Bit of advice welding......

[Robbie Daly Ps13]

Im in the middle of building a cage for one of me mates........ Have it well on now......... Im not a welder by any means but i have done a bit as the only way to learn is if you go at it..........

My welds from bars to bars and onto the floor plates are bang on there not a problem at all........ Where im having trouble is welding the floor plates onto the car............ Its a bastard to say the least......... I am getting them done but im not happy with the as im a bit of a perfectionst to say the least and it fucking wrecks my head when im doing something and its not right..........

Iv changed all the settings on the welder and fiddeled with the gas but its still a bitch............

Id be greatful for any advice on this from the experts as i really don't know what im doing wrong............!

[Bobbys14]

Im in the middle of building a cage for one of me mates........ Have it well on now......... Im not a welder by any means but i have done a bit as the only way to learn is if you go at it..........

My welds from bars to bars and onto the floor plates are bang on there not a problem at all........ Where im having trouble is welding the floor plates onto the car............ Its a bastard to say the least......... I am getting them done but im not happy with the as im a bit of a perfectionst to say the least and it fucking wrecks my head when im doing something and its not right..........

Iv changed all the settings on the welder and fiddeled with the gas but its still a bitch............

Id be greatful for any advice on this from the experts as i really don't know what im doing wrong............!

Have you the paint cleaned welding where there is paint can be done but its a bitch it will bubble through the weld and mess everything up, any bit of wind will f**k you up too!!

[keith_b]

Needs to be as clean as fuck lad any paint,oil or dirt will make the welds porous. Use a mini grinder with a wire brush and clean it till it shines. Even if theres dirt on the other side when you burn through it will fuck up the weld.

[Robbie Daly Ps13]

Have you the paint cleaned welding where there is paint can be done but its a bitch it will bubble through the weld and mess everything up, any bit of wind will f**k you up too!!

Yea i have her all cleaned off......... Wind never heard of that before but no im in a garage........ Maybe its just me but its fucking recking my head cause i can weld bang on on the bars its just the floor its driving me mad........

[Robbie Daly Ps13]

Needs to be as clean as fuck lad any paint,oil or dirt will make the welds porous. Use a mini grinder with a wire brush and clean it till it shines. Even if theres dirt on the other side when you burn through it will fuck up the weld.

I have it all shiny im using them sanding pads on the end of the mini grinder!There a savage job but now that you said it maybe the underneths dirty.......

Do you think it'd make that big a differance............!

[Bobbys14]

Yea i have her all cleaned off......... Wind never heard of that before but no im in a garage........ Maybe its just me but its fucking recking my head cause i can weld bang on on the bars its just the floor its driving me mad........

Whats happening?

[Robbie Daly Ps13]

Whats happening?

I just can't get cosistant welds on the plates like i can on the bars........ Its goin all outta shape on me and im burning the odd hole in the floor.........!

[Bobbys14]

I just can't get cosistant welds on the plates like i can on the bars........ Its goin all outta shape on me and im burning the odd hole in the floor.........!

Floor skin is a different tickness to your floor plate to get good penatration on the floor plate you'll burn through the floor and to have the welder turned down not to burn through the floor you wont get good penatration on the floor plate, if your determent to weld it in get a happy medium with the settings and keep the wire burning into the floor plate and and just let the weld flow to the floor, dont do a full side of the plate at once because it will head up the floor too much the more you do and you'll get a hole again take brakes and let it cool down..

[keith_b]

On thin plate like the floor your better off spot welding it (weld in small spots) and dont let it get to hot or you will burn through. Let me know how you get on.

[casper]

what are you using mig or tig?