R33 engine/r32 gearbox and shaft?

[200sx]

I think im gonna convert the cefiro to a Rb25...will my 32 box and drive shaft blot straight onto the Rb25 or will i have 2 run the 33 box an mod the shaft?

[Quealy]

The engine and box will fit together perfect. A 25 would blow a 20 box to pieces though so i wouldnt recommend it.

[200sx]

The engine and box will fit together perfect. A 25 would blow a 20 box to pieces though so i wouldnt recommend it.

Thanks for that info....altho i couldnt see the 25 blowing it 2 bits as i have had 300+ bhp R32s before with no problems..them RB20 box's aint week...when you look at 180's and what power the sr boxs take and the Rb box is just as strong if not stronger!

[Cooldrft]

A rb20 box should handle up to 350bhp without any problem.
A lot depends on the clutch,tires + type of driving as well of course.

[Quealy]

Well iv broken 2 of em with less than 300 hp. Spose ye'r right though, it was acting the bollox that broke mine. If ya dont do the dog on them they'd probably last away. Ya can also use the rb20 loom on the 25 with some slight modification. Iv done it before so give me a shout if ya need to know anything.

[200sx]

Well iv broken 2 of em with less than 300 hp. Spose ye'r right though, it was acting the bollox that broke mine. If ya dont do the dog on them they'd probably last away. Ya can also use the rb20 loom on the 25 with some slight modification. Iv done it before so give me a shout if ya need to know anything.

yea i might hold ya 2 that lad...i have never done it myself so the info on what 2 change would be great..