Follow Us On Follow us on Facebook
Register
Page 1 of 15 12311 ... LastLast
Results 1 to 10 of 147
  1. #1
    di Member michealkirwan's Avatar
    Status
    Offline
    User ID
    4653
    Join Date
    Jan 2013
    Location
    kilkenny
    Posts
    414

    Default Micheal's S14 turbo project!

    Updated!!!
    Sr20det blacktop non vvt
    forged pistons
    cosworth headgasket
    tomie inlet cam
    hks exhaust cam
    rocker stoppers
    hks valve springs
    alloy winged sump
    ported
    cosworth valves
    cosworth conrods
    was running 360hp

    apex front coilovers and bc rear
    driftworks tension rods
    superpro rear links and anti rollbar bushings
    superpro front antiroll bar bushings
    50mm over fenders
    uras front
    vertex sides
    origin streamline rear
    chargespeed carbon bootlid
    nismo z tune bonnet vent
    Front mount intercooler
    deep dish wheel
    boost guage
    3 inch cat back exhaust
    Stainless manifold
    s14 turbo
    s15 brakes
    18 inch works 9s front 10s rear
    front 25 mm spacer rear 50mm
    Engine damper
    uprated clutch
    cusco 2 way diff

    Full respray in red last year and underside sealed.






    plans are to get the arches filled with new wheels
    fit my omps i have
    sort the cooling as shroud of the car due to front mount need to relocate battery to the boot
    tidy the engine bay and more guages
    got an oil pressure and boost option guages and a new hks mushroom filter, filter fitted


    nct

    Last edited by michealkirwan; 15-02-17 at 14:05.

  2. #2
    di Member garyae86's Avatar
    Status
    Offline
    User ID
    1846
    Join Date
    Sep 2010
    Location
    Leitrim
    Posts
    1,257

    Default

    Great potential in it Micheal looks pretty tidy as it is id be more inclined to keep it that way with a nice set of fat wheels but dont put a bgw on it that's my opinion best of luck with it

    [SIGPIC][/SIGPIC]

  3. #3
    di Member michealkirwan's Avatar
    Status
    Offline
    User ID
    4653
    Join Date
    Jan 2013
    Location
    kilkenny
    Posts
    414

    Default

    thanks gary im just thinking of what wheels will suit?


  4. #4
    Team Chihuahua Kruizer's Avatar
    Status
    Offline
    User ID
    621
    Join Date
    Nov 2009
    Location
    Limerick
    Posts
    3,281

    Default

    Hyper CST's in 18 x 9.5 all round JDM Distro has a shipment coming in soon with them and all, 4 brand new CST's are under €1,100, would pick them over shitty rotas any day...


  5. #5
    di Member mk2glenn's Avatar
    Status
    Offline
    User ID
    2822
    Join Date
    May 2011
    Posts
    267

    Default

    I think Kruizers on the ball there I'd be goin the same lines. Nice car for the money for sure! Needs a bigger back bumper to pull off the kit. Is it a turbo conversion or why has it a non-VVT engine?


  6. #6
    di Member michealkirwan's Avatar
    Status
    Offline
    User ID
    4653
    Join Date
    Jan 2013
    Location
    kilkenny
    Posts
    414

    Default

    thanks glenn im considering wheels ill see cash wise px the advans. need spacers? as advans are 9.5 as is


  7. #7
    di Member michealkirwan's Avatar
    Status
    Offline
    User ID
    4653
    Join Date
    Jan 2013
    Location
    kilkenny
    Posts
    414

    Default

    yes its sr20det on the shell engine was changed id say ive a blacktop as spare anyway


  8. #8
    Junior Member
    Status
    Offline
    User ID
    5807
    Join Date
    Jul 2014
    Posts
    8

    Default

    nice car micheal finally have a s-chassis for the road..best of luck


  9. #9
    di Member michealkirwan's Avatar
    Status
    Offline
    User ID
    4653
    Join Date
    Jan 2013
    Location
    kilkenny
    Posts
    414

    Default

    Ok a bit of an update.
    my passenger headlight full beam had no voltage so gonna run a wire across from driver side
    knock in coilover driver side
    removed the drift bits sticker!
    driver door packed up so hardship to get door open the clip that holds the handle in was loose, fixed.
    wipers acting up stopping at middle of the window?
    need a few interior bits and getting a new washer bottle and fuse cover and that from petko if he has them also new clear side lights
    need a deep rear bumper too in red.
    also will be fitting a turbo timer boost and oil pressure guage plus rsm it already has a fcd i already had these laying around. the speedos not working so rsms for that.
    decided on the wheels i want too work vs will swap the advans for them if i can.
    pass the nct and fit my omps.


  10. #10
    di Member michealkirwan's Avatar
    Status
    Offline
    User ID
    4653
    Join Date
    Jan 2013
    Location
    kilkenny
    Posts
    414

    Default

    Update time!
    went for nct failed on emissions tires wiring a brake hose etc loose bumper



    so done a few bits fixed bumper and hose got two new yokahama advan sports on the front



    then for the back my friend who does the tyres has an rx7 but took these off the back ventus s1 evo stupid wide!!
    285/35/ r18!



    also new pads front and back! may book another test!


 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •