Follow Us On Follow us on Facebook
Register
Results 1 to 10 of 87

Thread: s14.5 project

Hybrid View

  1. #1

    Default s14.5 project

    ok a few weeks back i took a notion and wanted this car
    so after a few calls to frenchy we struck a deal and said bye bye rb hello sr

    since getting it iv made a few tweeks
    iv decided to change the coilovers and run something stiffer
    the wheels from the photo's on on martin laurel so im using a set of rays for the mo but im currently hunting down a new set
    its got a new sparco monza swheel
    dw harnesses

    and on friday i took the head off to make way for a cosworth 1.5mm h/g
    the head is currently off getting pressure tested,skimmed,valve's done etc
    iv ordered all new replacement gaskets,plugs and a nismo thermostat
    ill take photo's later this week



    97 s14a (jap)
    red top sr20 det
    greddy t517z turbo
    gizzmo ebc
    tubular manifold, turbo elbow, downpipe,
    cat bk japspeed exhaust
    nismo clutch
    frnt mount intercooler
    Driftworks Rocker arm stoppers
    cosworth 1.5mm H/G
    arp headbolts
    HSD Monotube Coilovers
    550cc injectors
    apexi power fc
    apexi rsm
    z32 airflow meter
    greddy turbo intake
    3.7 diff (welded)
    3.9 diff (welded)
    4.1 diff (welded)
    4.3 diff (welded)
    Std s14 gearbox
    tein extra lock
    cusco tension rods
    cusco toe arms rear
    cusco camber arms rear
    r34 gtt brakes with project mu pads
    uprated braided brake lines
    nismo fuel pump
    ajustable fuel pressure reg
    dry cell battery and box
    Bride seat
    sparco swade dished steering wheel.
    Driftworks 60mm Race quick release steering spacer
    Driftworks 3"harnesses
    Driftworks braided turbo oil feed
    Greddy boost gauge
    hydralic handbrake
    orimori dash gauge cluster exhaust temp, oil pressure, oil temp.
    6 piont through dash rollcage with door bars (will pass any regs)
    kill switch external pull cable etc.
    frp bonnet vented
    s14/15 frnt wings vented
    works nine front bumper
    uras sides and rear
    widearch rear quarters
    wexican motorsport rear spoiler. (Drag wing)





  2. #2
    Kruizer
    Guest

    Default

    Nice to see you adding your own touches mate, gorgeous car...


  3. #3
    Senior Member
    Status
    Offline
    User ID
    47
    Join Date
    May 2009
    Posts
    9,385

    Default

    As bren said good to see you adding your own stamp on it, sweet spec on her and the yellow is sexy on the 14's see you went with the cosworth gasket aswell.....


  4. #4

    Default

    Quote Originally Posted by Stevo View Post
    As bren said good to see you adding your own stamp on it, sweet spec on her and the yellow is sexy on the 14's see you went with the cosworth gasket aswell.....
    lol it was an extra $15 over the cometic
    i knew you'd say something


  5. #5
    Senior Member
    Status
    Offline
    User ID
    47
    Join Date
    May 2009
    Posts
    9,385

    Default

    Quote Originally Posted by Davie View Post
    lol it was an extra $15 over the cometic
    i knew you'd say something
    Only $15 cant go wrong there davie


  6. #6
    Administrator
    Status
    Offline
    User ID
    11
    Join Date
    May 2009
    Posts
    7,876

    Default

    good stuff on gettign stuck in! please put in real lights though, i hate the look of blanks


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •