Shallow open ended nuts 1.5mm thread (pic inside)

[2tonne]

did you try east coast alloys?

[1-JAY-Z]

Or slightly bigger spacers?

Ive the spacers bought all I need is these nuts to bolt them on. I bought them 2nd hand there originally for a Nissan so I was supplied with 1.25 nuts but Toyota is 1.5mm so I cant put them on. There 20mm fronts and 25mm rears. Its the fronts that need to be 15mm or smaller the rears are deeper and dosnt matter as much.

[1-JAY-Z]

did you try east coast alloys?

Yep, They only have 1.25 Nissan nuts.

[Driftma]

use nissan wheel studs?

[Mick K]

IceyT would stock them Jay,014019911

[1-JAY-Z]

IceyT would stock them Jay,014019911

Icey who????

[Mick K]

Sorry Icetronix

[Administrator]

Icey who????

IceTronix I'd imagine

[1-JAY-Z]

use nissan wheel studs?

Its hard to explain, I have a spacer, I put spacer on hub, The original toyota hub bolts come through the spacer now I need to bolt the spacer to the hub but I was supplied with 1.25mm thread nuts I need 1.5mm nuts to bolt it on and to make it worse the front ones can only be 15mm in length. The rear are a lot depper in there design as there 25mm wide so not to worried about them ones. After I have the spacers bolted to the car Im going to use Nissan wheel studs to hold the wheel on which I have. Sorry if I sound like im making it out to be black and white but its the easiest way to explain it.

[1-JAY-Z]

Haha i'll give them a shout too thanks! Got word wheels will be here shortly so want to have the spacers ready to give it some more stance!!!