke...
now its my turn to come over and pester you about ur car at drift events
-
26-05-10, 21:29 #10di Member
- Status
- Offline
- User ID
- 38
- Join Date
- May 2009
- Location
- laois
- Posts
- 5,381
this yoke is still going??????
jez we'd some fun in this..
great lock on it and a nice little handbrake...
its been through more hands in the last 4 months
best of luck with it junior
Reply With Quote
